SAR Scenario Paratoo Empty Ore

From TrainzOnline
Revision as of 09:09, 22 February 2021 by Pware (Talk | contribs)

Jump to: navigation, search

 Gladstone to Peterborough Empty Ore 
 Gladstone to Paratoo Empty Ore 

Moving empty ore wagons from Port Pirie to Broken Hill. Bottom
Empty Ore
Each location in the layout has a detailed set of track diagrams that provide the following information:-
  • the names of the tracks, sidings and loops
  • the location of various facilities - stations, turntables, water columns, coal stages, engine sheds, active industries
  • the names of active industries and their products and consumables
  • the names and locations of trackmarks for Drive To and Drive Via commands
  • the names, properties and locations of track switches and lists of switch sets for particular movements
  • Enhanced Interlocking Tower paths for those locations that have EITs
Location Index
To display the location data click the Location Index graphic here or in the text below, or go to the bottom of the page for all the session links (links will open in this window).
Duration: Gladstone to Peterborough 1 hour 20 minutes
Gladstone to Paratoo 2 hour 45 minutes
Loco: SAR T 201 at Gladstone Depot

Other Unrostered Locos:

  • SAR T 210 at Gladstone Depot
  • SAR T 23 on Peterborough Depot Siding 1
  • SAR T 233 on Peterborough Depot Loco Road 1
  • SAR 407 on Peterborough Depot Repair Shop Road 4
Consist: 22 CCC gondola wagons, 1 DB Guard Van on Gladstone Yard 1

Getting Started:

  1. The first step is to pause the session by pressing the P key.
  2. Next locate your loco. Either:-
    1. Open the Finder (press CTRL-F) and type, in the name field, the name of the loco. For example SAR T 201 (or just T 201 should be enough). Click the tick icon, OR
    2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
  3. Take a few moments to get your bearings. Use the Location Index (this link will open in this window) and click on Gladstone to load its location details and track plans. The Tab PH Grey.png tab will give you the EIT Paths that are available if you wish to use them. The Tab TM Grey.png tab will give you the location and names of the invisible Track Marks for Drive To commands. The Tab IN Grey.png tab will show the names and locations of all active industries and their commodities. The Tab SW Grey.png tab will give the names and locations of all junction switches as well as some switch sets you may want to use.
  4. Each location page has a direct link to the next location page, in all directions, so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to TRS19 Driver and press the P key to start the session.
Tasks:
  1. Run the loco light engined from the depot to couple to the train on Yard 1.
  2. Deliver the wagons to Peterborough Loop or Peterborough Yard 1.
  3. Coal and water the loco at the main depot or sub depot.
  4. Option: Reattach the loco to the train and continue to Paratoo.
Driving Notes:
  • The length of the train restricts its use of passing loops and yard loops to those located at:-
    • Caltowie Station Loop
    • Jamestown Station + Yard, Jamestown Loop + Yard and Jamestown Goods Loop + Yard
    • Belalie North Station Loop
    • Yongala Station Loop and Yongala Goods Loop
    • Peterborough Loop, Peterborough Station and Peterborough Yard 1
    • Ucolta Station Loop
    • Oodla Wirra Station Loop
    • Peechara Loop (Note that Nantabibbie Loop is too short)
    • Nackara Station Loop and Nackara Goods
    • Methuen Loop
    • Paratoo all loops
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Gladstone (departure), Jamestown (arrival and departure), Peterborough (arrival and departure) and Paratoo (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Location Index for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Location Index for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Location Index for details.

 Gladstone to Peterborough Empty Ore 
 Gladstone to Paratoo Empty Ore 

Moving empty ore wagons from Port Pirie to Broken Hill. Bottom
Each location in the layout has a detailed set of track diagrams that provide the following information:-
  • the names of the tracks, sidings and loops
  • the location of various facilities - stations, turntables, water columns, coal stages, engine sheds, active industries
  • the names of active industries and their products and consumables
  • the names and locations of trackmarks for Drive To and Drive Via commands
  • the names, properties and locations of track switches and lists of switch sets for particular movements
  • Enhanced Interlocking Tower paths for those locations that have EITs
Location Index
To display the location data click any Location Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).
Duration: Gladstone to Peterborough 1 hour 20 minutes
Gladstone to Paratoo 2 hour 45 minutes
Loco: SAR T 201 at Gladstone Depot

Other Unrostered Locos:

  • SAR T 210 at Gladstone Depot
  • SAR T 23 on Peterborough Depot Siding 1
  • SAR T 233 on Peterborough Depot Loco Road 1
  • SAR 407 on Peterborough Depot Repair Shop Road 4
Consist: 22 CCC gondola wagons, 1 DB Guard Van on Gladstone Yard 1

Getting Started:

  1. The first step is to pause the session by pressing the P key.
  2. Next locate your loco. Either:-
    1. Open the Finder (press CTRL-F) and type, in the name field, the name of the loco. For example SAR T 201 (or just T 201 should be enough). Click the tick icon, OR
    2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
  3. Take a few moments to get your bearings. Use the Location Index (this link will open in this window) and click on Gladstone to load its location details and track plans. The Tab PH Grey.png tab will give you the EIT Paths that are available if you wish to use them. The Tab TM Grey.png tab will give you the location and names of the invisible Track Marks for Drive To commands. The Tab IN Grey.png tab will show the names and locations of all active industries and their commodities. The Tab SW Grey.png tab will give the names and locations of all junction switches as well as some switch sets you may want to use.
  4. Each location page has a direct link to the next location page, in all directions, so you can explore along the route.
  5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
  6. Switch back to TRS19 Driver and press the P key to start the session.
Tasks:
  1. Run the loco light engined from the depot to couple to the train on Yard 1.
  2. Deliver the wagons to Peterborough Loop or Peterborough Yard 1.
  3. Coal and water the loco at the main depot or sub depot.
  4. Option: Reattach the loco to the train and continue to Paratoo.
Driving Notes:
  • The length of the train restricts its use of passing loops and yard loops to those located at:-
    • Caltowie Station Loop
    • Jamestown Station + Yard, Jamestown Loop + Yard and Jamestown Goods Loop + Yard
    • Belalie North Station Loop
    • Yongala Station Loop and Yongala Goods Loop
    • Peterborough Loop, Peterborough Station and Peterborough Yard 1
    • Ucolta Station Loop
    • Oodla Wirra Station Loop
    • Peechara Loop (Note that Nantabibbie Loop is too short)
    • Nackara Station Loop and Nackara Goods
    • Methuen Loop
    • Paratoo all loops
  • The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
  • Enhanced Interlocking Towers with set paths are available for your optional use at Gladstone (departure), Jamestown (arrival and departure), Peterborough (arrival and departure) and Paratoo (arrival). Details of all available EIT Paths are provided in the Tab PH Grey.png tab at each location with EITs. Click Location Index for details.
  • Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to  Industry  commands. Details of all available Trackmarks and Industries are provided in the Tab TM Grey.png and Tab IN Grey.png tabs at each location. Click Location Index for details.
  • Manual (no AI) driving is possible. For those locations without home or approach semaphore signals, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Details on all switches and suggested switch paths are provided in the Tab SW Grey.png tab at each location. Click Location Index for details.
Links: All links will open in this window
Scenarios
Session Scenarios List		 Location Index
Location List		 Rolling Stock
Rolling Stock		 Industries
Active Industries		 Top

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

Retrieved from "https://game.ts2009.com/mediaWiki/index.php?title=SAR_Scenario_Paratoo_Empty_Ore&oldid=28358"
Personal tools