SAR Scenario Terowie Shunter

From TrainzOnline
Revision as of 20:26, 28 February 2021 by Pware (Talk | contribs)

Jump to: navigation, search
 Terowie Shunter 
A scenario in the SAR Peterborough Base Session
Shunting operations in Terowie Yard. Bottom
Terowie Shunter
 Duration:  xx minutes
 Loco:  SAR T 198 at Terowie Depot

Other Unrostered Locos:

  • SAR T 231 at Terowie Depot

Location Index

Location Index		 Each location in the layout has a detailed set of track diagrams that provide a variety of information. The  Getting Started  guide below gives a summary of the information that is available.

To display the data click any Line Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Getting Started:
  1. The first step is to pause the session by pressing the P key.
  2. Next locate your loco. Either:-
    1. Open the Finder Tool (press CTRL-F) and type, in the name field, the name of the loco. For example SAR T 198 (or just T 198 should be enough). Click the tick icon, OR
    2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
  3. Take a few moments to get your bearings. Use the Location Index (this link will open in this window) and click on Terowie to load its location details and track plans. In each location details page:-
    • the Tab PH Grey.png tab will identify the EIT Paths that are available if you wish to use them.
    • the Tab TM Grey.png tab will reveal the invisible TM Track Marks for Drive To commands.
    • the Tab IN Grey.png tab will show all active industries and their commodities.
    • the Tab SW Grey.png tab will give you the names, locations and settings of all junction switches as well as some switch sets you may want to use.
  4. Each location page has direct links to the next locations so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to TRS19 Driver and press the P key to start the session.

 Yard Map: 		 Strip Map
Yard map

Terowie

 Tasks: 

  1. Move the loco out of the  Loco Depot  and run tender first past the  Station  to the  Goods Transfer  Sidings.
  2. Couple the loco to the rake of MTW flat wagons stored on the northern (Peterborough) end of  Goods Siding 2 .
  3. Take the MTW flat wagons to the  Goods Gantry  to be loaded.
  4. After loading take the wagons back to the  Goods Transfer  Sidings and store them on  Goods Siding 1 .
  5. Couple the loco to the rake of QLX wagons on  Goods Siding 2 .
  6. Take the QLX wagons to the  Goods Transfer  Shed and load.
  7. After loading move the wagons onto  Goods Siding 2 .
  8. The two rakes of loaded wagons on  Goods Siding 1  and  Goods Siding 2  must be split and recombined into two consists according to their destinations. The destinations, Peterborough and Gladstone, are shown in the name of each wagon. All the Gladstone wagons are to be placed into one consist and the Peterborough wagons into the other consist.
  9. Combine the two consists into one with the Peterborough wagons at the front (Peterborough) end the DB Guard Van at the rear of the Gladstone wagons.
  10. Move the combined consist onto the  Relief Yard  in the main Terowie Yard.
  11. Return the loco to its starting position in the  Loco  Depot.

Driving Notes:
  • You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.
Links: All links will open in this window
Scenarios
Session Scenarios List		 Location Index
Location List		 Rolling Stock
Rolling Stock		 Industries
Active Industries		 Top

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

Retrieved from "https://game.ts2009.com/mediaWiki/index.php?title=SAR_Scenario_Terowie_Shunter&oldid=28578"
Personal tools