SAR Scenario Quorn Shunter V2

From TrainzOnline
Revision as of 21:17, 12 June 2024 by Pware (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
ArrowLeftBtn.png
 14 
  15   Quorn Shunter 

A scenario in the SAR Peterborough Base Session v2.0

This scenario has been updated in V2.0. For the original V1.0 scenario, click here
ArrowRightBtn.png
 16 
Shunting operations around Quorn yard. This scenario can be continued as the Quorn-Peterborough Empty Fuel Freight and Hawker Weekly Freight scenarios starting from Quorn. Bottom

 When, Where and With What 

Quorn Shunter
 Era:  1920s to 1950s
 Duration:  40 minutes to 1hr 30 min depending on options selected
 Loco:  The Loco Roster Label.png has locos available at the  Quorn Loco Depot 
 Consist:  To be shunted by the selected loco to/from various locations

 Similar/Related Scenarios 

 10   Transcontinental Express Freights  12   Peterborough Shunter  14   Gladstone Shunter
 15   Terowie Shunter  19   Servicing the Broad Gauge Express  


Location Index

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The  Getting Started  guide below gives a summary of what is available.

To display this information click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
  2. If you decide to set the session clock to a different starting time then follow the instructions shown in the Orders section below
  3. Next locate your loco. Either:-
    • Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of your selected loco, for example SAR T 51 (or just T 51 which should be enough), then click the tick icon, OR
    • Open the Driver List (bottom left of the screen) and then scroll through the list to find either:-
    • the loco name (SAR T 51) OR
    • the driver icon (named Driver 51) - this is a non-animated icon
    then click the drivers Eye icon Driver Eye.png to take control of the loco
  4. Take a few moments to get your bearings. Click Quorn Data (this link will open in this window) to show the location details and track plans for Quorn. In each location details page:-
    • the Tab HM White.png tab gives an overall summary of each location with a "potted" history (where available).
    • the Tab TM Grey.png tab reveals the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab lists all active industries and their commodities.
    • the Tab SW Grey.png tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  5. Each location details page has direct links to the adjacent locations so you can explore along the route.
  6. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  7. Switch back to Driver Mode and either close the opening message window or press the  P  key to start the session.


Tutorial:
Tutorial A tutorial on using these scenarios is provided in the link on the left. The link will open in this window


Yard Map:
Yard map
 


Orders:
Perform tasks Ablue.png AND/OR Bblue.png below:-
Ablue.png Assemble empty fuel wagons for scenario  8  Quorn-Peterborough Empty Fuel Freight:-
  1. Move the loco from the  Loco  Depot to the  Fuel  Siding.
  2. Collect the 4 empty Tank wagons stored in the siding and move them onto the  Station  road.
  3. Run the loco around the train
  4. Shunt the wagons back into the  Car Siding  to couple with a Guard Van
  5. Move the consist back onto the  Station  road and run the loco around the train again
  6. Shunt the wagons into  Goods Siding 2  to couple with the fuel tank wagons already stored there.
Bblue.png Assemble freight wagons for scenario  26  Hawker Weekly Freight:-

Note: The Hawker Freight was almost always a short consist but it must include at least one mineral wagon for Hawker

  1. Move the loco from the  Loco  Depot to the Barytes Plant
  2. Collect one or more empty mineral gondolas from the  Barytes Storage Siding  and move them onto  Goods Siding 3 
  3. Optional: Collect one (or more) livestock wagons from the  Stockyard Siding  and attach them to the gondolas stored in  Goods Siding 3 
  4. Optional: Collect any other freight wagons (just a few will do) and attach them to the assembled livestock and/or gondola wagons. Attach a Guard Van to the end
  5. Collect a Guard Van stored on the  Car Siding  and attach it to the rear of the Hawker Freight consist on  Goods Siding 3 
You can then:-
DotPoint1.JPG Terminate the scenario by moving the loco back to the  Loco Depot , OR
DotPoint2.JPG Run the scenario  8  Quorn-Peterborough Empty Fuel Freight (you have already completed most of steps of that scenario), OR
DotPoint3.JPG Run the scenario  26  Hawker Weekly Freight
Logo
The Base Session has the clock set to start at Clock 0800.png
This can be changed to any required time. For the details see WikiLink.PNGSAR Scenario Session Time Change
Strip Map
Route Key


Driving Notes:
  • You have permission to pass signals at stop provided you are satisfied that the road ahead is clear.
  • When driving manually in yards, you are responsible for correctly setting any catch points.
Links: All links will open in this window
ArrowLeftBtn.png
 14 
Scenarios
Scenario Index
Location Index
Location Index
Tutorial
Drive Tutorial
Rolling Stock
Rolling Stock List
Loco Roster
Loco Roster
Industries
Active Industries
Top ArrowRightBtn.png
 16 

This page was created by Trainz user pware in February 2021 and was last updated as shown below.


Personal tools