CCG/Kind: Bridge Double Track

Latest revision as of 17:19, 15 June 2011

Note: This page describes obsolete asset formats (trainz-build prior to 2.9) and should be removed. The current equivalent of this format is KIND Track.

[edit] KIND: BRIDGE – DOUBLE TRACK

This kind can also be configured to create splines that can be used for placing two or more tracks using the trackoffsets tag.

[edit] Config.txt :

kuid                  <KUID2:####:#####:1>
kind                  "bridge"
length                20
bendy                 1
bridgetrack           <KUID:-1:100396>
trackoffsets          -2.5,2.5
height                0
istrack               1
kuid-table 
{
       0 <KUID:-1:100396>
}
username              "my bridge"
description           "blah blah"
trainz-build          2.5
category-class        "TB"
category-region       "AU"
category-era          "2000s"

[edit] Breakdown:

type Surveyor type ­ e.g. bridge, tunnel or rail.

region Surveyor region.

length Length in metres of each bridge segment.

bridgetrack Kuid for the type of rail used on bridge.

trackoffsets Distance in meters the rail/s are attached to the center of the bridge spline. Any number of tracks can be attached to the spline, only splines with the same track offsets can be connected together.

height 0 is used for double tracks.

istrack 0 = This is a road bridge, 1 = This is a rail bridge.

Refer to Page 94 for information on constructing initiator and terminator models, if required.

For additional notes on splines refer to Page 388.

[edit] Return to CCG Index

Content Creator's Guide