SAR Scenario Gladstone Bulk Ore

Latest revision as of 20:14, 10 May 2024

	5 Paratoo to Peterborough Bulk Ore Paratoo to Gladstone Bulk Ore
A scenario in the SAR Peterborough Base Session

Express bulk ore freight from Broken Hill to Port Pirie.

The Historical Bit

The line from Port Pirie to Cockburn on the South Australia - New South Wales border was built in stages from 1875 to 1888 largely to capture the lead, zinc and silver ore traffic from the mines at Broken Hill just over the border in New South Wales. Because the SAR was not allowed to operate into New South Wales, a private railway, the Silverton Tramway, was created to carry the ore across the border. The SAR and Silverton Tramway simply swapped locos at Cockburn on the border. It was called a "tramway" to get around a NSW law banning private railways but not private tramways. Despite the title it was a fully operating heavy haul railway, and one of the most profitable in the country.

The SAR had a monopoly on the ore traffic until 1919 when the NSWGR (New South Wales Government Railways) completed its own standard gauge (4ft 8½in) line from Sydney to Broken Hill but the SAR continued to carry the bulk of the ore because the port and smelter at Port Pirie was much closer to Broken Hill.

A variety of motive power was used on the ore trains. SAR Y class locos were originally used then the SAR T class took over until they were largely replaced by the SAR 406 class locos in the 1950s. In the 1960s the SAR 830 class (narrow gauge) diesel locos started appearing.

By 1970 the narrow gauge line from Port Pirie to Broken Hill had been converted to standard gauge and the Silverton Tramway ceased its ore hauling operations but continues to operate today providing standard gauge shunting services and loco leasing to other rail operators. The SAR 830 class (standard gauge) diesels continued to haul the ore trains well into the 2000s.

Era:	1950s and 1960s
Duration:	Peterborough: 1 hour 25 minutes (includes refuelling time) Gladstone: 2 hours 45 minutes
Loco:	SAR 406 (Garrett) on the Main line approaching Paratoo from the East The has locos available at the Peterborough Loco Depot for an optional loco swap SAR T 23 at Loco Sidings SAR T 233 at Loco Sheds SAR 407 at Repair Shop Sheds
Consist:	Attached to SAR 406 23 CCC Gondola wagons 1 Guard Van.

Each location in the layout has a detailed set of track diagrams that provide a variety of useful information

The Getting Started guide below gives a summary of what is available.

To display this information click any

graphic, or go to the bottom of the page for all the session links (all links will open in this window).

Getting Started:

If you have already closed the opening message window then the first step is to pause the session by pressing the P key.
Next locate your loco. Either:-
- Open the Finder Tool (press Ctrl F ) and type, in the Name field, the name of the loco, in this case SAR 406 (or just 406 should be enough). Click the tick icon, OR
- Open the Driver List (bottom left of the screen) and then scroll through the list to find the loco name (SAR 406) then click the drivers Eye icon to take control of the loco
Take a few moments to get your bearings. Click (this link will open in this window) to show the location details and track plans for Paratoo. In each location details page:-
- the tab gives an overall summary of each location with a "potted" history (where available).
- the tab reveals the invisible Track Marks for Drive To commands.
- the tab lists all active industries and their commodities.
- the tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
Each location details page has direct links to the adjacent locations so you can explore along the route.
When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
Switch back to Driver Mode and either close the opening message window or press the P key to start the session.

Tutorial:

A tutorial on using these scenarios is provided in the link on the left. The link will open in this window

Orders:

Move the train into Paratoo Yard on the Main Line
Fill the tender with water at the Water Column or proceed to Nackara and fill with water at the Water Column located there.
Proceed to Peterborough Loop or Peterborough Yard 1 .
Detach the loco and proceed to Peterborough Main Loco Fuel & Water Point to refuel the tender with bunker c oil and water.
Option: Reattach the loco, or another available loco, to the train and proceed by 09:30 to Gladstone Yard . If you are replacing the 400 class with a different type of loco at Peterborough then you are advised to double-head.

Driving Notes: tr valign="top"> </tr>

A summary of the facilities and product loads at all locations along the line is provided in the link

Fuel oil level is low, but sufficient to reach Peterborough where it can be refilled
Water is very low and you will need to refill either here at Paratoo or at Nackara
The length of the train restricts its use of passing loops and yard loops to those located at:-
- Methuen Loop
- Nackara Station Loop and Nackara Goods
- Peechara Loop (Note that Nantabibbie Loop is too short)
- Oodla Wirra Station Loop
- Ucolta Station Loop
- Peterborough Loop, Peterborough Station and Peterborough Yard 1
- Yongala Station Loop and Yongala Goods Loop
- Belalie North Station Loop
- Jamestown Station + Yard, Jamestown Loop + Yard and Jamestown Goods Loop + Yard
- Caltowie Station Loop
- Gladstone (all loops and yards).
The approaches to all locations are protected by invisible signals to prevent the AI Half Speed Slowdown Problem when approaching a signal at stop.
Trackmarks and industries have been provided for AI Drive To Trackmark, Drive via Trackmark and Drive to Industry commands. Click for details.
Manual (no AI) driving is possible. As a visual driving aid, a Caution warning sign has been placed at the location of the Main Approach Dn and Main Approach Up trackmarks. Click for details.
If driving manually in yards, you are responsible for correctly setting any catch points.

Links: All links will open in this window
	Session Scenarios	Location List	Drive Tutorial	Rolling Stock	Loco Roster	Active Industries

This page was created by Trainz user pware in February 2021 and was last updated as shown below.

@@ Line 1: / Line 1: @@
+<!-- V1.0 -->
 <table width=1000>							<!-- BEGIN Title table -->
 <tr valign="top">
@@ Line 19: / Line 20: @@
 <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&nbsp;The Historical Bit&nbsp;</span><br>
-The line from '''Port Pirie''' to '''Cockburn''' on the '''South Australia - New South Wales''' border was built in stages from 1875 to 1888 largely to capture the lead, zinc and silver ore traffic from the mines at '''Broken Hill''' just over the border in '''New South Wales'''. Because the '''SAR''' was not allowed to operate into '''New South Wales''', a private railway, the '''Silverton Tramway''', was created to carry the ore across the border. The '''SAR''' and '''Silverton Tramway''' simply swapped locos at '''Cockburn''' on the border. It was called a "tramway" to get around a NSW law banning private railways but not private tramways. Despite the title it was a fully operating heavy haul narrow gauge railway.
+The line from '''Port Pirie''' to '''Cockburn''' on the '''South Australia - New South Wales''' border was built in stages from 1875 to 1888 largely to capture the lead, zinc and silver ore traffic from the mines at '''Broken Hill''' just over the border in '''New South Wales'''. Because the '''SAR''' was not allowed to operate into '''New South Wales''', a private railway, the '''Silverton Tramway''', was created to carry the ore across the border. The '''SAR''' and '''Silverton Tramway''' simply swapped locos at '''Cockburn''' on the border. It was called a "tramway" to get around a NSW law banning private railways but not private tramways. Despite the title it was a fully operating heavy haul railway, and one of the most profitable in the country.
-The '''SAR''' had a monopoly on the ore traffic until 1919 when the '''NSWGR''' (New South Wales Government Railways) completed its own line to '''Broken Hill''' but the '''SAR''' continued to carry the bulk of the ore because the port and smelter at '''Port Pirie''' was much closer to '''Broken Hill'''.
+The '''SAR''' had a monopoly on the ore traffic until 1919 when the '''NSWGR''' (New South Wales Government Railways) completed its own standard gauge (4ft 8&frac12;in) line from '''Sydney''' to '''Broken Hill''' but the '''SAR''' continued to carry the bulk of the ore because the port and smelter at '''Port Pirie''' was much closer to '''Broken Hill'''.
-By 1970 the narrow gauge line had been converted to standard gauge and the '''Silverton Tramway''' ceased its ore hauling operations. Today, more than a century after it was formed, the '''Silverton Company''', as it is now known, is still providing shunting services at '''Broken Hill''' and motive power to rail operators.
+A variety of motive power was used on the ore trains. '''SAR Y''' class locos were originally used then the '''SAR T''' class took over until they were largely replaced by the '''SAR 406''' class locos in the 1950s. In the 1960s the '''SAR 830''' class (narrow gauge) diesel locos started appearing.
+By 1970 the narrow gauge line from '''Port Pirie''' to '''Broken Hill''' had been converted to standard gauge and the '''Silverton Tramway''' ceased its ore hauling operations but continues to operate today providing standard gauge shunting services and loco leasing to other rail operators. The '''SAR 830''' class (standard gauge) diesels continued to haul the ore trains well into the 2000s.
 -----
 <table width=1000>							<!-- BEGIN Scenario image and loco/consist table -->
@@ Line 29: / Line 32: @@
 <td width=450>[[image:SAR 406 Paratoo Loaded Ore.png|link=|alt=Loaded Ore]]</td>
 <td>
-<table width=550>							<!-- BEGIN Loco/consist sub table -->
+<table width=550 bgcolor="black">							<!-- BEGIN Loco/consist sub table -->
+<tr valign="top">
+<td>
+<table width=546 bgcolor="white">
 <tr valign="top">
 <td width=75><span style="font-size: 15px; font-weight: 700; color: white; background-color: black;">&nbsp;Era:&nbsp;</span></td>
@@ Line 36: / Line 42: @@
 <tr valign="top">
 <td><span style="font-size: 15px; font-weight: 700; color: white; background-color: black;">&nbsp;Duration:&nbsp;</span></td>
-<td>'''Paratoo''' to '''Peterborough''' 1 hour 25 minutes (includes refuelling time)<br>
+<td>'''Peterborough: 1 hour 25 minutes (includes refuelling time)'''<br>
-'''Paratoo''' to '''Gladstone''' 2 hours 45 minutes</td>
+'''Gladstone: 2 hours 45 minutes'''</td>
 </tr>
 <tr valign="top">
 <td><span style="font-size: 15px; font-weight: 700; color: white; background-color: black;">&nbsp;Loco:&nbsp;</span></td>
 <td>'''[[SAR_Scenario_Rolling_Stock#SAR_400_Class|SAR 406]]''' (Garrett) on the <span style="font-weight: 700;"><span style="color: white; background-color: blue;">&nbsp;Main&nbsp;</span> line</span> approaching '''Paratoo''' from the '''East'''<br>
-'''Other Available Locos:''' [[image:Loco_Roster_Label.png|link=SAR Peterborough Division Loco Roster]]
+'''The [[image:Loco_Roster_Label.png|link=SAR Peterborough Division Loco Roster]] has locos available at the <span style="color: white; background-color: black;">&nbsp;Peterborough Loco Depot&nbsp;</span>''' for an optional loco swap
-*'''[[SAR_Scenario_Rolling_Stock#SAR_T_Class|SAR T 23]]'''  on <span style="font-weight: 700;">Peterborough Depot <span style="color: white; background-color: black;">&nbsp;Siding 1&nbsp;</span></span>
+*'''[[SAR_Scenario_Rolling_Stock#SAR_T_Class|SAR T 23]]  at <span style="color: white; background-color: black;">&nbsp;Loco Sidings&nbsp;</span>'''
-*'''[[SAR_Scenario_Rolling_Stock#SAR_T_Class|SAR T 233]]''' on <span style="font-weight: 700;">Peterborough Depot <span style="color: white; background-color: black;">&nbsp;Loco Road 1&nbsp;</span></span>
+*'''[[SAR_Scenario_Rolling_Stock#SAR_T_Class|SAR T 233]] at <span style="color: white; background-color: black;">&nbsp;Loco Sheds&nbsp;</span>'''
-*'''[[SAR_Scenario_Rolling_Stock#SAR_400_Class|SAR 407]]''' on <span style="font-weight: 700;">Peterborough Depot <span style="color: white; background-color: black;">&nbsp;Repair Shop Road 4&nbsp;</span></span></td>
+*'''[[SAR_Scenario_Rolling_Stock#SAR_400_Class|SAR 407]] at <span style="color: white; background-color: black;">&nbsp;Repair Shop Sheds&nbsp;</span>'''
+</td>
 </tr>
 <tr valign="top">
 <td><span style="font-size: 15px; font-weight: 700; color: white; background-color: black;">&nbsp;Consist:&nbsp;</span></td>
-<td>Attached to '''[[SAR_Scenario_Rolling_Stock#SAR_400_Class|SAR 406]]''': 23 '''[[SAR_Scenario_Rolling_Stock#TGR_CCC|CCC Gondola]]''' wagons, 1 '''[[SAR_Scenario_Rolling_Stock#TGR_DB|Guard Van]]'''.
+<td>Attached to '''[[SAR_Scenario_Rolling_Stock#SAR_400_Class|SAR 406]]'''
+*23 '''[[SAR_Scenario_Rolling_Stock#TGR_CCC|CCC Gondola]]''' wagons
+*1 '''[[SAR_Scenario_Rolling_Stock#Guard_Vans|Guard Van]]'''.
 </td>
 </tr>
-<tr valign="top">
+</table>
-<td colspan=2>
-<table bgcolor="lightcyan">		<!-- BEGIN Location Data table -->
-<tr>
-<td>
-[[Image:Location Index.png|link=SAR Index|alt=Location Index|Location Index]]<br>
-[[image:Line_Index_Label.png|link=SAR_Index|Location Index]]</td>
-<td>'''Each location in the layout has a detailed set of track diagrams that provide a variety of information.''' The <span style="font-weight: 700; color: white; background-color: black;">&nbsp;Getting Started&nbsp;</span> guide below gives a summary of the information that is available.<br><br>
-To display the data click any '''Line Index''' graphic, or go to the bottom of the page for all the session links (all links will open in this window).</td>
-</tr>
-</table>						<!-- END Location Data table -->
 </td>
 </tr>
@@ Line 69: / Line 68: @@
 </tr>
 </table>						<!-- END Scenario image and loco/consist table -->
-<br>
+<table bgcolor="lightcyan" width=1000>		<!-- BEGIN Location Data table -->
+<tr>
+<td>[[Image:Location Index.png|link=SAR Index|alt=Location Index|Location Index]]</td>
+<td>'''Each location in the layout has a detailed set of track diagrams that provide a variety of useful information'''<br>
+The <span style="font-weight: 700; color: white; background-color: black;">&nbsp;Getting Started&nbsp;</span> guide below gives a summary of what is available.<br>
+To display this information click any [[image:Line_Index_Label.png|link=SAR_Index|Location Index]] graphic, or go to the bottom of the page for all the session links (all links will open in this window).</td>
+</tr>
+</table>						<!-- END Location Data table -->
 <table cellpadding="2" bgcolor="black" width=1000> 				<!-- BEGIN Black border for Getting Started table -->
 <tr valign="top">
@@ Line 78: / Line 84: @@
 # If you have already closed the opening message window then the first step is to pause the session by pressing the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&nbsp;P&nbsp;</span> key.
 # Next locate your loco. '''Either''':-
-## Open the '''Finder Tool''' (press <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&nbsp;Ctrl&nbsp;</span> <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&nbsp;F&nbsp;</span>) and type, in the '''Name''' field, the name of the loco. For example '''SAR 406''' (or just '''406''' should be enough). Click the '''tick''' icon, '''OR'''
+#*Open the '''Finder Tool''' (press <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&nbsp;Ctrl&nbsp;</span> <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&nbsp;F&nbsp;</span>) and type, in the '''Name''' field, the name of the loco, in this case '''SAR 406''' (or just '''406''' should be enough). Click the '''tick''' icon, '''OR'''
-## Open the '''Driver List''' (bottom left of the screen) and select the loco from there - click the drivers '''Eye''' icon to jump to the loco.
+#*Open the '''Driver List''' (bottom left of the screen) and then scroll through the list to find the '''loco name''' ('''SAR 406''') then click the drivers '''Eye''' icon [[image:Driver_Eye.png|link=]] to take control of the loco
 # Take a few moments to get your bearings. Click [[image:Line_Index_Paratoo.png|link=SAR_Paratoo|Paratoo Data]] (this link will open in this window) to show the location details and track plans for '''Paratoo'''. In each location details page:-
 #*the [[image:Tab_HM_White.png|link=|75px]]&nbsp;tab gives an overall summary of each location with a "potted" history (where available).
@@ Line 121: / Line 127: @@
 # Proceed to <span style="font-weight: 700;">Peterborough <span style="color: white; background-color: #008100;">&nbsp;Loop&nbsp;</span></span> or <span style="font-weight: 700;">Peterborough <span style="color: black; background-color: cyan;">&nbsp;Yard 1&nbsp;</span></span>.
 # Detach the loco and proceed to <span style="font-weight: 700;">Peterborough Main <span style="color: white; background-color: black;">&nbsp;Loco Fuel &amp; Water&nbsp;</span> Point</span> to refuel the tender with '''bunker c oil''' and '''water'''.
-# '''Option:''' Reattach the loco, or another available loco, to the train and proceed by 09:30 to <span style="font-weight: 700;">Gladstone <span style="color: black; background-color: cyan;">&nbsp;Yard&nbsp;</span></span>.
+# '''Option:''' Reattach the loco, or another available loco, to the train and proceed by 09:30 to <span style="font-weight: 700;">Gladstone <span style="color: black; background-color: cyan;">&nbsp;Yard&nbsp;</span></span>. If you are replacing the '''400 class''' with a different type of loco at '''Peterborough''' then you are advised to double-head.
 </td>
 <td width=100>[[image:SAR Train Order Rotated.png|100px|link=|alt=Logo]]</td>
@@ Line 136: / Line 142: @@
 tr valign="top">
 <td>
+A summary of the facilities and product loads at all locations along the line is provided in the link [[Image:SAR_PortPirie-BrokenHill_Line.png|link=SAR Port Pirie-Broken Hill|alt=Port Pirie-Broken Hill Line|Show Port Pirie-Broken Hill Line]]
 *Fuel oil level is low, but sufficient to reach '''Peterborough''' where it can be refilled
 *Water is very low and you will need to refill either here at '''Paratoo''' or at '''Nackara'''

SAR Scenario Gladstone Bulk Ore

Latest revision as of 20:14, 10 May 2024

Views

Personal tools

Navigation

Search

Toolbox