SAR Scenario Terowie Shunter

Revision as of 15:19, 4 December 2021

	14 Terowie Shunter
A scenario in the SAR Peterborough Base Session

Shunting operations in Terowie Yard.

Era:

1920s to 1970

Duration:

50 minutes

Loco:

SAR T 198 at Terowie Loco Depot

Other Unrostered Locos:

SAR T 231 at Terowie Loco Depot

Each location in the layout has a detailed set of track diagrams that provide a variety of information. The Getting Started guide below gives a summary of the information that is available.

To display the data click any Line Index graphic, or go to the bottom of the page for all the session links (all links will open in this window).

Getting Started:

If you have already closed the opening message window then the first step is to pause the session by pressing the P key.
Next locate your loco. Either:-
1. Open the Finder Tool (press Ctrl F ) and type, in the Name field, the name of the loco. For example SAR T 198 (or just T 198 should be enough). Click the tick icon, OR
2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
Take a few moments to get your bearings. Click (this link will open in this window) to show the location details and track plans for Terowie. In each location details page:-
- the tab gives an overall summary of each location with a "potted" history (where available).
- the tab reveals the invisible Track Marks for Drive To commands.
- the tab lists all active industries and their commodities.
- the tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
Each location details page has direct links to the adjacent locations so you can explore along the route.
When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
Switch back to TRS19 Driver and either close the opening message window or press the P key to start the session.

Tutorial:

A tutorial on using these scenarios is provided in the link on the left. The link will open in this window

Yard Map:

Tasks:

Move the loco out of the Loco Depot and run tender first past the Station to the Goods Transfer Sidings.
Couple the loco to the rake of MTW flat wagons stored on the northern (Peterborough) end of Goods Siding 2 .
Take the MTW flat wagons to the Goods Gantry to be loaded.
After loading take the wagons back to the Goods Transfer Sidings and store them on Goods Siding 1 .
Couple the loco to the rake of QLX wagons on Goods Siding 2 .
Take the QLX wagons to the Goods Transfer Shed and load.
After loading move the wagons onto Goods Siding 2 .
The two rakes of loaded wagons on Goods Siding 1 and Goods Siding 2 must be split and recombined into two consists according to their destinations. The destinations, Peterborough and Gladstone, are shown in the name of each wagon. All the Gladstone wagons are to be placed into one consist and the Peterborough wagons into the other consist.
Combine the two consists into one with the Peterborough wagons at the front (Peterborough end) and the Guard Van at the rear of the Gladstone wagons.
Move the combined consist onto the Relief road in the main Terowie Yard.
Return the loco to its starting position in the Loco Depot.

Driving Notes:

You have permission to pass semaphore signals at stop provided you are satisfied that the road ahead is clear.

Links: All links will open in this window
	Session Scenarios	Location List	Drive Tutorial	Rolling Stock	Loco Roster	Active Industries

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

@@ Line 102: / Line 102: @@
 <td align="center">[[image:SAR_Terowie.png|link=|alt=Terowie]]<br><br>
 [[image:SAR_Terowie_Yards.png|link=|alt=Yard map]]</td>
+</tr>
+<tr valign="top">
+<td>&nbsp;</td>
 </tr>
 </table>			                					<!-- END Yard Map Table -->
-<table bgcolor=#f5f5f5 width=820>                <!-- BEGIN Tasks Table -->
+<table bgcolor=#e8e8e8 width=820>                <!-- BEGIN Tasks Table -->
 <tr valign="top">
 <td>
@@ Line 119: / Line 122: @@
 # After loading move the wagons onto <span style="font-weight: 700; color: black; background-color: yellow;">&nbsp;Goods Siding 2&nbsp;</span>.
 # The two rakes of loaded wagons on <span style="font-weight: 700; color: black; background-color: yellow;">&nbsp;Goods Siding 1&nbsp;</span> and <span style="font-weight: 700; color: black; background-color: yellow;">&nbsp;Goods Siding 2&nbsp;</span> must be split and recombined into two consists according to their destinations. The destinations, '''Peterborough''' and '''Gladstone''', are shown in the name of each wagon. All the '''Gladstone''' wagons are to be placed into one consist and the '''Peterborough''' wagons into the other consist.
-# Combine the two consists into one with the '''Peterborough''' wagons at the front ('''Peterborough''') end the '''DB''' Guard Van at the rear of the '''Gladstone''' wagons.
+# Combine the two consists into one with the '''Peterborough''' wagons at the front ('''Peterborough''' end) and the '''Guard Van''' at the rear of the '''Gladstone''' wagons.
 # Move the combined consist onto the <span style="font-weight: 700;"><span style="color: white; background-color: #b8860b;">&nbsp;Relief&nbsp;</span>&nbsp;road</span> in the main '''Terowie Yard'''.
 # Return the loco to its starting position in the <span style="font-weight: 700;"><span style="color: white; background-color: black;">&nbsp;Loco&nbsp;</span> Depot</span>.

SAR Scenario Terowie Shunter

Revision as of 15:19, 4 December 2021

Views

Personal tools

Navigation

Search

Toolbox