Latest revision as of 17:22, 30 October 2024

The information in this Wiki Page applies to Trainz Plus, TRS22 and TRS19. This page is intended to provide you with an overview of the properties and features of Routes and Sessions when creating layouts for Trainz. More detailed descriptions of these various features plus instructions on getting you started with creating Routes and Sessions can be found in the Trainz Wiki How To Guides are provided at the end of this document.

1 Trainz Worlds
2 What is a Route?
3 Loading (and Creating) a Route
4 What is a Session?
5 Loading (and Creating) a Session
6 Saving a Route and a Session
7 Exiting Surveyor
8 Exiting Driver
9 Cloning a Route/Session
- 9.1 Cloning Using Surveyor
- 9.2 Cloning Using Content Manager
10 Saving and Loading Driver Games in Driver
11 Deleting Routes and Sessions
12 Trainz Wiki

Workflow Diagrams

Route Workflow diagram

[edit] Trainz Worlds

The virtual worlds that Trainz creates can be classified as:-

Routes

Routes are created in Surveyor and contain most (if not all) of what you will see in your virtual Trainz world. You can have many different routes, limited only by your storage space. They can be built to represent different geographical regions (real or imagined) and different periods of time (past, present, future). They also control the environment settings in your virtual world, such as your geographic location and altitude, the season of the year, lighting conditions and the weather. Each route can have multiple sessions.

Sessions

Sessions are also created in Surveyor but are designed to be run in Driver. They contain the instructions that will control your trains when they are operating in automatic or "AI" mode in your route. They also control the goods your trains will carry, load and unload at industries along the way. You can create different sessions for different aspects of your railway - freight, passenger, shunting or a mixture - or for different seasons of the year or times of the day. Sessions are where you can program the behaviour of objects in your virtual Trainz world. A session can also contain scenery items that are specific to a particular railway operation, season or time of day. Sessions also control the environment settings in your virtual world, such as lighting conditions and the weather. Each session can have multiple saved driver games.

Driver Games (or Driver Sessions or Saved Games)

Driver Games (also known as Driver Sessions and Saved Games) are created in Driver and save the "state of play" in a running session so you can restart it at the same point at a later time. They are optionally stamped with the date and time they were saved and the play duration.

[edit] What is a Route?

A route (also known as a "Layout") consists of most of what you will see on the screen when using Surveyor and Driver. Things such as the landform or terrain, most (if not all) of the scenery items, the ground textures, the effect layers (such as TurfFX and Clutter), plus some "environmental" features.

A route consists of two parts:-

	Route Data and
	Route Layers

When you save a Route, all items in the Route Data and Route Layers will be saved

Route Data:

The Route Data stores all those features that are painted into a layout using a brush tool and all the Environmental Data including the World Origin (latitude, longitude, altitude)

The Route Data includes the Terrain, Textures, Effect Layers, Legacy Water and the Environmental features.

Route Data

Route Data contains:-
	Landforms (Terrain) - baseboards and ground height
	Water height and spread for Legacy Water found in Surveyor Classic
	Ground Textures including the grid pattern which is a texture
	TurfFX, Clutter, Water, Color - found in the Effects Layers (the Color Effect Layer is only available in Trainz Plus when using High Definition (HD))
	Environmental Settings - World Origin (latitude, longitude, altitude), Water Surface (rough/calm/etc), Snow Altitude, Lighting (sun, ambient and water colours), Sky (clouds), Road Traffic (on/off), Date (day, month), Wind strength, Fog level, Weather (rain/fine/snow), Brightness level. You must edit and save the route for these settings to become part of the Route Data - see the Trainz Wiki page How to Use the Environment Tools for more details.

Route Layers:

Route Layers are used to hold the scenery assets that you want to appear in all sessions created for the route

All scenery assets are held in layers. Route Layers (you can have many layers) give you a way of organising or grouping the assets displayed in your route.

Route Layers

Route Layers contain:-
	Track and Track Objects (such as signals, switches, bridges, tunnels, speed signs, etc)
	Most (or all) scenery items (e.g. buildings, trees, rocks, active industries/stations) and scenery splines (e.g. roads, fences, etc)
	Rolling Stock (including locos) - Note: It is strongly recommended that all rolling stock be placed into a Session Layer
	Lineside and Fixed Cameras
	Trackmarks, Triggers, Direction and Priority Marks

Scenery objects can also be stored in a session. This can cause confusion if you load a route without loading a session and find that some scenery items are "missing". See

Loading an Existing Route below for how to deal with this situation.

A detailed description of Layers can be found on the Trainz Wiki Page:-

How to Use Layers

[edit] Loading (and Creating) a Route

The Main Menu screen is shown below. The first option (shown highlighted in the image) opens Driver/Surveyor with all its options including loading and creating a route.

Notes:

Routes:-
	are saved as entries in the Trainz Database, not as files on your hard drive. Loading a route will retrieve it from the database.
	can be loaded directly into Surveyor from Content Manager. See Loading a Route Into Surveyor From Content Manager below
	can be exported as files (in the Trainz .cdp file format) from Content Manager for backup or transfer.

Steps: To Load or Create a Route:-
	Left Click on the large Driver / Surveyor graphic shown highlighted in white in the image on the left

In the Driver/Surveyor screen a strip of thumbnails of all the Routes, installed and as well as available as DLC, will be shown at the base of the screen. If there are too many to fit in the available space, just move the mouse pointer onto any thumbnail to reveal the scroll bar device as shown below.

Left Click and Drag the scroll bar left or right to reveal the additional routes or use the Expand View button described below

	A Left Click on the MAIN MENU button (bottom left) will take you back to the starting or main screen.
	A Left Click on the Sort By A-Z button (top near right) will give you a drop down menu of sorting options for the thumbnail list.
	A Left Click on the Expand View button (top right) will expand the thumbnail list to fill the screen - Left Click it again to return the thumbnails to the strip at the bottom of the screen.

The thumbnail images are colour coded.

Payware on DLC	Must be purchased and downloaded, but some may be free - depending on your membership options. If you click a thumbnail with this colour a DOWNLOAD button will appear on the bottom right of the screen. If a price is included in the button then that is the purchase price (in $US)
Payware installed	Already installed from the DLC. DLC items cannot be deleted. To remove them use the Uninstall option in the Content Store from the Launcher. You can reinstall them later without any additional cost
Installed	Downloaded from the Download Station (DLS) or created by you. This includes any cloned DLC Routes and Sessions (see Cloning a Route/Session below)
Multiplayer	For simultaneous development by multiple players. Special conditions apply

[edit] Creating a New Route

In both Surveyor Classic (also known as S1.0) and in Surveyor 2.0 (also known as S2.0) Left Click on CREATE ROUTE . This will start Trainz Surveyor and create a new blank route using the Default settings (usually those that were used when you last created and saved a route).

Surveyor 2.0 screen shown

	Notes: for Trainz Plus
	the default grid size for a new route is HD (High Definition) Grid
	to convert your new HD Grid route to 5m Grid or to 10m Grid, at any time, see The Marquee Tool for the details
	if you want to convert an existing 5m Grid or 10m Grid route entirely to HD Grid then see Upgrading a Route to HD for the details

	Notes: for TRS19 and TRS22
	the default grid size for a new route is the 10m Grid
	using Surveyor 2.0 (in TRS22PE) to convert your new 10m Grid route to 5m Grid, at any time, see The Marquee Tool for the details
	in Surveyor Classic to convert your new 10m Grid route to 5m Grid, at any time, you will need to individually convert each baseboard

You can easily edit the route settings at any time after the route has been created.

Steps: To edit the route details at any time:-

Open the

Edit menu from the top menu in Surveyor and select the Edit Route... option
The keyboard shortcut is Ctrl + E

It is recommended that you enter some details before you click the

icon to create the new route. A bare minimum is listed on the right that will save you some time and effort later, and you can always change them at any time.

Route name:	Enter a name for your new Route (keep it simple but descriptive)
Geographical region:	Select a region from the drop down list

A Left Click on the icon at the bottom right of the window will apply the new data settings to the single flat baseboard that you have just created.

A Left Click on the

icon at the bottom right of the window will cancel the data entry and continue to use the default data settings (usually the settings entered for the last route you created) in the single flat baseboard currently on the screen.

	Notes:
	Enter a Route name for the route - keep it simple but as descriptive as possible (without writing an essay). This will be the first thing that users will see when looking for a route to download from the DLS.
	Enter a Route description for the route. At the starting stage this is basically a "memory jogger" for you so a basic description would be sufficient but before you release the finished route (e.g. to the DLS) it should contain some critical information such as Trainz Plus only, "high detail assets used" and the source(s) of any non-DLS dependencies
	Setting a Region sets some basic features of the route - such as its latitude (used to determine the season of the year), the altitude (in metres) of the first baseboard, the number and types of moving road vehicles (if any) and the side of the road they drive on, to name a few. If none of the installed regions are suitable you can download others from the DLS or create a region of your own - see How to Create a Region Asset
	Create a Route thumbnail image. At the starting stage this is less important but at some point, before the route is released, select a suitable camera view point and Left Click on the Set Thumbnail button. The thumbnail is an advertisement for the route and many potential users will judge the quality of your work by the thumbnail when deciding whether to download or not
	The Working scale provides measurements that are comparable to model railroading dimensions, but the actual (physical) sizes of the layout and its assets are not altered or scaled down. It is only the Surveyor Ruler and its measurements that will be affected. The choices are between Real scale (which is the default), G scale (100m real scale = 4.4m G scale), HO scale (100m real scale = 1.1m HO scale) and many other options.
	The Working units provides a choice between Metric (metres, kilometres) and Imperial (yards, miles) which only affects measurements used by rulers (in Surveyor 2.0 separate metric and imperial rulers are available), track distances and train speeds (km/h or mph). Note that track speed signs are always locked at either metric (km/h) or imperial (mph) - there are separate speed signs available for each. The signs will not be altered by this selection but their values will be converted. So a track speed sign that is set at 40 mph, for example, will still be displayed as 40 but it will be read as 64.3 km/h in Driver if the Working Units have been set to metric. So it will be less confusing if you use speed signs that are in the same working units as your route, for example use a metric sign showing 65 km/h instead of an imperial sign showing 40 mph. Altitudes are always measured and displayed using metric units (metres).
	The Route Edit Detail in Trainz Plus only. This sets the minimum ground brush size when working with HD Grid. It can be swapped between the two settings at anytime when editing. See SD/HD Options below for more details
	The Draw distance cap sets how far away from the camera that scenery objects will be drawn. A high setting, particularly the Disabled option (which means no draw distance cap), could affect the game performance, including the fps rate (frames per second), on some systems

SD/HD Options

This option, available in Trainz Plus only, allows you to set the route detail when working in HD Grid to the default HD (High Definition) or to a lower SD (Standard Definition) which is easier to work with over larger areas.

The distinction between these two options is:-
HD	This is the full HD Mode where the minimum brush size is 0.12m (12cm)
SD	This is a reduced HD Mode where the minimum brush size is 2m
Both options are using HD resolution and have all the HD controls and features. Both SD and HD can be used in the same baseboard

The setting can be switched during editing without affecting or altering the existing terrain. For example:-
	you can start editing the terrain using the HD Mode to give you the highest level of precision in one area of a baseboard
	then switch to SD Mode to work in another area of the same (or a different) baseboard at a lower level of precision - which would be faster than using the HD Mode
	then switch back to HD Mode to continue working in the same, or another, high precision area

Steps: To switch between HD and SD modes at any time:-

	Left Click on the Main Menu Edit Menu and select the Edit Route... option. The keyboard shortcut is Ctrl + E
	Left Click on either the SD or the HD button
	Left Click on the icon to make the switch

[edit] The Surveyor World View

Depending on the Route Editor settings and the version of Trainz you are using, you may see the following (shown below right but without the added yellow and white labels and descriptive objects).

Each Baseboard is always 720m x 720m (2362.2ft x 2362.2ft) regardless of the Working scale and Working units you have entered

Each baseboard will be made up of:-

	10m x 10m (32.8ft x 32.8ft) grid squares. This is referred to as 10m Grid and is the default setting for new baseboards created using TRS19 and TRS22
	OR
	5m x 5m (16.4ft x 16.4ft) grid squares. This is referred to as 5m Grid
	OR
	0.125m x 0.125m (4.9in x 4.9in) grid squares which are invisible on the screen. This is referred to as HD Grid and is only available in Trainz Plus. It is also the default setting for new baseboards created using Trainz Plus

The baseboard altitude (in metres) will depend on the Geographic region you have selected

The baseboard will be covered with a texture, such as grass or a grid pattern.
This is set by the Geographic region and the selection made in the Ground option from the

Surveyor Display Menu - see Default Baseboard Ground Texture below

[edit] In Surveyor Classic (S10)

Surveyor Classic or S10 is the version of Surveyor found in TRS19, TRS19PE and TRS22. It is one of two versions of Surveyor available in TRS22PE and Trainz Plus.

In Surveyor Classic the baseboards are controlled using the Topology Tools. To open the tools fly-out either Left Click the Topology Tool Tab or press the F1 key.

The Key Topology Tools, as shown in the diagram above, are:-

Add New Baseboard - Left Click (it will stay active until another button is clicked) and then Left Click in a blank area outside the baseboard to add a new baseboard in that position. Each click will add a new baseboard at the same altitude as the first

Delete Baseboard - Left Click (it will stay active until another button is clicked) and then Left Click anywhere on a baseboard to delete that baseboard. You will get a warning dialogue window - you CANNOT undo this operation to restore a deleted baseboard

Grid Size - a pop-out menu will give you a choice of 10m (the default) or 5m. The option for the HD Grid is only available in Trainz Plus. This sets the resolution of the baseboard. It does not alter the size of the grid squares which is actually a painted texture and will always stay at 10m x 10m.

	With a 10m grid the smallest area (resolution) in which you can set a height is 10m x 10m
	With a 5m grid that resolution becomes 5m x 5m, so 4 different height values can be set in each 10m grid. This allows you to create more accurate topology features such as railway cuttings and embankments but it has a penalty, significantly larger route map files
	With a HD grid (in Trainz Plus only) the smallest area (resolution) in which you can set a height is 0.125m x 0.125m. This allows you to create even more accurate topology features but it has a penalty, enormously larger route map files - on average 5x or more larger than 10m grid map files
	Each new baseboard you add will have its grid size set to the selected value. You can have different baseboards set to each resolution - for example: baseboards used by the track at 5m and those further out at 10m This control is also used to change an existing baseboard from one resolution to the other.

Advanced - this will open another window in the Topology Tab that will allow you to select a grey scale bit map image to set the height of each grid

[edit] In Surveyor 2.0 (S20)

Surveyor 2.0 or S20 is an alternative version of Surveyor found in TRS22PE and Trainz Plus. Surveyor Classic is also available as an option in both TRS22PE and Trainz Plus.
In Surveyor 2.0 there is no separate Topology Tools fly-out. A single Tools Palette replaces all the separate tools "fly-outs" found in the original Surveyor Classic.

Steps: To add new baseboards:-
	select the Marquee Tool from the Tools Palette (or press the F key).
Note that in S20 you can add and delete multiple baseboards in a single step, not just one-at-a-time.
	Left Click and Drag (using the Left mouse button) to draw out an area where the new baseboards will be added. This area can include the current baseboard.

The Marquee area, shown with a green border in the image below right, shows the positions where 3 new baseboards will be created to add to the existing baseboard. The Marquee area has a Context Menu icon as shown in the image.

Left Click on the Context Menu icon or press the T key to open up the Marquee Context Menu.

The Key Marquee Baseboard Operations, as shown in the Marquee Context Menu above, are:-

Set Marquee to Brush Height

to create new baseboards in the selected area. The Brush Height is the value stored in the Height setting in the Tool Options palette. This value will be used to set the height of the new baseboards. Any part of the initial baseboard that is covered by the marquee will also have its height set to the brush height

Convert Baseboards to

a pop-out menu will give the options, 10m Grid, or 5m Grid or (for Trainz Plus only) HD Grid. Selecting one of the options will create the new baseboards in the selected resolution. This tool is also used to convert existing baseboards from one resolution to the other.

It is NOT RECOMMENDED that you mix HD Grid baseboards with 5m Grid or 10m Grid baseboards in the same route. It should be ALL HD or none.
See

S20 Tools - Upgrading a Route to HD for more details.

Delete Baseboards in Marquee

to delete the selected baseboards. The Undo command Ctrl + Z will restore the deleted baseboards

[edit] Default Baseboard Ground Texture

When a new route is created or a new baseboard is added in both Surveyor Classic and Surveyor 2.0 it will be covered with the ground texture for the selected Region or the default texture/grid if no region has been set. This can be changed to a different texture (including to the standard TRS19/TRS22 grid pattern).

Steps: To disable the current default ground texture (easiest method):-
	open the Surveyor Display Menu
	select the Ground option
	select the Grid sub-option. This will use the current grid texture.

A more complex solution is to edit an existing Region or create one of your own to add your preferred ground texture (such as the standard TRS22 grid pattern) to each new route you create and every new baseboard that you add.

Notes:

The Baseboard Ground Texture, chosen from the Surveyor Display Menu or by specifying a Region, will become the default for every new route you create and every new baseboard you add, until you change it to something else.

Information on creating and editing Region assets can be found on the Trainz Wiki at:-

How to Create a Region Asset

[edit] Loading an Existing Route

You must first find and select the route to load from those already installed. At the top of the Driver/Surveyor screen the route search options are shown as a set of buttons.

Type:	ROUTES is the default selection. No need to change this.
Source:	PURCHASED is the default selection, Click and change to MY CONTENT for a route you have created (or already modified) or to INSTALLED for one you have downloaded from the DLS.
Region:	ALL is the default selection. You can select a particular geographic region if required and IF the route had a geographic region set when it was created.
Search:	You can narrow down the list of routes by typing the first few letters of its name (e.g. SA) as shown in the image above.

This will produce a display of thumbnails at the bottom of the screen.

Existing Routes

Left Click on the thumbnail for the route you want to load, then Left Click on the EDIT ROUTE button to load the route into Surveyor.

Notes: Routes and Sessions - An Endless Source of Confusion

	Scenery objects that have been placed in a session will NOT APPEAR if the route has been loaded into Surveyor without also loading the session
	If scenery objects have mysteriously vanished when you reload a route into Surveyor it is highly likely that those objects have been saved in a session. You must load the session into Surveyor to make them visible again
	You can easily move most scenery objects from a session into a route if needed - see the Trainz Wiki Page How to Use the Bulk Asset Update/Replace Tool for more details

[edit] Loading a Route Into Surveyor From Content Manager

Trainz provides a shortcut that allows you to load an existing route directly into Surveyor for editing from Content Manager.

Steps: To load a route from Content Manager:-

	in Content Manager select the filter Routes & Sessions
	select the route to be edited
	Right Click to open the Command Menu
	select Open..., then select Edit Asset in Surveyor

[edit] Loading After an Unexpected Shutdown

If you select a route for loading after an unexpected shutdown of Trainz then any route (or route and session) that was open and running in Trainz Surveyor or Driver will be left marked as Open for Edit. When you attempt to load this route into Surveyor or Driver you will see a message listing the route and session (if any) that were affected.

The message is saying that the assets in the list may have been changed since the last time you loaded them and exited Trainz normally. For example if you had been editing the route and/or session and had experienced a crash to the desktop or had used Windows Task Manager to terminate the program.

Note:

A similar message will appear when you load a Driver Game (see Saving and Loading Sessions in Driver below) after editing the original route or session that was used to create the Driver Session.

It is possible that the changes you have made may affect the operation of the Driver Session.

The options you will see are:-

Use changes	Use the edited/changed versions that are in the open database assets. Note: there is a possibility that these assets may have been damaged during the shutdown and may be corrupted
Revert changes	Ignore the edited/changed versions and load the previous versions instead
Cancel	Cancel the Load and return to the Surveyor/Driver menu screen
You could also use the Content Manager program (select Manage Content from the Trainz Launcher) to Submit the open route or route and session assets. This has the risk of replacing the last good copy of that asset or assets with a possibly faulty copy.

[edit] Editing a Route

When a Route is loaded or a new Route is created all the assets you add will be automatically placed into a Route Layer

When you create a new route, or load an existing route without a session, and start adding scenery assets they will automatically be placed into a Route Layer. See How to Use Layers for more details.

Any ground textures, effect layers (e.g. TurfFX, Water, Clutter) you add, or terrain changes (including new baseboards) you make, will be added to the Route Data.

WARNING: Do not edit track in a Route that is occupied by consists in any of the Sessions based on the Route

Moving or deleting a section of track in a Route that is occupied by a consist in a Session can cause the consist to become a "missing asset". This can happen if you load the Route only and not the Session. If a consist becomes a "missing asset" then the only immediate solution is to use the Delete missing assets command from the Tools menu in Surveyor.

Prevention:

if you have the consists placed in a Session then always load the Session, not just the Route, and move or delete any consists BEFORE editing the track they are occupying.

You can edit the Route Characteristics at any time by selecting the Edit Route... option from the

Edit Menu OR simply by pressing the Ctrl + E keys.
This will bring up the Edit Route dialogue window (shown below).

Route Characteristics:-

	Name and Description
	assigned Geographic Region, which sets a number of different features
	Thumbnail image
	Working Scale and Working Units
	Draw Distance

	Route name . Editing this will change the route username in the config.txt file but it will not alter the route <kuid> value
	Region . Changing the region (the Geographic region) selected could affect other features such as the moving road traffic, season of the year (through the latitude tag) and altitude
	Route description . Edit to include additional information or describe changes that have been made
	Route thumbnail . Left Click on the Set Thumbnail button to take a snapshot using the current camera view which will be used as the new thumbnail. The image shown in the example on the left has been edited.
	Working scale . Changing this will only affect the measurement shown in the Surveyor Ruler tool
	Working units . Switching between Metric and Imperial will change how train speeds are calculated and displayed in Driver (in km/h or mph) and the units used by track speed signs
	Route Edit Detail in Trainz Plus only. This sets the minimum ground brush size when working with HD Grid. It can be swapped between the two settings at anytime when editing. See SD/HD Options below for more details

	Draw distance cap will affect how far away from the camera that scenery objects will be drawn. A high setting, particularly the Disabled option (which means no draw distance cap), could affect the game performance, including the fps rate (frames per second), on some systems
	Left Click on the icon to save the entered values and exit back to Surveyor. Left Click on the icon to cancel any entered values and exit back to Surveyor

SD/HD Options

The Surveyor Route Editor will allow you to switch between two minimum brush sizes when working with HD Grid routes.

This option, available in Trainz Plus only, allows you to set the brush detail to the default HD (High Definition) or to a lower SD (Standard Definition) which is easier to work with over larger areas.

The distinction between these two options is:-

HD

This is the full HD Mode where the minimum brush size is 0.12m (12cm). This is the default selection

SD

This is a reduced HD Mode where the minimum brush size is 2m

Both modes:-

	have all the normal HD controls and features
	will work anywhere within the grid squares of a HD Grid route and are not restricted to the grid lines or intersections
	can be used in different areas of the same baseboard

The setting can be switched during editing without affecting or altering the existing terrain. For example:-
	you can start editing the terrain using the HD Mode to give you the highest level of precision in one area of a baseboard
	then switch to SD Mode to work in another area of the same (or a different) baseboard at a lower level of precision - which would be faster than using the HD Mode
	then switch back to HD Mode to continue working in the same, or another, high precision area

Steps: To switch between HD and SD modes at any time:-

	Left Click on the Main Menu Edit Menu and select the Edit Route... option Shortcut: Press Ctrl + E
This will open the Route Editor dialogue window which, in Trainz Plus only, has an additional control, the Route Edit Detail

	Left Click on either the SD or the HD button
	Left Click on the icon at the bottom right of the dialogue window to make the switch

When using SD mode brush sizes less than 2m will be ignored and a 2m brush size will be used instead. Larger brush sizes can be set and used

[edit] Editing the Environment of a Route

You can edit the Environment Controls of a Route by selecting the Edit Environment... option from the Edit Menu.
This will bring up the Edit Environment dialogue window, more commonly called the Environment Tools.

For more details on editing the Environment see the Trainz Wiki Page at The Environment Tools

Environment Controls:-

	lighting conditions
	weather and cloud cover
	water color and water surface (rough, calm, etc) for Legacy Water only
	wind speed (for SpeedTree assets only)
	fog and snow
	season (by the date and latitude)
	road traffic (on or off only)
	world origin (latitude, longitude, altitude)

Notes:

It is possible (and sometimes even expected) that a Route and its Sessions will have different environmental settings - for example the Route may have been created for the summer season but one Session may be set in winter and will require an overcast sky, snow, fog and generally lower light levels. See the Trainz Wiki Page at The Environment Tools for more details.

[edit] Edit Effect Layers

The Edit Effect Layers menu option allows you to add, remove and edit the special effect layers

Effect Layers contain:-
	TurfFX - 3D animated grasses including crops (e.g. wheat)
	Clutter - rocks, stones, small clumps of plants (grasses, flowers, etc)
	Water - a layer of water that covers the entire route but its height can be set to different values to be hidden or revealed throughout the route. It is possible to set a slope on the water (perfect for a water skiing scene 😀)
	Color - a transparent "skin" that covers the ground texture throughout the entire route. Different parts of this layer can be given different colors or "tints" to alter the appearance of the texture below. This is only available for Trainz Plus subscribers when using HD terrain
You can have multiple effect layers of each type (except the color layer) in a route.

	Notes:
	Currently, there are differences in the Effect Layers between Windows and MacOS versions of Trainz. Some of these differences are hardware (GPU) dependant. This means that some of the effect layers or features will not work on the MacOS platform.
	TurfFX is hardware dependent and requires an Nvidia graphics card. TurfFX is an Nvidia software product and is not from N3V.
	The latest versions of Trainz are starting to eliminate these differences and, for performance improvements, are moving the implementation of some effect layers from the CPU to the GPU.

[edit] Merging Routes

Two (or more) separate routes can be joined together (merged) to create a new route

There are some important restrictions on the merging of two routes:-

	Payware (DLC) routes cannot be merged with Freeware (DLS) or other Payware routes
	The Session Data and Session Layers in the first route can be saved in the merger (if required) but those in the other route cannot
	There may be a significant height difference between the two routes and this may not be easy to overcome
	The orientation of the two routes (East-West or North-South) cannot be changed (it is possible but will usually require a lot of time, effort and patience)

A detailed description of the process of Merging Routes can be found on the Trainz Wiki Page:-

How to Merge Routes

[edit] What is a Session?

	A Session is always a part of an existing Route - you cannot have a Session that does not belong to a Route
	If you create a Route without a Session then ALL the active industries and rolling stock, time, environmental conditions, etc, will revert to their original (default) values. There will be no AI drivers and drivers will have a very limited set of available commands for manual driving

In general, while a route provides the physical structures (or "hardware"), a session provides the services (or "software"). While you can easily have a route without a session, it could be a very limited (or even a boring) experience.

A single route can have multiple sessions, or none, but a session must always belong to a route. To put it into Trainz terminology, a session has a route as a dependency.

A session consists of two parts:-

	Session Data and
	Session Layers

When you save a Session, all items in the Session Data and Session Layers will be saved

Session Data:

Session Data are often the "invisibles" that control the operation of a session. Session rules, driver orders and loco assignments, commodities (loaded, unloaded and carried) and most of the Environmental Settings are examples of Session Data.

Session Data

Session Data contains:-
	Drivers (names, AI commands and assigned locos)
	Driver Commands - those available for AI and manual driving
	Session Rules
	Industry Settings (commodities consumed and produced)
	Consist Settings (commodities carried)
	Consist Locations - this is stored in the session even if the consists are placed in the route
	Switch Settings (left/right) - but the default switch direction is stored in the route
	Environmental Settings - Water Surface (rough/calm/etc), Snow Altitude, Lighting (sun, ambient and water colours), Sky (clouds), Road Traffic (on/off), Date (day, month), Wind strength, Fog level, Weather (rain/fine/snow), Brightness level. You must edit and save the session for these settings to become part of the Session Data - see How to Use Environment Tools for more details. If both a route and a session have saved Environmental Settings, which do not have to be the same, then those in the session will be used. If the session does not have any saved Environmental Settings then those in the route will be used

Session Layers:

Session Layers are used to hold the scenery assets that you want to only appear in that particular Session and not in all Sessions. The Session Layers can be left empty and the Route Layers can contain all the scenery assets

Session layers

Session Layers give you a way of organising or grouping the assets displayed in your session.

Session Layers can contain any assets that will be unique to that Session:-

	Scenery
	Rolling Stock (including locos) - Note: It is strongly recommended that all rolling stock be placed into a Session Layer
	Trackmarks, Triggers, Direction and Priority Markers

While it is possible to add track and track objects (bridges, tunnels, turntables, signals, switches, etc) to Session Layers it is NOT RECOMMENDED. These assets should always be placed into Route Layers and, preferably, into the route-layer itself.

A detailed description of Layers can be found on the Trainz Wiki Page:-

How to Use Layers

Notes:

Scenery, Rolling Stock, Triggers and Markers (Track, Direction, Priority) can be used in both Route Layers and Session Layers. Assets placed in a Route Layer will appear in all sessions that are based on the route. The vast majority of (if not all) scenery items will be placed in Route Layers. Assets placed in a Session Layer will only appear in the currently loaded session.

Examples of assets that would be placed in a Session Layer instead of a Route Layer would include:-

	products waiting at a factory for pickup in an industrial session that would not be present in a weekend or holiday passenger session
	signallers holding lanterns in a night session only or standing alongside manual track switch levers in a daylight shunting session
	trackmarks and triggers that are only required in one session but not in all sessions
	crowds of onlookers alongside the track in a session recreating an historic steam train run, together with
	historic rolling stock in a special vintage train session running on a modern route

[edit] Loading (and Creating) a Session

[edit] Creating a New Session

To create a new Session you must first create a new Route or load an existing Route

A route can have many individual sessions so a new session can be added to a route that already has sessions

Steps: To add a new session to an existing route:-
	Locate (but do not load) the route as described in the section Loading an Existing Route above
	Once you have selected the route from its thumbnail, Left Click on the VIEW SESSIONS button
	Then Left Click on the CREATE SESSION button. If no other session exists for this route then this will be the only choice available to you

[edit] Loading an Existing Session

There are two different ways to load existing sessions into Surveyor.

Search For the Session

The easiest way to load an existing session is to use the search tools at the top of the Driver/Surveyor screen.

Type:	ROUTES is the default selection. Left Click on the button to change it to SESSIONS .
Source:	PURCHASED is the default selection, Left Click on the button to change it to MY CONTENT for a session you have created (or already modified) or to INSTALLED for one you have downloaded from the DLS.
Gameplay:	ALL is the default selection. There is no need to change this
Search:	If required you can narrow down the list of sessions by typing the first few letters of its name.

Notes:

Sessions:-
	are saved as entries in the Trainz Database, not as files on your hard drive. Loading a session will retrieve it from the database.
	can be loaded directly into Surveyor from Content Manager. See Loading a Session Into Surveyor From Content Manager below.
	can be exported as files (in the Trainz .cdp file format) from Content Manager for backup or transfer.

This will produce a list of session thumbnails at the bottom of the screen. As with the route thumbnails, the list can be scrolled horizontally.

Existing Sessions

The same colour coding system used in the route thumbnails also applies to session thumbnails.

Payware on DLC	Must be purchased and downloaded, but some may be free - depending on your membership options. If you click a thumbnail with this colour a DOWNLOAD button will appear on the bottom right of the screen. If a price is included in the button then that is the purchase price (in $US)
Payware installed	Already installed from the DLC. DLC items cannot be deleted. To remove them use the Uninstall option in the Content Store from the Launcher. You can reinstall them later without any additional cost
Installed	Downloaded from the Download Station (DLS) or created by you. This includes any cloned DLC Routes and Sessions (see Cloning a Route/Session below)
Multiplayer	For simultaneous development by multiple players. Special conditions apply

Left Click on the thumbnail for the session you want to load and then Left Click on the EDIT SESSION button. This will load BOTH the route and the session into Surveyor.

If the EDIT SESSION option is not present then the selected session is a saved Driver Game (a "game" saved when in Driver) and cannot be edited. See the section Saving and Loading Sessions in Driver below.

OR

Select the Route First

Steps:
	Select the route as described in the section Loading an Existing Route above. Then Left Click on the VIEW SESSIONS button. This will display a list of thumbnails for all the sessions in that route.
	Select the session thumbnail you need and then Left Click on the EDIT SESSION button.

If the EDIT SESSION option is not present then the selected session is a saved Driver Game (a "game" saved when in Driver) and cannot be edited. See the section Saving and Loading Sessions in Driver below.

Both

and

will load the route and session into Surveyor.

[edit] Loading a Session Into Surveyor From Content Manager

Trainz provides a shortcut that allows you to load an existing session directly into Surveyor for editing from Content Manager.

Steps: To load a session into Surveyor:-

	in Content Manager select the filter Routes & Sessions
	select the session to be loaded and edited in Surveyor
	Right Click to open the Command Menu
	select Open... , then select Edit Asset in Surveyor

Both the route and the session will be loaded into Surveyor for editing.

[edit] Loading a Session into Driver From Surveyor

To start Driver simply select a session as described above in Loading an Existing Session and Left Click on the DRIVE SESSION button.

This will load both the session and the route into Driver.

You can save your "game play" in Driver at anytime. See Saving and Loading Sessions in Driver below.

[edit] Loading a Session into Driver From Content Manager

Trainz provides a shortcut that allows you to load an existing session directly into Driver from Content Manager.

Steps: To load a session into Driver from Content manager:-

	in Content Manager select the filter Routes & Sessions
	select the session to drive
	Right Click to open the Command Menu
	select Open... , then select Open Asset in Driver

Both the session and its parent route will be loaded into Driver and the simulation will be started.

[edit] Editing a Session

WARNING:
When a Session is loaded into Surveyor or a new Session is created all the assets you add will be AUTOMATICALLY placed into a Session Layer. To place them in a different layer, for example a Route Layer, change the Active Layer to the required layer before adding them to the route. See the Trainz Wiki Page How to Use Layers for more details.

Any changes made to the Session Rules (including drivers and their commands), the Environment Tools, Industry or Rolling Stock settings, will be added to the Session Data.

There are other changes that will also be added to the Session Data.

You can edit the Session Characteristics at any time by selecting the Edit Session... option from the Edit Menu or by simply pressing Ctrl + R .
This will bring up the Edit Session dialogue window which is more commonly called the Session Editor (shown below).

For more details on editing a Session see the Trainz Wiki Page at The Session Editor - screenshot shown below.

Session Characteristics:-

Name and Description

Session Rules which set:-

	drivers and their consists
	driver commands
	time of day/night
	events
	and much, much more


	You can edit the Name of the Session. This will change the session username in the config.txt file but it will not alter the session <kuid> value
	You can edit the Session Description
	You can add, delete and edit the Session Rules

[edit] Editing the Environment of a Session

You can edit the Environment Controls of a Session by selecting the Edit Environment... option from the Edit Menu.
This will bring up the Edit Environment dialogue window, more commonly called the Environment Tools.

For more details on editing the Environment see the Trainz Wiki Page at The Environment Tools

Environment Controls:-

	lighting conditions
	weather and cloud cover
	water color and water surface (rough, calm, etc) for Legacy Water only
	wind speed (for SpeedTree assets only)
	fog and snow
	season (by the date and latitude)
	road traffic (on or off only)

Notes:

It is possible (and sometimes even expected) that a Route and its Sessions will have different environmental settings - for example the Route may have been created for the summer season but one Session may be set in winter and will require an overcast sky, snow, fog and generally lower light levels. See the Trainz Wiki Page at The Environment Tools for more details.

[edit] Saving a Route and a Session

Routes and Sessions are saved from the System Menu on the Surveyor screen.

Selecting Save or pressing Ctrl + S will save the route, or the route and the session, with the previously entered name(s) when they were loaded or created. You will be asked to confirm both the names (and can change them if you wish) and the Save command.

Selecting Save As... will save the route, or the route and the session, with the previously entered name(s) when they were loaded or created. You will be asked to confirm both the names (and can change them if you wish) and the Save As command.

Notes:

Routes and Sessions:-
	are saved as entries in the Trainz Database, not as files on your hard drive. Loading a route or a session will retrieve it from the database.
	can be loaded directly into Surveyor from Content Manager. See Loading a Route Into Surveyor From Content Manager and Loading a Session Into Surveyor From Content Manager below.
	can be exported as files (in the Trainz .cdp file format) from Content Manager for backup or transfer.

Notes on Saving DLS/DLC Routes and Sessions:

DLS Routes and Sessions can be modified and saved as new routes and sessions

Modifying and Creating:-

	if you have modified a DLS route then you can delete the original route if you no longer need it and your modified version will not be affected
	if you have modified a DLS session then you can delete the original session if you no longer need it and your modified version will not be affected. However, if you delete the original DLS route then your modified session will not work
	you can create a completely new and original session for a DLS route but it will not work if the original DLS route is deleted
	the original DLS routes and sessions will not be altered or replaced by your modified versions

Saving:-

when saved, modified DLS routes and sessions will become Your Content and can be found using the MY CONTENT search option in Surveyor/Driver

Uploading:-

	you can only upload your modified DLS route and session to the DLS if you have the permission of the original creator
	if you have created a completely original session based on a DLS route then you can upload the session as it is your creation

DLC Routes and Sessions can also be modified and saved as new routes and sessions ONLY if the creators of the original DLC content have allowed it - see

Cloning a Route/Session below for more details

Modifying and Creating:-

	some DLC routes and sessions are encrypted and cannot be modified - that is a decision made by the content creator
	your modified DLC route or session will become an alias of the original and will need the original route and session to be present on your system to work
	if you delete or disable the original DLC route or session then your modified versions will not work
	you can create a completely new and original session for a DLC route but it will not work if the original DLC route is deleted or disabled
	the original DLC routes and sessions will not be altered or replaced by your modified versions

Saving:-

	when saved, a modified DLC route or session will become Your Content and can be found using the MY CONTENT search option in Surveyor/Driver
	the original DLC route and session will not be altered or replaced by your modified versions

Uploading:-

you can upload your modified DLC route or session to the DLS but it can only be used by those who also have the same original (unmodified) DLC version installed

[edit] Saving a New Route and Session

If you have created a new route and select Save or Save As..., then you will be presented with the following Save Route Dialogue Windows.


In both cases the name of the route that was entered when it was created will be shown and you can change the name, even in the Save option. However, there is no option in either case to change the name of the created session because the other options have been greyed out and cannot be selected.

[edit] Saving an Existing Route

If you have loaded the route only and not the session and HAVE NOT edited any Session Data or Session Layers, then selecting Save will produce the following Save Route Dialogue Window.


	Settings: Option Overwrite Route Only. This is the default selection so there is nothing to change. Overwrite existing route and: Do not save session the route will be saved (overwritten using its current name) but no session will be saved. Option Overwrite Route and Create a New Session. Tick the box Create new session. Overwrite existing route and: Create new session: enter a name for the session (the suggested name Default is NOT recommended). the route will be saved (overwritten using its current name). a new session will be created using the name you enter and it will be added to the route. because you did not originally load a session, the new session will be saved with default values for all its settings. Option Create a New Route and a "Default Session". Tick the box Save new route and session. Save new route and session: enter a new name for the route. The route will be saved with its new name. the original route will not be changed. a new session will be created using the name Default and it will be added to the new route. because you did not originally load a session, the new session will be saved with the default values for all its settings.
After you have made your selections, Left Click on to Accept or to Cancel

If you have loaded the route only and not the session and HAVE edited Session Data or Session Layers, then selecting Save will produce the following Save Route Dialogue Window.


	Settings: Option Overwrite Route and Create a New Session. This is the default selection so there is nothing to change. Overwrite existing route and: Create new session: enter a name for the session (the suggested name Default is NOT recommended). the route will be saved (overwritten using its current name). a new session will be created using the name you enter and it will be added to the route. The new session will have the settings and changes you have made. Option Overwrite Route Only. Tick the box Do not save session. Overwrite existing route and: Do not save session the route will be saved (overwritten using its current name) but no session will be saved. if you have edited the session and later exit the program without saving those edits (you will be prompted to save the session) then any changes you have made to the session will be lost. Option Create a New Route and a "Default Session". Tick the box Save new route and session. Save new route and session: enter a new name for the route. The route will be saved with its new name. the original route will not be changed. a new session will be created using the name Default and it will be added to the new route. The new session will have the settings and changes you have made.
After you have made your selections, Left Click on to Accept or to Cancel

	Notes:
	If you have edited any session Data or Layers but have selected the option Do not save session then later, before you exit the program, you will be prompted to save the edited session by the appearance of the Save Session dialogue box (see below).
	If you decide to create a new session and leave its name as Default then a new Default Session will be created to add to any others also named Default that may already be present in a route and this will cause confusion. This is why it is not a good idea to use Default as a session name.

[edit] Saving an Existing Route and Session

If you have loaded a route and a session and have edited the route or the route and the session then selecting Save will produce the following Save Route Dialogue Window.


	Settings: Option Overwrite Route and Session. This is the default selection so there is nothing to change. Overwrite existing route and: Overwrite existing session: both the route and the session will be saved (overwritten using their current names). Option Overwrite Existing Route and Create a New Session. Tick the box Create new session. Overwrite existing route and: Create new session: enter a new name for the session. the route will be saved (overwritten using its current name). a new session will be created using the name you enter and it will be added to the existing route. the original session will not be changed. Option Overwrite Route Only. Tick the box Do not save session. Overwrite existing route and: Do not save session the route will be saved (overwritten using its current name) but no session will be saved. if you have edited the session and later exit the program without saving those edits (you will be prompted to save the session) then any changes you have made to the session will be lost. Option Create a New Route and a New Session. Tick the box Save new route and session. Save new route and session: enter a new name for the route. the route will be saved with its new name. a new session will be created using the same name as the original session and it will be added to the new route. the original session and route will not be changed.
After you have made your selections, Left Click on to Accept or to Cancel

	Notes:
	If you have edited any session Data or Layers but have selected the option Do not save session then later, before you exit the program, you will be prompted to save the edited session by the appearance of the Save Session dialogue box (see below).
	If you decide to create a new session and leave its name as Default then a new Default Session will be created to add to any others also named Default that may already be present in a route and this will cause confusion. This is why it is not a good idea to use Default as a session name.

[edit] Saving an Edited Session Only

If you have only edited the session then you will be given the option to save the Session only

If you have loaded a route and a session and have edited the session (Data or Layers) only and not the route, or have already saved the route but not the session, then selecting Save will produce the following Save Session Dialogue Window.


	Settings: Option Overwrite the Session Only. This is the default selection so there is nothing to change. Overwrite existing session the session will be saved (overwritten using its current name). the original route will not be changed. Option Create a New Session. Tick the box Create new session. Create new session: you can enter a new name for the session or use the suggested name which will include the date, time and session runtime. a new session will be created using the name you enter and it will be added to the existing route. the original route and session will not be changed.
After you have made your selections, Left Click on to Accept or to Cancel

[edit] Saving a Route and Session Using the UDS

The UDS feature is available in TRS19 Platinum Edition, Trainz Plus, TRS22 and TRS22 Platinum

The UDS (Unified Driver Surveyor) Interface allows you to quickly switch from Driver to Surveyor and back to Driver again without having to restart the session from the beginning. You can edit a route and session while in Surveyor and then switch back to Driver to continue the session where you left it.

WARNING:

This powerful ability does come with a warning. If you save the edited session before switching back into Driver then all the moving consists will be saved in their new positions. Other changes, such as the status of Session Rules, will also be saved in their new states. See the Trainz Wiki Page How to Use the UDS Interface for more details.

Most of the problems users seem to be experiencing with the UDS, judging from the posts in the Trainz Forums, is when saving their edited Driver session after switching to Surveyor mode.

	Notes:
	Using Driver Mode involves driving consists (either manually or through the AI) and activating rules. These will change the session parameters
	Overwriting the Session will save the consist in their new positions and the Session Rules in their new (completed/not completed) conditions
	When you are in Driver Mode at least one of the consists will probably be moving. Some of the Session rules may have already been completed while others may still be running or waiting for events (e.g. triggers to be activated)
	If, after switching to Surveyor Mode, you then choose to save using the Overwrite existing session option then you will be replacing your original starting Session with a new one with the consists saved in their new positions and the Session rules saved in their new states. So when you later load and restart the Session things will not be the same as they were in the original or starting Session.

Unless you have a particular reason for overwriting the original Session then the recommended save options are:-

Option

Do Not Save the Session

Steps: To save the Route only:-
	Left Click the checkbox Do not save session

This will save the Route only, using its existing name and it will overwrite the original route. This will save any edits that you have made to the Route but not to the Session.

Option

Create a New Session

Steps: To save the Route and a NEW Session:-
	Left Click the checkbox Create new session
	Enter a name for the new session

This will save the Route using its existing name and it will overwrite the original route. It will also save the Session using the name you enter in the text box below the checkbox (Stage 3 in the example shown). The original Session will not be altered. This is useful when you want to test out changes to consists, industry settings, Rules, driver commands, etc but do not want to destroy the original Session.

If you have NOT edited anything while in Surveyor and select Save then you will be shown the Save Driver Session dialogue window to save the session in its current state as a Driver Game (also called a Game or Driver Game). This is exactly the same as pressing Ctrl + S while in Driver.
alte=Save Driver Session

The Driver Game will appear in the Select Session menu for the route. Loading it will resume Driver at the point where it was saved.

[edit] Exiting Surveyor

If you exit Surveyor after editing without saving then you will be prompted to Save.

Steps:

	Open the Main Menu
	select the Exit Surveyor option
Another option is to exit Trainz completely
	select the Exit Game option
Regardless of which option you take, if you have unsaved work you will be prompted to save before you exit

Unsaved Route	Unsaved Session

Options:
	Don't Save will exit Surveyor to either the Main Menu Screen or to your OS Desktop without saving. Any changes you have made will be lost.
	Save will exit Surveyor to either the Main Menu Screen or to your OS Desktop after saving. You will be prompted to select what to save as described in the section Saving a Route and a Session above
	Cancel will cancel the Exit command and return you to Surveyor.

[edit] Exiting Driver

If you exit Driver after running a session you will be prompted to Save a Driver Game.

Steps:

	Open the Main Menu
	select the Exit Driver option
Another option is to exit Trainz completely
	select the Exit Game option
Regardless of which option you take, if your Session Data has changed then you will be prompted to save before you exit

Options:
	Don't Save will exit Driver to either the Main Menu Screen or to your OS Desktop without saving. The current state of the session (positions and movements of the consists, commodity levels, time of day, etc) will be lost.
	Save will exit Driver to either the Main Menu Screen or to your OS Desktop sfter saving. You will be prompted to enter a name for your saved Driver Game. See the section Saving Driver Games below for more details.
	Cancel will cancel the Exit command and return you to Driver.

[edit] Cloning a Route/Session

	A Clone is an exact or duplicate copy of an asset. Some Payware routes and sessions cannot be cloned
	Cloned routes and sessions can be edited and saved as Your Content

Cloning a Route or a Session allows you to work on a duplicate copy of the original. All changes that you make will be saved in the cloned copy leaving the original copy unchanged.

Cloned assets are subject to copyright laws and they remain the property of the original creator

Notes:

Freeware routes, that have been downloaded and installed from the DLS, can be cloned and saved as new routes.

	They are saved with a new <kuid> that will include your personal identity code, so they will become Your Content and can be found using the MY CONTENT search option
	The original route from the DLS will not be altered or replaced by your new version
	You can delete the original DLS route if you wish and your cloned version will NOT be affected

Payware Routes, that have been downloaded and installed from the DLC, can also be cloned as new routes if the creators of the routes allow it.

	Some Payware routes are encrypted and cannot be cloned
	When an approved DLC route is cloned it will be given a new <kuid> that will include your personal identity code, so it will become Your Content and can be found using the MY CONTENT search option
	The original Payware route will not be altered or replaced by your new version
	If you delete or disable the original DLC route then your cloned route will NOT work
	You can upload, depending on permissions, your edited clone of a Payware route to the DLS but it can only be used by other users who also have the same original (unedited) DLC Payware route installed

Sessions that have been downloaded and installed from the DLS (freeware) or DLC (payware) follow the same rules as described for DLS and DLC routes above

	Some Payware sessions are encrypted and cannot be cloned
	When an approved DLC session is cloned it will be given a new <kuid> that will include your personal identity code, so it will become Your Content and can be found using the MY CONTENT search option
	The original DLC or DLS session will not be altered or replaced by your new version
	You can, if you decide, safely delete the original DLS session but not the original DLS route
	If you delete or disable the original DLC session or the original DLC route then your cloned session will NOT work
	You can upload, depending on permissions, your edited clone of a Payware session to the DLS but it can only be used by other users who also have the same original (unedited) DLC Payware installed.

[edit] Cloning Using Surveyor

Routes and Sessions that have been loaded into Surveyor can be cloned using the Save As... command from the Surveyor System Menu

Enter a new name or edit the original name (as shown above) for your cloned route or session.

Options:

If the first option (

Save new route and session) is selected then the Route will be cloned using your new or edited name. The Session will be also cloned using its original name but it will use the newly cloned Route as a dependency instead of the original Route.

	If the original route is Freeware (e.g. from the DLS) and you do not want to keep it then it can be safely deleted, which will also delete the original session but the new cloned route and session will remain active on your system
	If the original route is Payware (e.g. from the DLC) then deleting or disabling it will disable your cloned route and session. When Payware is cloned it must remain active on your system for the clone to work.

If the second option (

Save new session) is selected then only the Session will be cloned using your new or edited name (make sure that you change the "Default" to something else) but it will still use the original (uncloned) Route as a dependency - so it is vital that you DO NOT DELETE the original route.

	If the original session is Freeware then it can be safely deleted if you no longer need it
	If the original session is Payware then deleting or disabling it will also disable your cloned session

[edit] Cloning Using Content Manager

Select the Route or Session to Clone

Steps:

In Content Manager select the filter Routes & Sessions

select the route or session to be cloned

then either:-

Options:-

	from the Content Menu select Clone OR
	press Ctrl + D

A Task Window will open to display the result.
Clone task completed

In the image above the original Route has been cloned and given a new <kuid> value.

The newly cloned Route will be shown in Content Manager as a New Asset that is Open for Editing.

Steps:

	close the Task Window
	select the Open for Editing filter.

Rename the Clone (an Optional Step)
You can give the cloned Route or Session a new name and a new description. Note that these changes will not appear until after the New Asset has been submitted.

Steps:

	Right Click the New Asset
	select Open...
	select Edit Config File Text

The config.txt file will open in your default text editor. You can then edit both the Title (username) and the Description of the Route or Session

	locate the line that starts with username
	edit the text on that line between the Quote (") marks (but do not delete the quote marks) to change it to the new name of this Route/Session
	locate the line that starts with description
	edit the text on that line between the Quote (") marks (but do not delete the quote marks) to edit the description of this Route/Session
	save (usually Ctrl + S )
	exit the text editor

Submit the Clone (a Necessary Step)

When submitted a cloned DLC Route or Session will be described as Payware, Modified while a cloned DLS Route or Session will be described as Modified

Steps:

	Right Click on the New Asset
	select the option Submit Edits

The New Asset entry will vanish from the Open for Editing display. Open the Content Manager filter Today to check that it has been correctly submitted. If you have renamed the clone then it should appear using its new name.

Notes:

You can rename a cloned Route or a cloned Session in Surveyor but the clone would still have to be submitted in Content Manager first using its original name and then loaded into Surveyor. You would then have two Routes or Sessions with the same name to select from - one would be the original and the other the clone, and telling them apart may not be simple. You can use the Driver/Surveyor main screen MY CONTENT source filter to locate and load the correct cloned Route or Session because the clone will have your <kuid> code and not its original code.

Load the cloned Route or Session into Surveyor, then

	to rename a route open the Edit menu and select the Edit Route... option, OR press Ctrl + E - see Editing a Route above
	to rename a session open the Edit menu and select Edit Session, or press Ctrl + R - see Editing a Session above

Both will also allow you to edit the Name and Description of the cloned Route/Session.

[edit] Saving and Loading Driver Games in Driver

Driver Games (sometimes called "Saved Games" or "Driver Sessions") are "Game States" saved while in Driver Mode

Notes:

Driver Games:-
	like routes and sessions, are saved as entries in the Trainz Database, not as files on your hard drive. Loading a driver game will retrieve it from the database.
	can be loaded directly into Driver from Content Manager in exactly the same way that Sessions can be loaded directly into Driver from Content Manager
	can be exported as files (in the Trainz .cdp file format) from Content Manager for backup or transfer.

[edit] Saving Driver Games

Driver Games save the "state of play" in Driver - the position of consists, the commodities and levels in rolling stock and industries, the state of the Driver Command queues, Session Rules, clock time, etc. Once saved, the Driver Game can be loaded back into Driver to continue the play at the point where it was saved.

When you are in Driver select Save from the System Menu or press Ctrl + S .

This will display the Save Driver Session dialogue window showing the name of the current session with a date and time stamp (shown left below). If you Left Click pn the Tick then this will be the name used for the saved game. Alternatively, you could enter your own unique name (shown right below).

The space below the entered name will display any other saved driver games for that session.

[edit] Loading Driver Games

Saved driver games will be shown with their sessions for a selected route. The section Loading an Existing Session shows two different methods of displaying saved sessions and their driver games.

Method will display ALL the saved sessions and driver games which may be a very long list.
Method will display ALL the saved sessions and driver games for a selected route, which should be a much shorter list.

If using Method

select the route first and then click the VIEW SESSIONS button. This will display a list of thumbnails for all the sessions and driver games in that route.

Load Driver Game

	Notes:
	Where a route has multiple sessions and driver games they will all be shown by their thumbnails with no way of telling which driver games belong to which session.
	It can also be difficult to tell which thumbnail is a session and which is a Driver Game, especially if you have removed the date/time stamp Trainz automatically adds to the name of a Driver Game. A simple way to tell is to Left Click on a thumbnail to see if the EDIT SESSION button is still visible. If it is not, because driver games cannot be edited, then the thumbnail is for a Driver Game.

Where there is only one session in a route, the session will be the first thumbnail shown in the list followed by the driver games. Note that the session is selected by default.

Select (hightlight) the Driver Game you want to load and then Left Click on the DRIVE SESSION button.

This will load the Driver Game, the session and the route into Driver.

If you load a Driver Game after you have edited the original route or session that was used to create it, then you will receive a message warning you that changes have been made to the original assets. The changes could affect the operation of the Driver Game.

Options:-

	Cancel - the Driver Game will NOT be loaded, OR
	Ok - load the Driver Game wirh the changes

If the changes to the route or session have been:-

	minor and non-operational, such as scenery assets (trees, buildings, etc) then the Driver Game can be safely loaded.
	more significant operational changes, such as triggers, trackmarks, active industries, consists, tracks, etc, then it may NOT be wise to load and run the Driver Game.

Only you can be the judge but I would err on the side of caution

[edit] Editing Driver Games

It is possible to load and edit a saved Driver Game in versions of Trainz that have the UDS (Unified Driver Surveyor) interface - these versions are TRS19 Platinum, Trainz Plus, TRS22 and TRS22 Platinum. However, when you save your edit, it will NOT be saved as an update to the loaded Driver Game. Instead it will be saved as a Session. You can select to create a new session or to overwrite the original session.

The Session will be saved with all the:-

	consists in their positions and states (stationary or moving) at the time of the save
	industries and rolling stock in their conditions (e.g. product levels) at the time of the save
	switches in their state at the time of the save, and
	session rules in their state (completed or not completed) at the time of the save

[edit] Deleting Routes and Sessions

	Deleting a Route will delete that Route, all its Sessions and all its Driver Games (if any)
	Deleting a Session will delete that Session and its Driver Games (if any). It will NOT delete the Route it was created from. It will NOT delete other Sessions created for that Route. It will NOT delete any other Driver Games created for those other Sessions
	Deleting a Driver Game will only delete that Driver Game. It will NOT delete the Route or Session it was created from or any other Driver Games from that Session

All the Surveyor and Driver screens for loading routes and sessions have a DELETE ... button as an option.

	WARNING:
	If you delete a Route you will also delete all the Sessions and Driver Games created using that Route
	If you delete a Session you will also delete all the Driver Games created using that Session

If you need a more selective way of deleting routes, sessions and driver games, then use Content Manager from the Trainz Launch Screen. Select the Filter Routes & Sessions.

CM list of routes and sessions

The Type column will identify each entry as a route, session or Misc. Misc in this case means a saved Driver Game.

You can delete routes and/or sessions individually but if you delete a route by itself then its dependant sessions and driver games will be shown as faulty with Missing dependencies. Likewise, if you delete a session by itself then its dependant driver games will be shown as faulty with Missing dependencies.

[edit] Trainz Wiki

Route and Session Building Guides

More Tutorials and Guides to Using Trainz

Related Links

This page was created by Trainz user pware in September 2021 and was last updated as shown below.

@@ Line 14: / Line 14: @@
 <tr valign="top">
 <td>
-The information in this Wiki Page applies to '''TRS19''', '''Trainz Plus''', '''TRS22''' and '''TRS22 Platinum'''. This page is intended to provide you with an overview of the properties and features of '''Routes''' and '''Sessions''' when creating layouts for Trainz. More detailed descriptions of these various features plus instructions on getting you started with creating '''Routes''' and '''Sessions''' can be found in the Trainz Wiki '''How To Guides''' - links are provided at the end of this document.</td>
+The information in this Wiki Page applies to '''Trainz Plus''', '''TRS22''' and '''TRS19'''. This page is intended to provide you with an overview of the properties and features of '''Routes''' and '''Sessions''' when creating layouts for Trainz. More detailed descriptions of these various features plus instructions on getting you started with creating '''Routes''' and '''Sessions''' can be found in the Trainz Wiki '''How To Guides''' are provided at the end of this document.</td>
 </tr>
 </table>
@@ Line 88: / Line 88: @@
 <table width=1000>
 <tr valign="top">
-<td colspan=2>A route (also known as a "Layout") consists of most of what you will see on the screen when using '''Surveyor''' and '''Driver'''. Things such as the landform or terrain, most (if not all) of the scenery items, the ground textures, the effect layers (TurfFX and Clutter), plus some "environmental" features.<br><br>
+<td colspan=2>A route (also known as a "Layout") consists of most of what you will see on the screen when using '''Surveyor''' and '''Driver'''. Things such as the landform or terrain, most (if not all) of the scenery items, the ground textures, the effect layers (such as TurfFX and Clutter), plus some "environmental" features.<br><br>
 A route consists of two parts:-</td>
 </tr>
+</table>
+<table width=700>
+<tr valign="top">
+<td>
+<table width=300>
 <tr valign="top">
 <td width=25>[[image:Ablue.png|link=]]</td>
@@ Line 101: / Line 107: @@
 </tr>
 </table>
-<br>
+</td>
-<table width=1000 bgcolor="lightcyan" cellpadding=2>
+<td>
+<table width=400 bgcolor=#000000 cellpadding=2>
 <tr valign="top">
-<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>
-<td>'''When you save a Route, all the items in the Route Data and Route Layers will be saved'''</td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td>'''When you save a Route, all items in the Route Data and Route Layers will be saved'''</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 143: / Line 158: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>'''TurfFX, Clutter and Water''' - found in the '''Effects Layers''' (including the '''Water Effects Layer''' found in '''Trainz Plus''' and '''TRS22''')</td>
+<td>'''TurfFX, Clutter, Water, Color''' - found in the '''Effects Layers''' (the '''Color Effect Layer''' is <span style="background-color: yellow;">only available in '''Trainz Plus''' when using '''High Definition (HD)'''</span>)</td>
 </tr>
 <tr valign="top">
@@ Line 238: / Line 253: @@
 <table width=1000>
 <tr valign="top">
-<td colspan=2>The Main Menu screen is shown below. The first option (shown highlighted in the image) opens '''Driver/Surveyor''' with all its options including loading and creating a route.</td>
+<td colspan=2>The '''Main Menu''' screen is shown below. The first option (shown highlighted in the image) opens '''Driver/Surveyor''' with all its options including loading and creating a route.</td>
 </tr>
 <tr valign="top">
@@ Line 262: / Line 277: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>can be loaded directly into '''Driver''' from '''Content Manager'''. See [[image:PageLink.PNG|link=]] '''[[#Loading a Route Into Surveyor From Content Manager|Loading a Route Into Surveyor From Content Manager]]''' below</td>
+<td>can be loaded directly into '''Surveyor''' from '''Content Manager'''. See [[image:PageLink.PNG|link=]] '''[[#Loading a Route Into Surveyor From Content Manager|Loading a Route Into Surveyor From Content Manager]]''' below</td>
 </tr>
 <tr valign="top">
@@ Line 270: / Line 285: @@
 </table>
 </td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To Load or Create a Route:-</td>
+</tr>
+<tr valign="top">
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the large <span style="font-weight: 700; font-size: 15px;">Driver / Surveyor</span> graphic shown highlighted in white in the image on the left</td>
 </tr>
 </table>
@@ Line 279: / Line 310: @@
 <tr valign="top">
 <td colspan=2><br><br>
-In '''Driver/Surveyor''' a strip of thumbnails for all the installed Routes will be shown at the base of the screen. If there are too many to fit in the available space, just move the mouse pointer onto any thumbnail to reveal the scroll bar device as shown below.<br>
+In the '''Driver/Surveyor''' screen a strip of thumbnails of all the Routes, installed and as well as available as '''DLC''', will be shown at the base of the screen. If there are too many to fit in the available space, just move the mouse pointer onto any thumbnail to reveal the scroll bar device as shown below.<br>
 [[image:TRS19SelectRoute.png|link=|alt=TRS19 Main Screen Route Selection]]<br><br></td>
 </tr>
@@ Line 343: / Line 374: @@
 </tr>
 </table>								<!-- END Nav Buttons Table -->
-On the '''Driver/Surveyor''' screen the route options are shown as a set of buttons at the bottom of the screen.
-===<span style="font-weight: 700; font-size 15px; color: black; background-color: lightcyan;">&#160;In Surveyor Classic (S10)&#160;</span>===
 [[image:RouteButtonsCreate.png|link=|alt=Create a New Route]]
@@ Line 352: / Line 379: @@
 <table width=1000>
 <tr valign="top">
-<td colspan=2>In '''Surveyor Classic''' (also known as '''S10'''), which is supplied with '''TRS19''' and '''TRS22''' and is an option in '''Trainz Plus/TRS22 Platinum''', <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> <span style="background-color: black; color: white; font-weight: 700; font-size: 15px;">&#160;CREATE ROUTE&#160;</span>. This will start Trainz '''Surveyor''' and open the '''New Route Dialogue Window'''.
+<td colspan=2>In both '''Surveyor Classic''' (also known as '''S1.0''') and in '''Surveyor 2.0''' (also known as '''S2.0''') <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on <span style="background-color: black; color: white; font-weight: 700; font-size: 15px;">&#160;CREATE ROUTE&#160;</span>. This will start Trainz '''Surveyor''' and create a new blank route using the '''Default''' settings (usually those that were used when you last created and saved a route).</td>
-<table width=1000>
+</tr>
 <tr valign="top">
-<td width=400>[[image:RouteNewWindow.png|link=|alt=New Route dialogue window]]</td>
+<td width=490 align="center">[[image:S20_SurveyorScreen.png|490px|link=]]<br>
+'''Surveyor 2.0 screen shown'''</td>
 <td>
-<table width=600 cellpadding=2 bgcolor=#000000>
+<table bgcolor=#000000 cellpadding=2>
 <tr valign="top">
 <td>
-<table cellpadding=2 bgcolor=#ffffe0>
+<table bgcolor=#ffffb0 cellpadding=2>
 <tr valign="top">
-<td>[[image:PencilTips.PNG|link=]]</td>
+<td width=25>[[image:NotePad.PNG|link=]]</td>
-<td>All these settings plus others can be easily changed at any time after the route has been created.
+<td><span style="font-size: 17px;">'''Notes: for Trainz Plus'''</span><br>
-<table>
+----
-<tr>
+</td>
-<td>[[image:RouteEdit.png|link=|alt=Route edit]]</td>
+</tr>
-<td>From the '''Edit''' menu select '''Edit Route''' or press <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span><br><br>
+<tr valign="top">
-For more details see '''[[image:PageLink.PNG|link=]]&#160;[[#Editing a Route|Editing a Route]]''' below.</td>
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''default''' grid size for a new route is '''HD (High Definition) Grid'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>to convert your new '''HD Grid''' route to '''5m Grid''' or to '''10m Grid''', at any time, see [[image:WikiLink.PNG|link=]]&#160;'''[[How to Use S20 Tools#The Marquee Tool|The Marquee Tool]]''' for the details</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>if you want to convert an existing '''5m Grid''' or '''10m Grid''' route entirely to '''HD Grid''' then see [[image:WikiLink.PNG|link=]]&#160;'''[[How to Use S20 Tools#stepUpgrading|Upgrading a Route to HD]]''' for the details</td>
 </tr>
 </table>
@@ Line 374: / Line 411: @@
 </tr>
 </table>
+<br>
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffb0 cellpadding=2>
+<tr valign="top">
+<td width=25>[[image:NotePad.PNG|link=]]</td>
+<td><span style="font-size: 17px;">'''Notes: for TRS19 and TRS22'''</span><br>
+----
 </td>
+</tr>
+<tr valign="top">
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the '''default''' grid size for a new route is the '''10m Grid'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>using '''Surveyor 2.0''' (<span style="font-weight: 700; background-color: yellow;">in TRS22PE</span>) to convert your new '''10m Grid''' route to '''5m Grid''', at any time, see [[image:WikiLink.PNG|link=]]&#160;'''[[How to Use S20 Tools#The Marquee Tool|The Marquee Tool]]''' for the details</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>in '''Surveyor Classic''' to convert your new '''10m Grid''' route to '''5m Grid''', at any time, you will need to individually convert each baseboard</td>
 </tr>
 </table>
-It is '''recommended''' that you enter some details before you click the [[image:Tick.PNG|link=|alt=Tick]] icon to create the new route. A '''bare minimum''' is listed below that will save you some time and effort later, and you can always change them at any time.
+</td>
-<table bgcolor=#000000 cellpadding=2>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table width=1000>
+<tr valign="top">
+<td width=500>[[image:RouteEditWindow_S20.png|link=]]</td>
+<td>
+<table width=500 cellpadding=2 bgcolor=#000000>
+<tr valign="top">
+<td>
+<table cellpadding=2 bgcolor=#ffffff>
+<tr valign="top">
+<td>You can easily edit the route settings at any time after the route has been created.
+<table>
 <tr valign="top">
 <td>
 <table bgcolor=#ffffff cellpadding=2>
 <tr valign="top">
-<td width=175><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route name:&#160;</span></td>
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To edit the route details at any time:-</td>
-<td>Enter a name for your new Route (keep it simple)<br></td>
 </tr>
 <tr valign="top">
-<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Session name:&#160;</span></td>
+<td>
-<td>Enter a name for your Session (again keep it simple) - see '''Notes:''' below<br></td>
+<table>
-</tr>
 <tr valign="top">
-<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Geographical region:&#160;</span></td>
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
-<td>Select a region from the drop down list</td>
+<td>Open the [[image:EditMenu_S20.png|link=]] '''Edit''' menu from the top menu in Surveyor and select the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit&#160;Route...&#160;</span> option<br>
+The keyboard shortcut is <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span></td>
+</tr>
+</table>
+</td>
+<td>[[image:EditMenuOptions_S20.png|link=]]</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
 </td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table>
+<tr valign="top">
+<td width=495>It is '''recommended''' that you enter some details before you click the [[image:Tick.PNG|link=|alt=Tick]] icon to create the new route. A '''bare minimum''' is listed on the right that will save you some time and effort later, and you can always change them at any time.</td>
+<td width=10>&#160;</td>
+<td>
+<table width=500 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table width=496 bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td width=175><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route name:&#160;</span></td>
+<td>Enter a name for your new Route (keep it simple but descriptive)<br></td>
+</tr>
+<tr valign="top">
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Geographical region:&#160;</span></td>
+<td>Select a region from the drop down list</td>
 </tr>
 </table>
@@ Line 407: / Line 512: @@
 <table width=1000>
 <tr valign="top">
-<td width=400>[[image:RouteSARWindowDots.png|link=|alt=Route Details]]</td>
+<td width=500>[[image:RouteEditWindowExample_S20.png|link=]]<br><br>
-<td width=600>
+A <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the [[image:Tick.PNG|link=|alt=Tick]] icon at the bottom right of the window will apply the new data settings to the single flat baseboard that you have just created.<br>
-<table width=600 bgcolor=#000000>
+A <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the [[image:Cross.PNG|link=|alt=Cross]] icon at the bottom right of the window will cancel the data entry and continue to use the '''default''' data settings (usually the settings entered for the last route you created) in the single flat baseboard currently on the screen.</td>
+<td>
+<table width=500 bgcolor=#000000>
 <tr valign="top">
 <td>
@@ Line 421: / Line 528: @@
 <tr valign="top">
 <td>[[image:DotPoint1.JPG|link=]]</td>
-<td>You do not have to add a <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Session name&#160;</span> but when you save a new route without a named session a default session will be automatically saved with the name '''Default'''. This can later cause confusion if a multitude of different '''Default Sessions''' appear so it is '''recommended''' that a unique '''Session name''' be entered at this point.</td>
+<td>Enter a <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Route name&#160;</span> for the route - keep it simple but as descriptive as possible (without writing an essay). This will be the first thing that users will see when looking for a route to download from the DLS.</td>
-</tr>
-<tr valign="top">
-<td>&#160;</td>
-<td>A session can always be deleted later if you have no interest in creating one for your route - see '''[[image:PageLink.PNG|link=]]&#160;[[#Deleting Routes and Sessions|Deleting Routes and Sessions]]''' below. However a route with a session does have some important advantages - see '''[[image:PageLink.PNG|link=]]&#160;[[#What is a Session?|What is a Session?]]''' below.</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint2.JPG|link=]]</td>
-<td>Setting a <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Geographical region&#160;</span> sets some basic features of the route - such as its latitude (used to determine the season of the year), the altitude (in metres) of the first baseboard, the number and types of moving road vehicles (if any) and the side of the road they drive on, to name a few. If none of the installed regions are suitable you can download others from the '''DLS''' or create a region of your own - see '''[[image:WikiLink.PNG|link=]]&#160;[[How to Create a Region Asset|How to Create a Region Asset]]'''</td>
+<td>Enter a <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Route description&#160;</span> for the route. At the starting stage this is basically a "memory jogger" for you so a basic description would be sufficient but before you release the finished route (e.g. to the '''DLS''') it should contain some critical information such as '''Trainz Plus only''', "high detail assets used" and the source(s) of any non-DLS dependencies</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint3.JPG|link=]]</td>
-<td>The <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working scale&#160;</span> provides measurements that are comparable to model railroading dimensions, but the actual (physical) sizes of the layout and its assets are not altered or scaled down. It is only the '''Surveyor Ruler''' tool that will be affected. The choices are between '''Real scale''' (which is the default), '''G scale''' (100m real scale = 4.4m G scale), '''HO scale''' (100m real scale = 1.1m HO scale) and many other options.</td>
+<td>Setting a <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Region&#160;</span> sets some basic features of the route - such as its latitude (used to determine the season of the year), the altitude (in metres) of the first baseboard, the number and types of moving road vehicles (if any) and the side of the road they drive on, to name a few. If none of the installed regions are suitable you can download others from the '''DLS''' or create a region of your own - see '''[[image:WikiLink.PNG|link=]]&#160;[[How to Create a Region Asset|How to Create a Region Asset]]'''</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint4.JPG|link=]]</td>
-<td>The <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working units&#160;</span> provides a choice between '''Metric''' (metres, kilometres) and '''Imperial''' (yards, miles) which only affects measurements used by rulers and track distances, and for train speeds ('''km/h''' or '''mph''').<br>
+<td>Create a <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route thumbnail&#160;</span> image. At the starting stage this is less important but at some point, before the route is released, select a suitable camera view point and <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Set Thumbnail&#160;</span> button. The thumbnail is an advertisement for the route and many potential users will judge the quality of your work by the thumbnail when deciding whether to download or not</td>
-Note that '''track speed signs''' are always locked at either metric (km/h) or imperial (mph) - there are separate speed signs available for each. The signs will not be altered by this selection but their values will be converted. So a track speed sign that is set at 40 mph, for example, will still be displayed as '''40''' but it will be read as 64.3 km/h in '''Driver''' if the '''Working Units''' have been set to '''metric'''. So it will be less confusing if you use speed signs that are in the same working units as your route, for example use one set for '''65''' km/h instead of '''40''' mph.<br>
+</tr>
-Altitudes are always measured and displayed using '''metric''' units (metres).</td>
+<tr valign="top">
+<td>[[image:DotPoint5.JPG|link=]]</td>
+<td>The <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working scale&#160;</span> provides measurements that are comparable to model railroading dimensions, but the actual (physical) sizes of the layout and its assets are not altered or scaled down. It is only the '''Surveyor Ruler''' and its measurements that will be affected. The choices are between '''Real scale''' (which is the default), '''G scale''' (100m real scale = 4.4m G scale), '''HO scale''' (100m real scale = 1.1m HO scale) and many other options.</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint6.JPG|link=]]</td>
+<td>The <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working units&#160;</span> provides a choice between '''Metric''' (metres, kilometres) and '''Imperial''' (yards, miles) which only affects measurements used by rulers (in '''Surveyor 2.0''' separate metric and imperial rulers are available), track distances and train speeds ('''km/h''' or '''mph''').<br>
+Note that '''track speed signs''' are always locked at either metric (km/h) or imperial (mph) - there are separate speed signs available for each. The signs will not be altered by this selection but their values will be converted. So a track speed sign that is set at 40 mph, for example, will still be displayed as '''40''' but it will be read as 64.3 km/h in '''Driver''' if the '''Working Units''' have been set to '''metric'''. So it will be less confusing if you use speed signs that are in the same working units as your route, for example use a metric sign showing '''65''' km/h instead of an imperial sign showing '''40''' mph.<br>
+Altitudes are '''always measured and displayed''' using '''metric''' units (metres).</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint7.JPG|link=]]</td>
+<td>The <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route Edit Detail&#160;</span> <span style="background-color: yellow;">in '''Trainz Plus''' only</span>. This sets the minimum ground brush size when working with '''HD Grid'''. It can be swapped between the two settings at anytime when editing. See <span style="font-weight: 700; font-size: 15px; color: white; background-color: blue;">&#160;SD/HD Options&#160;</span> below for more details</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint8.JPG|link=]]</td>
+<td>The <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Draw distance cap&#160;</span> sets how far away from the camera that scenery objects will be drawn. A high setting, particularly the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Disabled&#160;</span> option (which means no draw distance cap), could affect the game performance, including the '''fps''' rate (frames per second), on some systems</td>
 </tr>
 </table>
@@ Line 451: / Line 570: @@
 <table width=1000>
 <tr valign="top">
-<td>A <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the [[image:Tick.PNG|link=|alt=Tick]] icon at the bottom right of the '''New Route''' window will create a new route with a single flat '''baseboard''' using the data settings you have entered.<br>
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: blue;">&#160;SD/HD Options&#160;</span></td>
-A <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the [[image:Cross.PNG|link=|alt=Cross]] icon on the top right of the '''New Route''' window will cancel the data entry and create a new route with a single flat '''baseboard''' using the '''default''' data settings (usually the settings entered for the last route you created).</td>
 </tr>
-</table>
+<tr valign="top">
-<br>
+<td>[[image:RouteEditDetailHD_S20.png‎|link=]]<br>
-===<span style="font-weight: 700; font-size 15px; color: white; background-color: blue;">&#160;In Surveyor 2.0 (S20)&#160;</span>===
+This option, <span style="background-color: yellow;">available in '''Trainz Plus''' only</span>, allows you to set the route detail when working in '''HD Grid''' to the default '''HD''' (High Definition) or to a lower '''SD''' (Standard Definition) which is easier to work with over larger areas.<br>
-<table width=1000>
+<table>
 <tr valign="top">
-<td>In '''Surveyor 2.0''' (also known as '''S20'''), which is supplied with '''Trainz Plus/TRS22 Platinum''', <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> <span style="background-color: black; color: white; font-weight: 700; font-size: 15px;">&#160;CREATE ROUTE&#160;</span>. This will start Trainz '''Surveyor''' and move straight into the '''Surveyor World View''' screen.<br><br>
+<td>
+<table width=500 bgcolor=#000000 cellpadding=2>
-If you want to edit any of the '''Route''' settings then open the '''Route Editor''' (select <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Route&#160;</span>) from the '''Main Menu''' or press <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span>.<br><br>
+<tr valign="top">
-This will display the same '''Route Editor Dialogue Window''' as shown above but it will be named '''Edit Route'''.</td>
+<td>
-<td>[[image:RouteEdit.png|link=|alt=Route edit]]</td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2>The distinction between these two options is:-</td>
+</tr>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;HD&#160;</span></td>
+<td>This is the full '''HD Mode''' where the minimum brush size is '''0.12m''' (12cm)</td>
+</tr>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;SD&#160;</span></td>
+<td>This is a reduced '''HD Mode''' where the minimum brush size is '''2m'''</td>
+</tr>
+<tr valign="top">
+<td colspan=2>Both options are using '''HD''' resolution and have all the '''HD''' controls and features. Both <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;SD&#160;</span> and <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;HD&#160;</span> can be used in the same baseboard</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<table width=500>
+<tr valign="top">
+<td colspan=2>The setting can be switched during editing without affecting or altering the existing terrain. For example:-</td>
+</tr>
+<tr valign="top">
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>you can start editing the terrain using the '''HD Mode''' to give you the highest level of precision in one area of a baseboard</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>then switch to '''SD Mode''' to work in another area of the same (or a different) baseboard at a lower level of precision - which would be faster than using the '''HD Mode'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>then switch back to '''HD Mode''' to continue working in the same, or another, high precision area</td>
+</tr>
+</table>
+</td>
+<td>
+<table width=500 bgcolor=#000000>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To switch between '''HD''' and '''SD''' modes at any time:-</td>
+</tr>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the '''Main Menu''' [[image:EditMenu_S20.png|link=]]&#160;'''Edit Menu''' and select the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit&#160;Route...&#160;</span> option.<br><br>
+The keyboard shortcut is <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span></td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint2.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on either the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;SD&#160;</span> or the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;HD&#160;</span> button</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint3.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the [[image:Tick.PNG|link=|alt=Tick]] icon to make the switch</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+<td>[[image:EditMenuOptions_S20.png|link=]]</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 496: / Line 692: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>Each baseboard will be made up of '''10m x 10m''' (32.8ft x 32.8ft), '''5m x 5m''' (16.4ft x 16.4ft) or '''0.125m x 0.125m''' (4.9in x 4.9in) grid squares depending on the grid size setting used. The smallest grid size (0.125m x 0.125m) is '''HD''' (High Definition) and is only available in '''Trainz Plus''' when using '''Surveyor 2.0'''</td>
+<td>Each baseboard will be made up of:-
+<table>
+<tr valign="top">
+<td width=10>[[image:RedDot10x10.png|link=]]</td>
+<td>'''10m x 10m''' (32.8ft x 32.8ft) grid squares. This is referred to as '''10m Grid''' and is the default setting for new baseboards created using '''TRS19''' and '''TRS22'''</td>
+</tr>
+<tr valign="top">
+<td>&#160;</td>
+<td><span style="font-weight: 700; font-size: 15px;">OR</span></td>
+</tr>
+<tr valign="top">
+<td>[[image:RedDot10x10.png|link=]]</td>
+<td>'''5m x 5m''' (16.4ft x 16.4ft) grid squares. This is referred to as '''5m Grid'''</td>
+</tr>
+<tr valign="top">
+<td>&#160;</td>
+<td><span style="font-weight: 700; font-size: 15px;">OR</span></td>
+</tr>
+<tr valign="top">
+<td>[[image:RedDot10x10.png|link=]]</td>
+<td>'''0.125m x 0.125m''' (4.9in x 4.9in) grid squares which are invisible on the screen. This is referred to as '''HD Grid''' and is <span style="background-color: yellow;">only available in '''Trainz Plus'''</span>. It is also the default setting for new baseboards created using '''Trainz Plus'''</td>
+</tr>
+</table>
+</td>
 </tr>
 <tr valign="top">
@@ Line 504: / Line 723: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>The '''Geographic region''' will also decide if the baseboard is covered in a grass (or other) texture or the grid pattern as shown</td>
+<td>The baseboard will be covered with a texture, such as grass or a grid pattern.<br>
+This is set by the '''Geographic region''' and the selection made in the '''Ground''' option from the [[image:SurveyorDisplayIcon.png|link=]] '''Surveyor Display Menu''' - see '''[[image:PageLink.PNG|link=]]&#160;[[#skipDefaultGroundTexture|Default Baseboard Ground Texture]]''' below</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
 <br>
 ===<span style="color: black; background-color: lightcyan;">&#160;In Surveyor Classic (S10)&#160;</span>===
+<table width=1000>
+<tr valign="top">
+<td>'''Surveyor Classic''' or '''S10''' is the version of Surveyor found in '''TRS19''', '''TRS19PE''' and '''TRS22'''. It is one of two versions of Surveyor available in '''TRS22PE''' and '''Trainz Plus'''.<br>
 In '''Surveyor Classic''' the baseboards are controlled using the '''Topology Tools'''. To open the tools fly-out either <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> the '''Topology Tool Tab''' or press the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;F1&#160;</span> key.<br>
 [[image:Route Baseboard Tools.png|link=|alt=Topology Tools]]
@@ Line 515: / Line 743: @@
 </tr>
 </table>
+<br>
 <table width=1000>
 <tr valign="top">
@@ Line 531: / Line 759: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td><span style="font-weight: 700; font-size: 15px;">Grid Size</span> - a pop-out menu will give you a choice of '''10m''' (the default) or '''5m'''. The option for the '''HD Grid''' is only available in '''Surveyor 2.0''' in '''Trainz Plus'''. This sets the '''resolution''' of the baseboard. It does not alter the size of the grid squares which is actually a painted '''texture''' and will always stay at 10m x 10m.
+<td><span style="font-weight: 700; font-size: 15px;">Grid Size</span> - a pop-out menu will give you a choice of '''10m''' (the default) or '''5m'''. The option for the '''HD Grid''' is <span style="background-color: yellow;">only available in '''Trainz Plus'''</span>. This sets the '''resolution''' of the baseboard. It does not alter the size of the grid squares which is actually a painted '''texture''' and will always stay at 10m x 10m.
 <table>
 <tr valign="top">
@@ Line 539: / Line 767: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>With a 5m grid that resolution becomes 5m x 5m, so 4 different height values can be set in each 10m grid. This allows you to create <span style="font-weight: 700; background-color: yellow;">&#160;more accurate topology features&#160;</span> such as railway cuttings and embankments but it has a penalty, <span style="font-weight: 700; background-color: yellow;">&#160;significantly larger route map files&#160;</span></td>
+<td>With a 5m grid that resolution becomes 5m x 5m, so 4 different height values can be set in each 10m grid. This allows you to create more accurate topology features such as railway cuttings and embankments but it has a penalty, <span style="font-weight: 700; background-color: yellow;">&#160;significantly larger route map files&#160;</span></td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>With a HD grid ('''Trainz Plus''' only) the smallest area ('''resolution''') in which you can set a height is 0.125m x 0.125m</td>
+<td>With a HD grid (<span style="background-color: yellow;">in '''Trainz Plus''' only</span>) the smallest area ('''resolution''') in which you can set a height is 0.125m x 0.125m. This allows you to create even more accurate topology features but it has a penalty, <span style="font-weight: 700; background-color: yellow;">&#160;enormously larger route map files&#160;</span> - on average '''5x''' or more larger than 10m grid map files</td>
 </tr>
 <tr valign="top">
@@ Line 559: / Line 787: @@
 </table>
 <br>
+<span id="BaseboardS20"></span>
 ===<span style="color: white; background-color: blue;">&#160;In Surveyor 2.0 (S20)&#160;</span>===
-In '''Surveyor 2.0''' there is no separate '''Topology Tools''' fly-out. A single '''Tools Palette''' replaces all the separate tools "fly-outs" found in the original '''Surveyor Classic'''.<br>
+<table width=1000>
+<tr valign="top">
+<td>'''Surveyor 2.0''' or '''S20''' is an alternative version of Surveyor found in '''TRS22PE''' and '''Trainz Plus'''. '''Surveyor Classic''' is also available as an option in both '''TRS22PE''' and '''Trainz Plus'''.<br>
+In '''Surveyor 2.0''' there is no separate '''Topology Tools''' fly-out. A single '''Tools Palette''' replaces all the separate tools "fly-outs" found in the original '''Surveyor Classic'''.</td>
+</tr>
+</table>
+<br>
 <table width=1000>
 <tr valign="top">
@@ Line 622: / Line 857: @@
 <tr valign="top">
 <td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Convert Baseboards to&#160;</span></td>
-<td>a pop-out menu will give the options, '''10m Grid''', or '''5m Grid''' or (for '''Trainz Plus''' only) '''HD Grid'''. Selecting one of the options will create the new baseboards in the selected '''resolution'''. This tool is also used to convert existing baseboards from one resolution to the other.
+<td>a pop-out menu will give the options, '''10m Grid''', or '''5m Grid''' or (for <span style="background-color: yellow;">'''Trainz Plus''' only</span>) '''HD Grid'''. Selecting one of the options will create the new baseboards in the selected '''resolution'''. This tool is also used to convert existing baseboards from one resolution to the other.
 <table>
 <tr valign="top">
@@ Line 638: / Line 873: @@
 </td>
 </tr>
-<tr>
+<tr valign="top">
 <td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Delete Baseboards in Marquee&#160;</span></td>
 <td>to delete the selected baseboards. The '''Undo''' command <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;Z&#160;</span></span> will restore the deleted baseboards</td>
@@ Line 944: / Line 1,179: @@
 <table width=1000>
 <tr valign="top">
-<td>When you create a new route (with or without a named session), or load an existing route without a session, and start adding scenery assets they will automatically be placed into a '''Route Layer'''. See '''[[image:WikiLink.PNG|link=]]&#160;[[How_to_Use_Layers|How to Use Layers]]''' for more details.<br><br>
+<td>When you create a new route, or load an existing route without a session, and start adding scenery assets they will automatically be placed into a '''Route Layer'''. See '''[[image:WikiLink.PNG|link=]]&#160;[[How_to_Use_Layers|How to Use Layers]]''' for more details.<br><br>
-Any ground textures, water, effect layers (turfFX and clutter) you add, or terrain changes (including new baseboards) you make, will be added to the '''Route Data'''.</td>
+Any ground textures, effect layers (e.g. TurfFX, Water, Clutter) you add, or terrain changes (including new baseboards) you make, will be added to the '''Route Data'''.</td>
 </tr>
 </table>
@@ Line 974: / Line 1,209: @@
 <tr valign="top">
 <td>
-<table bgcolor=#000000 width=350 cellpadding=2>
+<table width=520 bgcolor=#000000 cellpadding=2>
 <tr valign="top">
 <td>
@@ Line 980: / Line 1,215: @@
 <tr valign="top">
 <td width=25>[[image:NotePad.PNG|link=]]</td>
-<td>You can edit the '''Route Characteristics''' at any time by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Route...&#160;</span> option from the '''Edit Menu''' or simply pressing <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span>.<br>
+<td>You can edit the '''Route Characteristics''' at any time by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit&#160;Route...&#160;</span> option from the [[image:EditMenu_S20.png|link=]]&#160;'''Edit Menu''' <span style="font-weight: 700; font-size: 15px;">OR</span> simply by pressing the <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span> keys.<br>
 This will bring up the '''Edit Route''' dialogue window (shown below).</td>
 </tr>
@@ Line 988: / Line 1,223: @@
 </table>
 </td>
-<td width=170>[[image:RouteEdit.png|link=|alt=Route edit]]</td>
 <td>
-<table bgcolor=#000000 width=480>
+<table width=480 bgcolor=#000000>
 <tr valign="top">
 <td>
-<table cellpadding=2 bgcolor=#ffffb0 width=476>
+<table width=476 cellpadding=2 bgcolor=#ffffb0>
 <tr valign="top">
 <td>[[image:NotePad.PNG|link=]]</td>
@@ Line 1,031: / Line 1,265: @@
 <table width=1000>
 <tr valign="top">
-<td width=650>[[image:RouteEditDialogue.png|link=|alt=Edit Route dialogue window]]</td>
+<td width=500>[[image:RouteEditWindowExample2_S20.png|link=]]</td>
 <td>
-<table>
+<table width=500>
 <tr valign="top">
 <td>[[image:DotPoint1.JPG|link=]]</td>
-<td>You can edit the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route name&#160;</span>. This will change the route '''username''' in the '''config.txt''' file but it will not alter the route '''&lt;kuid&gt;''' value</td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route name&#160;</span>. Editing this will change the route '''username''' in the '''config.txt''' file but it will not alter the route '''&lt;kuid&gt;''' value</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint2.JPG|link=]]</td>
-<td>You can select a new <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Region&#160;</span>. Depending on the region (the '''Geographic region''') selected this could affect other features such as the moving road traffic, season of the year (through the latitude tag) and altitude</td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Region&#160;</span>. Changing the region (the '''Geographic region''') selected could affect other features such as the moving road traffic, season of the year (through the latitude tag) and altitude</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint3.JPG|link=]]</td>
-<td>You can edit the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route description&#160;</span></td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route description&#160;</span>. Edit to include additional information or describe changes that have been made</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint4.JPG|link=]]</td>
-<td>You can change the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route thumbnail&#160;</span>. <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Set Thumbnail&#160;</span> button to take a snapshot using the current camera view which will be used as the new thumbnail</td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route thumbnail&#160;</span>. <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Set Thumbnail&#160;</span> button to take a snapshot using the current camera view which will be used as the new thumbnail. The image shown in the example on the left has been edited.</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint5.JPG|link=]]</td>
-<td>You can change the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working scale&#160;</span> which will only affect the measurement shown in the '''Surveyor Ruler''' tool</td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working scale&#160;</span>. Changing this will only affect the measurement shown in the '''Surveyor Ruler''' tool</td>
 </tr>
 <tr valign="top">
 <td>[[image:DotPoint6.JPG|link=]]</td>
-<td>You can change the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working units&#160;</span> to <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Metric&#160;</span> or <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Imperial&#160;</span> which will change the display of measurements using the Surveyor '''Ruler''' (to metres or yards) and how train speeds are calculated and displayed in Driver (in km/h or mph)</td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Working units&#160;</span>. Switching between '''Metric''' and '''Imperial''' will change how train speeds are calculated and displayed in Driver (in km/h or mph) and the units used by track speed signs</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint7.JPG|link=]]</td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Route Edit Detail&#160;</span> <span style="background-color: yellow;">in '''Trainz Plus''' only</span>. This sets the minimum ground brush size when working with '''HD Grid'''. It can be swapped between the two settings at anytime when editing. See <span style="font-weight: 700; font-size: 15px; color: white; background-color: blue;">&#160;SD/HD Options&#160;</span> below for more details</td>
 </tr>
 </table>
@@ Line 1,065: / Line 1,303: @@
 <table>
 <tr valign="top">
-<td>[[image:DotPoint7.JPG|link=]]</td>
+<td>[[image:DotPoint8.JPG|link=]]</td>
-<td>You can set or disable the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Draw distance cap&#160;</span> which will affect how far away from the camera that scenery objects will be drawn. A high setting, particularly the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Disabled&#160;</span> option (which means no draw distance cap), could affect the game performance, including the '''fps''' rate (frames per second), on some systems</td>
+<td><span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Draw distance cap&#160;</span> will affect how far away from the camera that scenery objects will be drawn. A high setting, particularly the <span style="color: white; background-color: black; font-weight: 700; font-size: 15px;">&#160;Disabled&#160;</span> option (which means no draw distance cap), could affect the game performance, including the '''fps''' rate (frames per second), on some systems</td>
 </tr>
 <tr valign="top">
-<td>[[image:DotPoint8.JPG|link=]]</td>
+<td>[[image:DotPoint9.JPG|link=]]</td>
 <td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the [[image:Tick.PNG|link=|alt=Tick]] icon to save the entered values and exit back to Surveyor. <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">Left Click</span> on the [[image:Cross.PNG|link=|alt=Tick]] icon to cancel any entered values and exit back to Surveyor</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table width=1000>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: blue;">&#160;SD/HD Options&#160;</span></td>
+</tr>
+<tr valign="top">
+<td>[[image:RouteEditDetailHD_S20.png‎|link=]]</td>
+</tr>
+</table>
+<br>
+<table width=1000>
+<tr valign="top">
+<td>The '''Surveyor Route Editor''' will allow you to switch between two minimum brush sizes when working with '''HD Grid''' routes.</td>
+</tr>
+<tr valign="top">
+<td>This option, <span style="background-color: yellow;">available in '''Trainz Plus''' only</span>, allows you to set the brush detail to the default '''HD''' (High Definition) or to a lower '''SD''' (Standard Definition) which is easier to work with over larger areas.
+<br>
+<table>
+<tr valign="top">
+<td>
+<table width=500 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2>The distinction between these two options is:-</td>
+</tr>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;HD&#160;</span></td>
+<td>This is the full '''HD Mode''' where the minimum brush size is '''0.12m''' (12cm). This is the default selection</td>
+</tr>
+<tr valign="top">
+<td><span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;SD&#160;</span></td>
+<td>This is a reduced '''HD Mode''' where the minimum brush size is '''2m'''</td>
+</tr>
+<tr valign="top">
+<td colspan=2>Both modes:-
+<table>
+<tr valign="top">
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>have all the normal '''HD''' controls and features</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>will work anywhere within the grid squares of a '''HD Grid''' route and are not restricted to the grid lines or intersections</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>can be used in different areas of the same baseboard</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<table width=500>
+<tr valign="top">
+<td colspan=2>The setting can be switched during editing without affecting or altering the existing terrain. For example:-</td>
+</tr>
+<tr valign="top">
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>you can start editing the terrain using the '''HD Mode''' to give you the highest level of precision in one area of a baseboard</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>then switch to '''SD Mode''' to work in another area of the same (or a different) baseboard at a lower level of precision - which would be faster than using the '''HD Mode'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>then switch back to '''HD Mode''' to continue working in the same, or another, high precision area</td>
+</tr>
+</table>
+</td>
+<td>
+<table width=500 bgcolor=#000000>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To switch between '''HD''' and '''SD''' modes at any time:-</td>
+</tr>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td>
+<table>
+<tr valign="top">
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the '''Main Menu''' [[image:EditMenu_S20.png|link=]]&#160;'''Edit Menu''' and select the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit&#160;Route...&#160;</span> option<br>
+'''Shortcut:''' Press <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span></td>
+</tr>
+<tr valign="top">
+<td colspan=2>This will open the '''Route Editor''' dialogue window which, <span style="background-color: yellow;">in '''Trainz Plus''' only</span>, has an additional control, the '''Route Edit Detail'''</td>
+</tr>
+<tr valign="top">
+<td colspan=2>[[image:RouteEditDetailHD_S20.png‎|link=]]</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint2.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on either the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;SD&#160;</span> or the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;HD&#160;</span> button</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint3.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the [[image:Tick.PNG|link=|alt=Tick]] icon at the bottom right of the dialogue window to make the switch</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+<td>[[image:EditMenuOptions_S20.png|link=]]</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffb0 cellpadding=2>
+<tr valign="top">
+<td width=25>[[image:NotePad.PNG|link=]]</td>
+<td>When using <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;SD&#160;</span> mode brush sizes less than '''2m''' will be ignored and a '''2m''' brush size will be used instead. Larger brush sizes can be set and used</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 1,094: / Line 1,470: @@
 <tr valign="top">
 <td width=350>
-You can edit the '''Environment Controls''' of a Route by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Environment...&#160;</span> option from the '''Edit Menu'''.<br>
+You can edit the '''Environment Controls''' of a Route by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Environment...&#160;</span> option from the [[image:EditMenu_S20.png|link=]]&#160;'''Edit Menu'''.<br>
 This will bring up the '''Edit Environment''' dialogue window, more commonly called the '''Environment Tools'''.<br>
 For more details on editing the '''Environment''' see the '''Trainz Wiki Page''' at '''[[image:WikiLink.PNG|link=]]&#160;[[How_to_Use_Environment_Tools|The Environment Tools]]'''</td>
@@ Line 1,211: / Line 1,587: @@
 </tr>
 <tr valign="top">
-<td colspan=2>You can have multiple effect layers of each type in a route.</td>
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>'''Color''' - a transparent "skin" that covers the ground texture throughout the entire route. Different parts of this layer can be given different colors or "tints" to alter the appearance of the texture below. This is only available for <span style="font-weight: 700; background-color: yellow;">&#160;Trainz Plus subscribers when using HD terrain&#160;</span></td>
+</tr>
+<tr valign="top">
+<td colspan=2>You can have multiple effect layers of each type (except the color layer) in a route.</td>
 </tr>
 </table>
@@ Line 1,249: / Line 1,629: @@
 </table>
 <br>
 =='''Merging Routes'''==
 <table width=1000 bgcolor="lightcyan" cellpadding=2>
@@ Line 1,321: / Line 1,702: @@
 </td>
 </tr>
+</table>
+<table width=700>
+<tr valign="top">
+<td>
+<table width=300>
 <tr valign="top">
 <td width=25>[[image:Ablue.png|link=]]</td>
@@ Line 1,330: / Line 1,717: @@
 </tr>
 </table>
-<br>
+</td>
-<table width=1000 bgcolor="lightcyan" cellpadding=2>
+<td>
+<table width=400 bgcolor=#000000 cellpadding=2>
 <tr valign="top">
-<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>
-<td>When you save a Session, all the items in the '''Session Data''' and '''Session Layers''' will be saved</td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td>'''When you save a Session, all items in the Session Data and Session Layers will be saved'''</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 1,414: / Line 1,810: @@
 <table bgcolor=#ffffff cellpadding=2>
 <tr valign="top">
-<td>'''Session Layers''' can contain:-</td>
+<td>'''Session Layers''' can contain any assets that will be unique to that Session:-</td>
 </tr>
 <tr valign="top">
@@ Line 1,446: / Line 1,842: @@
 <tr valign="top">
 <td>[[image:PencilTips.PNG|link=]]</td>
-<td>While it is possible to add '''track''' and '''track objects''' (bridges, tunnels, turntables, signals, switches, etc) to '''Session Layers''' it is '''not recommended'''. These fixed assets should be placed into '''Route Layers'''.<br><br>
+<td>While it is possible to add '''track''' and '''track objects''' (bridges, tunnels, turntables, signals, switches, etc) to '''Session Layers''' it is '''NOT RECOMMENDED'''. These assets should always be placed into '''Route Layers''' and, preferably, into the '''route-layer''' itself.</td>
-However, it is common to place invisible AI control objects such as '''Trackmarks''', '''Triggers''', '''Direction Markers''' and '''Priority Markers''' in a '''Session Layer'''
-</td>
 </tr>
 </table>
@@ Line 1,528: / Line 1,921: @@
 <tr valign="top">
 <td width=10>[[image:BlueDot10x10.png|link=]]</td>
-<td>To create a new Session you must first create a new Route or identify an existing Route</td>
+<td>To create a new Session you must first create a new Route or load an existing Route</td>
 </tr>
 </table>
-A new session can be created in two ways:-<br>
+<br>
+<table bgcolor=#000000 cellpadding=2>
-<table bgcolor=#0000ff cellpadding=2>
 <tr valign="top">
 <td>
-<table bgcolor=#ffffff cellpadding=2>
+<table bgcolor=#ffffb0 cellpadding=2>
 <tr valign="top">
-<td colspan=2>[[image:Ablue.png|link=]] <span style="font-size: 17px; font-weight:700; color: white; background-color: black">&#160;Automatically When a New Route is Created&#160;</span></td>
+<td>[[image:NotePad.PNG|link=]]</td>
-</tr>
+<td>A route can have many individual sessions so a new session can be added to a route that already has sessions</td>
-<tr valign="top">
-<td width=390>[[image:RouteSARWindow.png|link=|alt=Route Details]]</td>
-<td>
-<br>
-Follow the steps shown in the section '''[[image:PageLink.PNG|link=]]&#160;[[#Creating a New Route|Creating a New Route]]''' above.
-<table>
-<tr valign="top">
-<td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To create a new route and session enter or select:-</td>
-</tr>
-<tr valign="top">
-<td width=25>[[image:DotPoint1.JPG|link=]]</td>
-<td>a '''Route name''' for the new route</td>
-</tr>
-<tr valign="top">
-<td>[[image:DotPoint2.JPG|link=]]</td>
-<td>a '''Session name''' for the new session <span style="background-color: yellow;"><span style="font-weight: 700;">&#160;Note:&#160;</span> This step <u>'''IS'''</u> important </span></td>
-</tr>
-<tr valign="top">
-<td colspan=2>The following steps are optional, but are '''recommended'''</td>
-</tr>
-<tr valign="top">
-<td>[[image:DotPoint4.JPG|link=]]</td>
-<td>a '''Geographical region'''</td>
-</tr>
-<tr valign="top">
-<td>[[image:DotPoint5.JPG|link=]]</td>
-<td>'''Working scale''' and '''Working units'''</td>
-</tr>
-</table>
-</td>
 </tr>
 </table>
@@ Line 1,576: / Line 1,938: @@
 </table>
 <br>
-<table width=1000>
+<table width=1000 bgcolor=#000000 cellpadding=2>
-<tr valign="top">
-<td align="center"><span style="font-weight: 700; font-size: 17px;">OR</span></td>
-</tr>
-</table>
-<br>
-<table bgcolor=#0000ff cellpadding=2>
 <tr valign="top">
 <td>
-<table bgcolor=#ffffff cellpadding=2>
+<table width=996 bgcolor=#ffffff cellpadding=2>
-<tr valign="top">
-<td colspan=2>[[image:Bblue.png|link=]] <span style="font-size: 17px; font-weight:700; color: white; background-color: black;">&#160;Adding a Session to an Existing Route&#160;</span></td>
-</tr>
-<tr valign="top">
-<td colspan=2>
-<table bgcolor=#ffffb0 cellpadding=2>
-<tr valign="top">
-<td>[[image:NotePad.PNG|link=]]</td>
-<td>A route can have many individual sessions so a new session can be added to a route that already has sessions</td>
-</tr>
-</table>
-</td>
-</tr>
 <tr valign="top">
 <td colspan=2><span style="font-weight: 700; font-size: 15px;">Steps:</span> To add a new session to an existing route:-</td>
@@ Line 1,620: / Line 1,963: @@
 </table>
 </td>
-</tr>
-</table>
-<br>
-<table width=1000 cellpadding=2>
-<tr valign="top">
-<td>Both [[image:Ablue.png|link=]] and [[image:Bblue.png|link=]] will load or create the route in '''Surveyor''' and create a new session with all its values/parameters set at the '''default''' levels.</td>
 </tr>
 </table>
@@ Line 1,706: / Line 2,043: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>can be loaded directly into '''Driver''' from '''Content Manager'''. See [[image:PageLink.PNG|link=]] '''[[#Loading a Session Into Surveyor From Content Manager|Loading a Session Into Surveyor From Content Manager]]''' below.</td>
+<td>can be loaded directly into '''Surveyor''' from '''Content Manager'''. See [[image:PageLink.PNG|link=]] '''[[#Loading a Session Into Surveyor From Content Manager|Loading a Session Into Surveyor From Content Manager]]''' below.</td>
 </tr>
 <tr valign="top">
@@ Line 2,008: / Line 2,345: @@
 <td width=350>
 ----
-You can edit the '''Session Characteristics''' at any time by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Session...&#160;</span> option from the '''Edit Menu''' or by simply pressing <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;R&#160;</span></span>.<br>
+You can edit the '''Session Characteristics''' at any time by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Session...&#160;</span> option from the [[image:EditMenu_S20.png|link=]]&#160;'''Edit Menu''' or by simply pressing <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;R&#160;</span></span>.<br>
 This will bring up the '''Edit Session''' dialogue window which is more commonly called the '''Session Editor''' (shown below).<br>
 For more details on editing a Session see the '''Trainz Wiki Page''' at '''[[image:WikiLink.PNG|link=]]&#160;[[How_to_Use_Session_Editor|The Session Editor]]''' - screenshot shown below.</td>
@@ Line 2,106: / Line 2,443: @@
 <tr valign="top">
 <td width=350>
-You can edit the '''Environment Controls''' of a Session by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Environment...&#160;</span> option from the '''Edit Menu'''.<br>
+You can edit the '''Environment Controls''' of a Session by selecting the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Environment...&#160;</span> option from the [[image:EditMenu_S20.png|link=]]&#160;'''Edit Menu'''.<br>
 This will bring up the '''Edit Environment''' dialogue window, more commonly called the '''Environment Tools'''.<br>
 For more details on editing the '''Environment''' see the '''Trainz Wiki Page''' at '''[[image:WikiLink.PNG|link=]]&#160;[[How_to_Use_Environment_Tools|The Environment Tools]]'''</td>
@@ Line 2,223: / Line 2,560: @@
 <tr valign="top">
 <td>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>can be loaded directly into '''Driver''' from '''Content Manager'''. See [[image:PageLink.PNG|link=]] '''[[#Loading a Route Into Surveyor From Content Manager|Loading a Route Into Surveyor From Content Manager]]''' and [[image:PageLink.PNG|link=]] '''[[#Loading a Session Into Surveyor From Content Manager|Loading a Session Into Surveyor From Content Manager]]''' below.</td>
+<td>can be loaded directly into '''Surveyor''' from '''Content Manager'''. See [[image:PageLink.PNG|link=]] '''[[#Loading a Route Into Surveyor From Content Manager|Loading a Route Into Surveyor From Content Manager]]''' and [[image:PageLink.PNG|link=]] '''[[#Loading a Session Into Surveyor From Content Manager|Loading a Session Into Surveyor From Content Manager]]''' below.</td>
 </tr>
 <tr valign="top">
@@ Line 2,527: / Line 2,864: @@
 =='''Saving an Existing Route and Session'''==
 </td>
-<td width=50>[[image:SkipDown.png|link=#skipSaveUDS|Skip Down]]</td>
+<td width=50>[[image:SkipDown.png|link=#skipSaveExistingSessionOnly|Skip Down]]</td>
 <td width=50>[[image:SkipUp.png|link=#skipSaveExistingRoute|Skip Up]]</td>
 <td width=46>&#160;</td>
@@ Line 2,554: / Line 2,891: @@
 <td>[[image:Gears.PNG|link=]]</td>
 <td><span style="font-size: 17px; font-weight: 700;">Settings:'''</span><br>
-<span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Option&#160;</span> [[image:Ablue.png|link=]]&#160;'''Overwrite Route and Session</span>. This is the '''default''' selection so there is nothing to change.
+<span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Option&#160;</span> [[image:Ablue.png|link=]]&#160;Overwrite Route and Session</span>. This is the '''default''' selection so there is nothing to change.
 :[[image:White_Select_Dot.png|link=]]&#160;'''Overwrite existing route and:'''
 ::[[image:White_Select_Dot.png|link=]]&#160;'''Overwrite existing session:'''
@@ Line 2,609: / Line 2,946: @@
 </table>
 </td>
+</tr>
+</table>
+<br>
+<table width=1000>						<!-- BEGIN Nav Buttons Table -->
+<tr valign="top">
+<td width=629><span id="skipSaveExistingSessionOnly"></span>
+=='''Saving an Edited Session Only'''==
+</td>
+<td width=50>[[image:SkipDown.png|link=#skipSaveUDS|Skip Down]]</td>
+<td width=50>[[image:SkipUp.png|link=#skipSaveExistingRouteSession|Skip Up]]</td>
+<td width=46>&#160;</td>
+<td width=75>&#160;</td>
+<td width=75>&#160;</td>
+<td width=75>&#160;</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
+<table width=1000 bgcolor="lightcyan" cellpadding=2>
+<tr valign="top">
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>If you have only edited the session then you will be given the option to save the '''Session''' only</td>
 </tr>
 </table>
@@ Line 2,659: / Line 3,017: @@
 </td>
 <td width=50>[[image:SkipDown.png|link=#stepExit|Skip Down]]</td>
-<td width=50>[[image:SkipUp.png|link=#skipSaveExistingRouteSession|Skip Up]]</td>
+<td width=50>[[image:SkipUp.png|link=#skipSaveExistingSessionOnly|Skip Up]]</td>
 <td width=46>&#160;</td>
 <td width=75>&#160;</td>
@@ Line 3,408: / Line 3,766: @@
 <tr valign="top">
 <td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
-<td>to rename a route open the '''Edit''' menu and select '''Edit Route''', or press <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span> - see [[image:PageLink.PNG|link=]]&#160;'''[[#Editing a Route|Editing a Route]]''' above</td>
+<td>to rename a route open the [[image:EditMenu_S20.png|link=]]&#160;'''Edit''' menu and select the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit&#160;Route...&#160;</span> option, <span style="font-weight: 700; font-size: 15px;">OR</span> press <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;E&#160;</span></span> - see [[image:PageLink.PNG|link=]]&#160;'''[[#Editing a Route|Editing a Route]]''' above</td>
 </tr>
 <tr valign="top">
@@ Line 3,680: / Line 4,038: @@
 <tr valign="top">
 <td width=10>[[image:BlueDot10x10.png|link=]]</td>
-<td>'''Deleting a Session will delete that Session and its Driver Games (if any), not the Route it was created from or any other Sessions'''</td>
+<td>'''Deleting a Route will delete that Route, all its Sessions and all its Driver Games (if any)'''</td>
 </tr>
 <tr valign="top">
 <td>[[image:BlueDot10x10.png|link=]]</td>
-<td>'''Deleting a Driver Game will only delete that Driver Game, not the Route or Session it was created from or any other Driver Games'''</td>
+<td>'''Deleting a Session will delete that Session and its Driver Games (if any). It will NOT delete the Route it was created from. It will NOT delete other Sessions created for that Route. It will NOT delete any other Driver Games created for those other Sessions'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>'''Deleting a Driver Game will only delete that Driver Game. It will NOT delete the Route or Session it was created from or any other Driver Games from that Session'''</td>
 </tr>
 </table>
@@ Line 3,740: / Line 4,102: @@
 ----
 ----
 ='''Trainz Wiki'''=
 <table width=1000 cellpadding=2>
@@ Line 3,749: / Line 4,112: @@
 <td>
 <span style="font-size: 17px;">'''Route and Session Building Guides'''</span><br>
-*'''<span class="plainlinks">[http://online.ts2009.com/mediaWiki/index.php/HowTo How to Guides]</span>'''
+*'''<span class="plain;s">[http://online.ts2009.com/mediaWiki/index.php/HowTo How to Guides]</span>'''
 *'''[[HowTo/Create_a_Route_in_10_Minutes|Create a Route in 10 Minutes]]'''
 *'''[[How_to_Make_Good_Scenery|How to Make Good Scenery]]'''
@@ Line 3,759: / Line 4,122: @@
 <td>
 <span style="font-size: 17px;">'''More Tutorials and Guides to Using Trainz'''</span><br>
-*'''<span class="plainlinks">[http://online.ts2009.com/mediaWiki/index.php/HowTo How to Guides]</span>'''
+*'''<span class="plain;s">[http://online.ts2009.com/mediaWiki/index.php/HowTo How to Guides]</span>'''
 *'''[[Driver Commands List]]'''
 *'''[[Session Rule List with Parameters|Session Rules List (Alphabetical) with Parameters]]'''
@@ Line 3,785: / Line 4,148: @@
 </table>
 ----
-This page was created by Trainz user '''<span class="plainlinks">[http://online.ts2009.com/mediaWiki/index.php/User:Pware pware]</span>''' in September 2021 and was last updated as shown below.
+This page was created by Trainz user '''<span class="plain;s">[http://online.ts2009.com/mediaWiki/index.php/User:Pware pware]</span>''' in September 2021 and was last updated as shown below.
 ----
 [[Category:How-to guides]]

Route and Session Basics

Latest revision as of 17:22, 30 October 2024

Contents

[edit] Trainz Worlds

[edit] What is a Route?

[edit] Loading (and Creating) a Route

[edit] Creating a New Route

[edit] The Surveyor World View

[edit] In Surveyor Classic (S10)

[edit] In Surveyor 2.0 (S20)

[edit] Default Baseboard Ground Texture

[edit] Loading an Existing Route

[edit] Loading a Route Into Surveyor From Content Manager

[edit] Loading After an Unexpected Shutdown

[edit] Editing a Route

[edit] Editing the Environment of a Route

[edit] Edit Effect Layers

[edit] Merging Routes

[edit] What is a Session?

[edit] Loading (and Creating) a Session

[edit] Creating a New Session

[edit] Loading an Existing Session

[edit] Loading a Session Into Surveyor From Content Manager

[edit] Loading a Session into Driver From Surveyor

[edit] Loading a Session into Driver From Content Manager

[edit] Editing a Session

[edit] Editing the Environment of a Session

[edit] Saving a Route and a Session

[edit] Saving a New Route and Session

[edit] Saving an Existing Route

[edit] Saving an Existing Route and Session

[edit] Saving an Edited Session Only

[edit] Saving a Route and Session Using the UDS

[edit] Exiting Surveyor

[edit] Exiting Driver

[edit] Cloning a Route/Session

[edit] Cloning Using Surveyor

[edit] Cloning Using Content Manager

[edit] Saving and Loading Driver Games in Driver

[edit] Saving Driver Games

[edit] Loading Driver Games

[edit] Editing Driver Games

[edit] Deleting Routes and Sessions

[edit] Trainz Wiki

Views

Personal tools

Navigation

Search

Toolbox