CCG/Kind: Interior
From TrainzOnline
Contents |
KIND: INTERIOR
This is the traincar interior.
Referenced by the interior tag in a traincar config.txt
An interior config.txt file has the ability to be setup using a mesh-table. This gives greater control over animations and allows for script implementation.
In the following example, the generic UP DD40 interior has scripted, animated wipers and a fan, both controlled by a switches. Also, when these switches are in the 'on' position, a mesh is rendered to represent the switch light coming on.
The DD40 interior is a great example of what can be done using standard levers alone. The sliding windows, the retractable sun visors and the swivel chair are all 'levers'. Sure they contain no real function... It adds a bit of fun if anything!
Download DD40 Interior source and in-games files here: http://www.auran.com/TRS2004/downloads/contentcreation/TRS2004_dd40_interior.zip
DD40 Cab Interior
DD40 Interior Config.txt
kind "interior"
script "DD40Cabin"
class "DD40Cabin"
kuid <KUID:-3:10085>
cameralist
{
camera0 -0.564, 0.984, 0.987, 13.528, -0.137
camera1 0.707, -0.333, 1.023, -6.189, -0.049
camera2 1.317, 0.949, 1.023, -13.501, -0.122
camera3 -1.058, 0.522, 0.887, 0.1, -0.089
camera4 -1.382, 0.78, 0.987, 6.592, -0.194
camera5 -1.361, 0.923, 1.137, 6.902, -0.503
camera6 -0.618, 0.715, 1.023, -0.983, -0.234
}
cameradefault 3
mesh-table
{
default
{
mesh gen_dd40_int.im
auto-create 1
}
Fan_Switch
{
kind lever
auto-create 1
mesh switch_red.im
att a.switch0
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight0
{
kind light
mesh switchlight.pm
att a.switch0
auto-create 0
att-parent default
}
Wiper_Switch
{
kind lever
auto-create 1
mesh switch_red.im
att a.switch1
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight1
{
kind light
mesh switchlight.pm
att a.switch1
auto-create 0
att-parent default
}
Switch_3
{
kind lever
auto-create 1
mesh switch.pm
att a.switch2
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight2
{
kind light
mesh switchlight.pm
att a.switch2
auto-create 0
att-parent default
}
Switch_4
{
kind lever
auto-create 1
mesh switch.pm
att a.switch3
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight3
{
kind light
mesh switchlight.pm
att a.switch3
auto-create 0
att-parent default
}
Switch_5
{
kind lever
auto-create 1
mesh switch.pm
att a.switch4
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight4
{
kind light
mesh switchlight.pm
att a.switch4
auto-create 0
att-parent default
}
Switch_6
{
kind lever
auto-create 1
mesh switch.pm
att a.switch5
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight5
{
kind light
mesh switchlight.pm
att a.switch5
auto-create 0
att-parent default
}
Switch_7
{
kind lever
auto-create 1
mesh switch.pm
att a.switch6
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight6
{
kind light
mesh switchlight.pm
att a.switch6
auto-create 0
att-parent default
}
Switch_8
{
kind lever
auto-create 1
mesh switch.pm
att a.switch7
limits 0, 1
angles 0, -2
notches 0, 1
notchheight 0, 0
mousespeed -1
radius 0.05
att-parent default
}
switchlight7
{
kind light
mesh switchlight.pm
att a.switch7
auto-create 0
att-parent default
}
reverser_lever
{
kind lever
auto-create 1
mesh reverser_lever.pm
att a.reverser_lever
limits 0, 2
angles 0.55, -0.55
notches 0, 0.5, 1
notchheight 1, 1, 1
att-parent default
}
independantbrake_lever
{
kind lever
auto-create 1
mesh ind_brake_lever.pm
att a.ind_brake_lever
limits 0, 32
angles 0, -2.1
notches 0, 0.1, 0.2, 0.3, 0.4, 0.5, 0.6,0.7, 0.8, 0.9, 1
notchheight 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1
radius 0.15
att-parent default
}
trainbrake_lever
{
kind lever
auto-create 1
mesh train_brake_lever.pm
att a.train_brake_lever
limits 0, 4
angles 0, -2.4
notches 0, 0.25, 0.27, 0.29, 0.31, 0.33,0.35, 0.37, 0.39, 0.41, 0.43, 0.45, 0.47, 0.49,0.5, 0.75, 1
notchheight 1, 1, 2, 2, 2, 2, 2, 2, 2, 2,2, 2, 2, 2, 1, 1, 1
radius 0.15
att-parent default
}
throttle_lever
{
kind lever
auto-create 1
mesh throttle_lever.pm
att a.thottle_lever
limits 0, 8
angles 1.2, 0
notches 0, 0.125, 0.25, 0.375, 0.5, 0.625,0.75, 0.875, 1
notchheight 1, 2, 2, 2, 2, 2, 2, 2, 1
radius 0.35
att-parent default
}
dynamicbrake_lever
{
kind lever
auto-create 1
mesh dynamic_lever.pm
att a.dynamic_brake
limits 0, 2
angles 0, -1.2
notches 0, 0.5, 1
notchheight 1, 1, 1
radius 0.35
att-parent default
}
light_switch
{
kind lever
auto-create 1
att a.light_switch
mesh dial.pm
limits 0, 1
angles 0, 4.5
notches 0, 0.5, 1
notchheight 0, 0, 0
att-parent default
}
ampmeter_needle
{
kind needle
auto-create 1
att a.ammeter
limits 0, 1500
angles 0, 1.9
att-parent default
}
bploco_equaliser
{
kind needle
auto-create 1
mesh whitepress_needle.pm
att a.equaliser_pressure
limits 0, 1000
att-parent default
}
bplocomain_needle
{
kind needle
auto-create 1
mesh redpress_needle.pm
att a.main_res_pressure
limits 0, 1000
att-parent default
}
bptrainbrakecylinder_needle
{
kind needle
auto-create 1
mesh redpress_needle.pm
att a.brake_cyl_pressure
limits 0, 1000
att-parent default
}
bptrainbrakepipe_needle
{
kind needle
auto-create 1
mesh whitepress_needle.pm
att a.brake_pipe_pressure
limits 0, 1000
att-parent default
}
speedo_needle
{
kind needle
auto-create 1
mesh whitepress_needle.pm
att a.speedo
limits 0, 48
att-parent default
}
horn
{
kind lever
auto-create 1
mesh horn.pm
att a.horn
limits 0, 1
angles 0, -0.6
notches 0, 1
notchheight 3, 3
radius 0.16
mousespeed -2
att-parent default
}
wheelslip_light
{
kind light
auto-create 0
mesh wheelslip.pm
}
swivel_chair
{
kind lever
auto-create 1
mesh chair.im
att a.chair1
limits 0, 8
angles 6.8, -6.8
radius 0.5
mousespeed 0.2
att-parent default
}
dial0
{
kind lever
auto-create 1
att a.dial0
mesh dial.pm
limits 0, 1
angles 0, 3.8
notches 0, 1
notchheight 0, 0
att-parent default
}
dial1
{
kind lever
auto-create 1
att a.dial1
mesh dial.pm
limits 0, 1
angles 0, 3.8
notches 0, 1
notchheight 0, 0
att-parent default
}
fan
{
mesh fan.im
anim fan.kin
auto-create 1
att a.fan
att-parent default
}
visor0
{
mesh visor.im
auto-create 1
att a.visor0
att-parent default
kind lever
mousespeed -1
limits 0, 1
angles 0, 1.7
notches 0, 0.125, 0.25, 0.375, 0.5, 0.625, 0.75, 0.875, 1
notchheight 0, 0, 0, 0, 0, 0, 0, 0, 0
}
visor1
{
mesh visor.im
auto-create 1
att a.visor1
att-parent default
kind lever
mousespeed -1
limits 0, 1
notches 0, 0.125, 0.25, 0.375, 0.5, 0.625, 0.75, 0.875, 1
notchheight 0, 0, 0, 0, 0, 0, 0, 0, 0
}
sl_wind_R_Fr
{
mesh sliding_wind_R_Fr.im
auto-create 1
att a.sliding_wind_R_Fr
att-parent default
limits 0, 1.0
angles 0, 0.011
notches 0, 0.125, 0.25, 0.375, 0.5,0.625, 0.75, 0.875, 1
notchheight 0, 0, 0, 0, 0, 0, 0, 0, 0
kind lever
}
sl_wind_R_Bk
{
mesh sliding_wind_R_Bk.im
auto-create 1
att a.sliding_wind_R_Bk
att-parent default
limits 0, 1.0
angles 0, -0.011
notches 0, 0.125, 0.25, 0.375, 0.5, 0.625, 0.75, 0.875, 1
notchheight 0, 0, 0, 0, 0, 0, 0, 0, 0
mousespeed -1
kind lever
}
sl_wind_L_Fr
{
mesh sliding_wind_L_Fr.im
auto-create 1
att a.sliding_wind_L_Fr
att-parent default
limits 0, 1.0
angles 0, -0.011
notches 0, 0.125, 0.25, 0.375, 0.5, 0.625, 0.75, 0.875, 1
notchheight 0, 0, 0, 0, 0, 0, 0, 0, 0
kind lever
}
sl_wind_L_Bk.im
{
mesh sliding_wind_L_Bk.im
auto-create 1
att a.sliding_wind_L_Bk
att-parent default
limits 0, 1.0
angles 0, 0.011
notches 0, 0.125, 0.25, 0.375, 0.5,0.625, 0.75, 0.875, 1
notchheight 0, 0, 0, 0, 0, 0, 0, 0, 0
mousespeed -1
kind lever
}
wipers
{
mesh wipers.im
anim wipers.kin
auto-create 1
att a.wipers
att-parent default
}
}
End of DD40 interior config.txt
