Latest revision as of 14:41, 27 July 2024

The information in this Wiki Page applies to TANE, TRS19, Trainz Plus and TRS22.

1 What is a Portal?
2 Adding a Portal
- 2.1 In Surveyor Classic (S10)
- 2.2 In Surveyor 2.0 (S20)
3 Configuring a Basic Portal
- 3.1 Produce Trains
- 3.2 Consume Trains
  - 3.2.1 Consume Only Specific Trains
  - 3.2.2 Return Consumed Trains
4 Configuring an Enhanced Portal
- 4.1 Quick Portal Manager Standard Edition Rule (SP2 and later)
5 Portals and the UDS (Unified Driver Surveyor) Interface
6 Trainz Wiki

	Portals are track objects that can add and remove trains during the running of a Session
	Portals can be used to move trains from one part of a Route to another

[edit] What is a Portal?

Portals come in a variety of forms - some resemble tunnels and others look like a section of normal track. One portal is a Track Marker.

The basic portals supplied with Trainz can be configured to:-

remove trains that are sent to them or pass through them (the portals that look like track can be used to let certain trains pass through while "swallowing" others).

The removed trains can be:-

	removed permanently, or
	returned to the Session through the same portal or another portal after a set time delay

add new trains to the Session. The new trains:-

	will have drivers with orders to follow
	can be randomly selected from available consists

Portals can be "enhanced" by using Session Rules that add additional features and capabilities

Enhanced portals can have features such as:-

	adding new trains to the Session according to a set schedule ranging from once only, once per day or at set clock times
	varying the drivers of added trains and their commands according to a set schedule
	varying the consists of added trains

[edit] Adding a Portal

[edit] In Surveyor Classic (S10)

The quickest way to find all the train producing and consuming portals in the Surveyor Object Tool window is to set up a search filter. This will sort the portals you want from all the objects named "portal" such as tunnel portals.

Steps: To find a Portal in Content Manager:- Set an advanced search filter by:-
	Pressing Ctrl + Shift + F
	Left Click + and add the filter Name and enter Portal (upper/lower case is not important) in its text entry box
	Left Click + and add the filter Category and its sub-category Industry The Objects selection window will now show only those objects that match your search criteria.
	Open the Object Tools "fly-out" (or press the F3 key)
The objects list will show all scenery assets that meet your entered search

The portals will NOT work correctly if the Trainz Settings - Dev Tab - Compatibility mode: from the Trainz Launcher is set to Maximize performance. This setting should be left at Maximize compatibility

[edit] In Surveyor 2.0 (S20)

Surveyor 2.0 is currently only available for Trainz Plus and TRS22 Platinum Edition

Steps: To find a Portal in the Assets Palette:-

In the Filter Palette Left Click on the Scenery Objects icon or select Scenery Objects from the Content Drop Down box

FilterAssetsPaletteSearchPortals S20.png

Notes:

If both the Filter Palette and Assets Palette are not shown on the screen, then:-

	open the Window Menu from the menu icons at the top of the screen
	If either palette does not have a next to its name then Left Click on the palette name to add a and make it visible
	If the palettes have ticks but are not visible then check the minimised area at the bottom of the list where Mini Map is located. If their names appear there then they have been minimised. To restore the palettes to the screen Left Click on the palette names in the minimised area, NOT in the palette area above.

	In the Assets Palette enter the text "portal" (UPPER/lower case does not matter) into the Search text box
	Left Click on an entry to select it. If you are not sure about an asset then Double Left Click on the name to bring up its image and description
	Left Click in your Trainz World to add the portal to the scene

Steps: To open the Properties window of an asset, including a Portal, in Surveyor 2.0
	Left Click on its Context Icon as shown in the image left
	Left Click on Edit Properties to configure the portal

[edit] Configuring a Basic Portal

Open the properties window of a portal in the route.

Settings:

This portal is set to:-

	Produce a train every 15 minutes (but the train consist has not yet been specified)
	Consume all trains that are sent to the portal or pass through the portal
	The consumed trains will not be returned to the Session

Notes:

In TRS19, Trainz Plus and TRS22 the time entered is in real minutes as determined by an external clock and not according to the Trainz Clock Time which may be set to run at a higher speed (e.g. 10X normal).

[edit] Produce Trains

Steps: To add consists to be produced by the portal:-
	Produce new trains
	set the desired time interval (in minutes) between the trains
	Left Click the ; Add new consist

Steps: To manually add rolling stock objects:-
	Left Click to manually construct a consist from the Session rolling stock list
	Left Click Add driver to consist to add a driver from the Session list
	Left Click Add an existing saved consist to add a saved consist from those that you have already saved as Train Consist Assets

[edit] Construct a Consist

Settings:

For each vehicle in the consist you can specify:-

	how many to add (they will be coupled together)
	the direction the vehicle(s) will face

You can also:-

	delete vehicles or the entire consist
	insert additional vehicles inside the consist
	add additional vehicles at the end of the consist

Notes:

	the first vehicle in the list will be the first vehicle produced by the portal
	it is NOT possible to easily reorder the vehicles in a consist
	to add more of the same vehicles in a different location in the consist, add the vehicles as a separate entry in the list
	add another consist and driver by a Left Click on the Add new consist ; again

[edit] Add a Saved Consist

If you have already saved your consists in Trainz using the Trainz Tool then those consists can be quickly and easily added to the portal consist list.

Steps: To add a saved consist to a portal:-

Scroll through the list to find the saved consist

Select the consist, then either:-

	Left Click the icon to accept the selection and load it into the portal consist list, OR
	Left Click the icon to reject the selection and return to the previous screen

[edit] Add a Driver

Settings:

You can:-

	Select a new driver and icon
	Rename the driver
	Add driver commands
	Delete the driver

For information on adding driver commands see the Trainz Wiki Page at:-

Driver Setup Rule

[edit] Consume Trains

To remove trains from the Session

Choices:

Consume trains then either

Accept all trains to remove any and all trains that enter the portal, OR

Accept trains matching specific criteria to only remove certain trains that enter the portal

For "dead end" portals (those that have no exit) the Accept all trains option is the option that should be used

[edit] Consume Only Specific Trains

After selecting the option Accept trains matching specific criteria a new set of controls will appear

Settings:

Accept trains matching specific criteria

	You can set any one, any two or all three of the consist selection criteria
	Any train that matches the entered settings will be removed from the Session as it enters the portal, other trains will be ignored

Control Options:-

Specific Vehicles - normally used to specify just one particular train in the Session

	You must select, from the Session list, the exact name given to a vehicle. This is the name that has been entered into the property window of that vehicle
	The order of the vehicles, if there is more than one, is not important
	You only need to select enough names to correctly identify the consist that contains the vehicle or vehicles (the locomotive name is usually sufficient)

Vehicles Types - normally used to specify a number of different trains in the session e.g. all trains with a particular type of coal wagon

	You must select, from the Session list, the general name of the type of vehicle or vehicles - this is the name shown in the Trains Tool when the vehicle is added to a layout
	If you have identified Specific Vehicles (above) then you would normally not need to set this option

Drivers - used to specify trains driven by particular drivers

	Select the driver or drivers from the Session driver list
	If your drivers change trains or consists during a Session then it may be useful to combine this with one of the other two options

An example:-

Notes:

In this example, the portal will remove any train that:-

	contains locomotive BR HST 125 with the running number 253007
OR has any of the following vehicles:-
	BR HST MK3 TF with any running numbers
	BR HST MK3 TRUK with any running numbers
OR is driven by any of the following drivers:-
	Alan
	Andrea

[edit] Return Consumed Trains

A train that has been returned after entering a portal will return to the Session with any remaining driver commands still in its Driver Schedule. It will then immediately start obeying those commands

To return consumed trains back into the Session

Settings:

To return the train from a different portal:-

	Set Train returns through alternate portal, and
	Enter the exact name of the alternate portal

Settings:

	Set Train returns after ... and
	Double Left Click on 5 real minutes to set the time delay (in real minutes, not Trainz Clock minutes) between the train being consumed and produced, then select one option from:-

Choices:

Train is not loaded or unloaded - no changes will be made to the loads carried in each vehicle

Train is loaded only - each vehicle will be loaded when it exits the portal

Train is unloaded only - each vehicle will be unloaded when it exits the portal

Empty trains are loaded, other trains are unloaded - vehicles that are empty when entering the portal will be loaded when they exit the portal, all other vehicles will be unloaded

If the driver command that sent a train to the consuming portal was the final command in its schedule, then it will emerge from the portal with an empty Driver Schedule. It will come to a halt immediately after leaving the portal.

[edit] Configuring an Enhanced Portal

There are a number of portals available on the DLS that have additional features or capabilities that are not found in the basic portals built into Trainz. There are also Session Rules available on the DLS that will give additional features or capabilities to the basic portals.

[edit] Quick Portal Manager Standard Edition Rule (SP2 and later)

This is a Session Rule, by pguy, that manages the portals and adds flexible timetables to their operations. It is available on the DLS.

<kuid2:61392:5011:45> - correct at the time this document was written

[edit] Portals and the UDS (Unified Driver Surveyor) Interface

The UDS is an option for rapid switching, in both directions, between Driver and Surveyor. It is available in TRS19 Platinum Edition and later versions of Trainz. The UDS does not affect the operation of portals but it has revealed one previously unnoticed property of portals.

A train that is driven into a portal and later returned to the layout will be returned in the same layer as the portal and not in the trains originally assigned layer. Trains that are produced by a portal will be assigned to the same layer as the portal. This has possibly always been the case with portals but was probably unnoticed until the arrival of the UDS. It seems to have no other noticeable effect on trains.

This could become an issue if you make the switch from Driver to Surveyor after a train has been returned to the layout from a portal. For example, if a train is originally in a Session Layer then it is part of a Session. If it is returned from a portal then it will now be in a Route Layer and will be part of the Route. If you then switch from Driver to Surveyor and save the Route then the train will be saved in the Route not in the Session. If this is an issue then the remedy is to open the property dialogue window of any wagon in the train after it has left the portal and change its assigned layer to the correct one. This will set all vehicles in that train to the same correct layer.

[edit] Trainz Wiki

More Tutorials and Guides to Using Trainz

This page was created by Trainz user pware in July 2018 and was last updated as shown below.

How to Use Portals

Latest revision as of 14:41, 27 July 2024

Contents

[edit] What is a Portal?

[edit] Adding a Portal

[edit] In Surveyor Classic (S10)

[edit] In Surveyor 2.0 (S20)

[edit] Configuring a Basic Portal

[edit] Produce Trains

[edit] Construct a Consist

[edit] Add a Saved Consist

[edit] Add a Driver

[edit] Consume Trains

[edit] Consume Only Specific Trains

[edit] Return Consumed Trains

[edit] Configuring an Enhanced Portal

[edit] Quick Portal Manager Standard Edition Rule (SP2 and later)

[edit] Portals and the UDS (Unified Driver Surveyor) Interface

[edit] Trainz Wiki

Views

Personal tools

Navigation

Search

Toolbox

@@ Line 1: / Line 1: @@
+The information in this Wiki Page applies to '''TANE''', '''TRS19''', '''Trainz Plus''' and '''TRS22'''.
+<table>
+<tr valign="top">
+<td>
 __TOC__
+</td>
+<td width=700>
+<table bgcolor="lightcyan" cellpadding=2>
+<tr valign="top">
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>'''Portals''' are track objects that can add and remove trains during the running of a Session</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>'''Portals''' can be used to move trains from one part of a Route to another</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table width=1000>						<!-- BEGIN Nav Buttons Table -->
+<tr valign="top">
+<td width=729><span id="stepWhat"></span>&nbsp;</td>
+<td width=46>[[image:BackToTop.png|link=#top|alt=Top|Top]]</td>
+<td width=75>&nbsp;</td>
+<td width=75>[[image:NextDown.png|link=#stepConfiguring|alt=Next Down|Next Down]]</td>
+<td width=75>[[image:BackToBottom.png|link=#bottom|alt=Bottom|Bottom]]</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 ='''What is a Portal?'''=
-<table cellpadding="4" bgcolor=#c1e7e7>
+<table width=1000>
+<tr valign="top">
+<td>[[image:PortalTypeScreenShot.PNG|link=]]</td>
+<td>
+Portals come in a variety of forms - some resemble tunnels and others look like a section of normal track. One portal is a '''Track Marker'''.<br><br>
+The basic portals supplied with Trainz can be configured to:-
+<table>
+<tr valign="top">
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>remove trains that are sent to them or pass through them (the portals that look like track can be used to let certain trains pass through while "swallowing" others).<br>
+The removed trains can be:-
+<table>
 <tr valign="top">
-<td>[[file:DotPoint.JPG]]</td>
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
-<td>'''Portals are track objects that can add and remove trains during the running of a Session'''</td>
+<td>removed permanently, or</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>returned to the Session through the same portal or another portal after a set time delay</td>
+</tr>
+</table>
+</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>add new trains to the Session. The new trains:-
+<table>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>will have drivers with orders to follow</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>can be randomly selected from available consists</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table bgcolor="lightcyan" cellpadding=2>
+<tr valign="top">
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>Portals can be "enhanced" by using '''Session Rules''' that add additional features and capabilities
+</td>
 </tr>
 </table>
@@ Line 10: / Line 80: @@
 <table>
 <tr valign="top">
-<td>[[file:PortalTypeScreenShot.PNG]]</td>
+<td>Enhanced portals can have features such as:-
+<table>
+<tr valign="top">
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>adding new trains to the Session according to a set schedule ranging from ''once only'', ''once per day'' or at ''set clock times''</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>varying the drivers of added trains and their commands according to a set schedule</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlueDot10x10.png|link=]]</td>
+<td>varying the consists of added trains</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+='''Adding a Portal'''=
+=='''<span style="color: black; background-color: cyan;">&#160;In Surveyor Classic (S10)&#160;</span>'''==
+<table width=1000>
+<tr valign="top">
+<td>[[image:PortalSearchSettings.PNG|link=]]</td>
+<td>The quickest way to find all the train producing and consuming portals in the '''Surveyor Object Tool''' window is to set up a search filter. This will sort the portals you want from all the objects named "portal" such as tunnel portals.
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
 <td>
-<table cellpadding="4" bgcolor=#ffffb0>
+<table bgcolor=#ffffff cellpadding=2>
 <tr valign="top">
-<td>[[file:NotePad.PNG]]</td>
+<td colspan=2><span style="font-weight: 700; font-size: 17px;">Steps:</span> To find a '''Portal''' in '''Content Manager''':-<br>
-<td><font size="3">'''Notes:'''</font><br>
+Set an advanced search filter by:-</td>
-Portals come in a variety of forms - some resemble tunnels and others look like a section of normal track.<br><br>
+</tr>
-The basic portals supplied with TANE can be configured to:-
+<tr valign="top">
-*remove trains that are sent to them or pass through them (the portals that look like track can be used to let certain trains pass through while "swallowing" others). The removed trains can be:-
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
-**removed permanently, or
+<td>Pressing <span style="font-weight: 700; font-size: 15px;"><span style="color: white; background-color: black;">&#160;Ctrl&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;Shift&#160;</span>&#160;+&#160;<span style="color: white; background-color: black;">&#160;F&#160;</span></span></td>
-**returned to the Session through the same portal or another portal after a set time delay
+</tr>
-*add new trains to the Session. The new trains:-
+<tr valign="top">
-**will have drivers with orders to follow
+<td>[[image:DotPoint2.JPG|link=]]</td>
-**can be randomly selected from available consists
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> <span style="color: white; background-color: black; font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;+&#160;</span> and add the filter <span style="color: white; background-color: black; font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Name&#160;</span> and enter '''Portal''' (upper/lower case is not important) in its text entry box</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint3.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> <span style="color: white; background-color: black; font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;+&#160;</span> and add the filter <span style="color: white; background-color: black; font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Category&#160;</span> and its sub-category '''Industry'''<br>
+:The '''Objects''' selection window will now show only those objects that match your search criteria.</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint4.JPG|link=]]</td>
+<td>Open the '''Object Tools''' "fly-out" (or press the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;F3&#160;</span> key)</td>
+</tr>
+<tr valign="top">
+<td colspan=2>The objects list will show all scenery assets that meet your entered search</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
 <br>
-<table cellpadding="4" bgcolor=#c1e7e7>
+<table bgcolor=#ff0000 width=1000>
 <tr valign="top">
-<td>[[file:DotPoint.JPG]]</td>
+<td>
-<td>Portals can be "enhanced" by using '''Session Rules''' that add additional features and capabilities</td>
+<table bgcolor=#fcbcbc>
+<tr valign="top">
+<td>[[image:Stop.PNG|link=]]</td>
+<td>
+The portals will '''NOT''' work correctly if the '''Trainz Settings - Dev Tab - Compatibility mode:''' from the '''Trainz Launcher''' is set to '''Maximize performance'''. This setting should be left at '''Maximize compatibility'''
+</td>
 </tr>
-</table><br>
+</table>
-Enhanced portals can have features such as:-
+</td>
-*adding new trains to the Session according to a set schedule ranging from ''once only'', ''once per day'' or at ''set clock times''
-*varying the drivers of added trains and their commands according to a set schedule
-*varying the consists of added trains</td>
 </tr>
-</table></td>
+</table>
+=='''<span style="color: white; background-color: blue;">&#160;In Surveyor 2.0 (S20)&#160;</span>'''==
+<table width=1000 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table width=996 bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td><span style="font-size: 15px;">'''Surveyor 2.0''' is currently only available for '''Trainz Plus''' and '''TRS22 Platinum Edition'''</span></td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
 <br>
+<table width=1000>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 17px;">Steps:</span> To find a '''Portal''' in the '''Assets Palette''':-</td>
+</tr>
+<tr valign="top">
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
+<td>In the '''Filter Palette''' <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the '''Scenery Objects''' icon or select '''Scenery Objects''' from the '''Content Drop Down''' box</td>
+</tr>
+<tr valign="top">
+<td colspan=2>
+<table>
+<tr valign="top">
+<td width=210>[[image:FilterAssetsPaletteSearchPortals_S20.png|link=]]</td>
+<td>
+<table width=786 bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table width=782 bgcolor=#ffffb0 cellpadding=2>
+<tr valign="top">
+<td width=22>[[image:NotePad.PNG|link=]]</td>
+<td width=374><span style="font-size: 17px; font-weight: 700;">Notes:'''</span><br>
+----
+</td>
+</tr>
+<tr valign="top">
+<td colspan=2>
+If both the '''Filter Palette''' and '''Assets Palette''' are not shown on the screen, then:-
+<table>
+<tr valign="top">
+<td width=175>[[image:WindowsMenu_S20.png|link=|alt=Windows Menu]]</td>
+<td>
+<table>
+<tr valign="top">
+<td width=25>[[image:DotPoint1Blue.png|link=]]</td>
+<td>open the [[image:SurveyorWindowIcon.png|link=]]&#160;'''Window&#160;Menu''' from the menu icons at the top of the screen</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint2Blue.png|link=]]</td>
+<td>If either palette does not have a [[image:Tick.PNG|link=]] next to its name then <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the palette name to add a [[image:Tick.PNG|link=]] and make it visible</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint3Blue.png|link=]]</td>
+<td>If the palettes have ticks but are not visible then check the minimised area at the bottom of the list where '''Mini Map''' is located. If their names appear there then they have been minimised. To restore the palettes to the screen <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the palette names in '''the minimised area''', '''NOT''' in the palette area above.</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table width=1000>
+<tr valign="top">
+<td width=25>[[image:DotPoint2.JPG|link=]]</td>
+<td>In the '''Assets Palette''' enter the text "portal" ('''UPPER/lower case''' does not matter) into the <span style="font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Search&#160;</span> text box</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint3.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on an entry to select it. If you are not sure about an asset then <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Double Left Click&#160;</span> on the name to bring up its image and description</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint4.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> in your '''Trainz World''' to add the portal to the scene</td>
+</tr>
+</table>
+<br>
+<table width=1000>
+<tr valign="top">
+<td>[[image:PortalObject_S20.png|link=|alt=Portal Context menu S20]]</td>
+<td>
+<table bgcolor=#000000 cellpadding=2>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 17px;">Steps:</span> To open the '''Properties''' window of an asset, including a Portal, in '''Surveyor 2.0'''</td>
+</tr>
+<tr valign="top">
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on its '''Context Icon''' as shown in the image left</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint2.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on <span style="Font-weight: 700; font-size: 15px; color: white; background-color: black;">&#160;Edit Properties&#160;</span> to configure the portal</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<table>						<!-- BEGIN Nav Buttons Table -->
+<tr valign="top">
+<td width=729><span id="stepConfiguring"></span>&nbsp;</td>
+<td width=46>[[image:BackToTop.png|link=#top|alt=Top|Top]]</td>
+<td width=75>[[image:NextUp.png|link=#stepWhat|alt=Next Up|Top]]</td>
+<td width=75>[[image:NextDown.png|link=#stepEnhanced|alt=Next Down|Next Down]]</td>
+<td width=75>[[image:BackToBottom.png|link=#bottom|alt=Bottom|Bottom]]</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 ='''Configuring a Basic Portal'''=
@@ Line 47: / Line 293: @@
 <table>
 <tr valign="top">
-<td>[[file:PortalProperties01.PNG]]</td>
+<td>[[image:PortalProperties01.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#eeeeee>
+<table cellpadding=4 bgcolor=#eeeeee>
 <tr>
 <td colspan="2">
@@ Line 55: / Line 301: @@
 </tr>
 <tr valign="top">
-<td>[[file:Gears.PNG]]</td>
+<td>[[image:Gears.PNG|link=]]</td>
-<td><font size="3">'''Settings:'''</font><br>
+<td><span style="font-size: 17px;">'''Settings:'''</span><br>
-This portal is set to:-<br>
+This portal is set to:-
-*Produce a train every 15 minutes (but the train consist has not yet been specified)
+<table>
-*Consume all trains that are sent to the portal or pass through the portal
+<tr valign="top">
-*The consumed trains will not be returned to the Session</td>
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
+<td>Produce a train every 15 minutes (but the train consist has not yet been specified)</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>Consume all trains that are sent to the portal or pass through the portal</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>The consumed trains will not be returned to the Session</td>
+</tr>
+</table>
+</td>
 </tr>
 <tr>
@@ Line 68: / Line 326: @@
 </table>
-<table cellpadding="4" bgcolor=#ffffb0>
+<table bgcolor=#000000 width=550>
 <tr valign="top">
-<td>[[file:NotePad.PNG]]</td>
+<td>
-<td><font size="3">'''Notes:'''</font><br>
+<table bgcolor=#ffffb0 width=546>
-The difference between the two time setting shown is:-
+<tr valign="top">
-*'''Trainz Minutes''' refers to the "virtual" minutes as shown on the Session clock in the Heads Up Display in Driver. For example: If you have set the Session time to run at 2x normal speed then 10 minutes of Session time will be 5 minutes according to your watch
+<td>[[image:NotePad.PNG|link=]]</td>
-*'''Real Minutes''' refers to the actual minutes as shown on your watch or computer date/time display, which may not be the same as shown on the Session clock as described above</td>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
+----
+In '''TRS19''', '''Trainz Plus''' and '''TRS22''' the time entered is in '''real minutes''' as determined by an external clock and not according to the '''Trainz Clock Time''' which may be set to run at a higher speed (e.g. 10X normal).
+</td>
 </tr>
-</table></td>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
 <br>
-==Produce Trains==
+=='''Produce Trains'''==
 <table>
 <tr>
-<td>[[file:PortalProduceNewTrains.PNG]]</td>
+<td>[[image:PortalProduceNewTrains.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#ffffff>
-<tr>
+<table bgcolor=#000000 cellpadding=2>
-<td colspan="2">
+<tr valign="top">
-----</td>
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 17px;">Steps:</span> To add consists to be produced by the portal:-</td>
 </tr>
 <tr valign="top">
-<td>[[file:Steps.PNG]]</td>
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
-<td><font size="3">'''Steps:'''</font><br>
+<td>[[image:CheckBox.PNG|link=]] '''Produce new trains'''</td>
-To add consists to be produced by the portal:-
-#[[file:CheckBox.PNG]] '''Produce new trains'''
-#set the desired time interval (in minutes) between the trains
-#click the link '''''<u>Add new consist</u>'''''</td>
 </tr>
-<tr>
+<tr valign="top">
-<td colspan="2">
+<td>[[image:DotPoint2.JPG|link=]]</td>
-----</td>
+<td>set the desired time interval (in minutes) between the trains</td>
 </tr>
-</table></td>
+<tr valign="top">
+<td>[[image:DotPoint3.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> the ; '''<span style="text-decoration: underline;">Add new consist</span>'''</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
 <table>
 <tr>
-<td>[[file:PortalProperties02.PNG]]</td>
+<td>[[image:PortalProperties02.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#ffffff>
-<tr>
-<td colspan="2">
+<table bgcolor=#000000 cellpadding=2>
-----</td>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 17px;">Steps:</span> To manually add rolling stock objects:-</td>
 </tr>
 <tr valign="top">
-<td>[[file:Steps.PNG]]</td>
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
-<td><font size="3">'''Steps:'''</font><br>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> [[image:PortalPlusIcon.PNG|link=]] to manually '''construct a consist''' from the Session rolling stock list</td>
-Click:-
-*[[file:PortalPlusIcon.PNG]] to manually '''construct a consist''' from the Session rolling stock list
-*'''''<u>Add driver to consist</u>''''' to '''add a driver''' from the Session list
-*'''''<u>Add an existing saved consist</u>''''' to '''add a saved consist''' from those that you have already saved in TANE</td>
 </tr>
 <tr valign="top">
-<td colspan="2">
+<td>[[image:DotPoint2.JPG|link=]]</td>
-----</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> '''<span style="text-decoration: underline;">Add driver to consist</span>''' to '''add a driver''' from the Session list</td>
 </tr>
-</table></td>
+<tr valign="top">
+<td>[[image:DotPoint3.JPG|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> '''<span style="text-decoration: underline;">Add an existing saved consist</span>''' to '''add a saved consist''' from those that you have already saved as '''Train Consist Assets'''</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 135: / Line 415: @@
 <table>
 <tr valign="top">
-<td>[[file:PortalProperties04.PNG]]</td>
+<td>[[image:PortalProperties04.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#eeeeee>
+<table cellpadding=4 bgcolor=#eeeeee>
 <tr>
 <td colspan="2">
@@ Line 143: / Line 423: @@
 </tr>
 <tr valign="top">
-<td>[[file:Gears.PNG]]</td>
+<td>[[image:Gears.PNG|link=]]</td>
-<td><font size="3">'''Settings:'''</font><br>
+<td><span style="font-size: 17px;">'''Settings:'''</span><br>
 For each vehicle in the consist you can specify:-
-*how many to add (they will be coupled together)
+<table>
-*the direction the vehicle(s) will face
+<tr valign="top">
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
+<td>how many to add (they will be coupled together)</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>the direction the vehicle(s) will face</td>
+</tr>
+</table>
 You can also:-
-*delete vehicles or the entire consist
+<table>
-*insert additional vehicles ''inside'' the consist
+<tr valign="top">
-*add additional vehicles at the end of the consist</td>
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
+<td>delete vehicles or the entire consist</td>
 </tr>
 <tr valign="top">
-<td colspan="2">
+<td>[[image:BlackDot10x10.png|link=]]</td>
-----</td>
+<td>insert additional vehicles ''inside'' the consist</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>add additional vehicles at the end of the consist</td>
 </tr>
 </table>
-<table cellpadding="4" bgcolor=#ffffb0>
+</td>
+</tr>
+</table>
+<table bgcolor=#000000 width=550>
 <tr valign="top">
-<td>[[file:NotePad.PNG]]</td>
+<td>
-<td><font size="3">'''Notes:'''</font><br>
+<table bgcolor=#ffffb0 width=546>
-*It is NOT possible to easily reorder the vehicles in a consist
+<tr valign="top">
-*To add more of the same vehicles in a different location in the consist, add the vehicles as a separate entry in the list
+<td width=25>[[image:NotePad.PNG|link=]]</td>
-*Add another consist and driver by clicking the '''''<u>Add new consist</u>''''' link again</td>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
+----
+</td>
 </tr>
-</table></td>
+<tr valign="top">
+<td colspan=2>
+<table>
+<tr valign="top">
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>the first vehicle in the list will be the first vehicle produced by the portal</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>it is NOT possible to easily reorder the vehicles in a consist</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>to add more of the same vehicles in a different location in the consist, add the vehicles as a separate entry in the list</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>add another consist and driver by a <span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> on the '''<span style="text-decoration: underline;">Add new consist</span>''' ; again</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
 <br>
 ==='''Add a Saved Consist'''===
-If you have already saved your consists in TANE using the '''Trainz Tool''' then those consists can be quickly and easily added to the portal consist list.
+If you have already saved your consists in Trainz using the '''Trainz Tool''' then those consists can be quickly and easily added to the portal consist list.
 <br>
 <table>
 <tr valign="top">
-<td>[[file:PortalExitingConsist.PNG]]</td>
+<td>[[image:PortalExitingConsist.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#ffffff>
-<tr>
+<table bgcolor=#000000 cellpadding=2>
-<td colspan="2">
+<tr valign="top">
-----</td>
+<td>
+<table bgcolor=#ffffff cellpadding=2>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 17px;">Steps:</span> To add a saved consist to a portal:-</td>
 </tr>
 <tr valign="top">
-<td>[[file:Steps.PNG]]</td>
+<td width=25>[[image:DotPoint1.JPG|link=]]</td>
-<td><font size="3">'''Steps:'''</font><br>
+<td>Scroll through the list to find the saved consist</td>
-#Scroll through the list to find the saved consist
-#Select the consist, then either:-
-:*Click the [[file:Tick.PNG]] icon to accept the selection and load it into the portal consist list, or
-:*Click the [[file:Cross.PNG]] icon to reject the selection and return to the previous screen</td>
 </tr>
-<tr>
+<tr valign="top">
-<td colspan="2">
+<td>[[image:DotPoint2.JPG|link=]]</td>
-----</td>
+<td>Select the consist, then either:-
+<table>
+<tr valign="top">
+<td width=25>[[image:Ablue.png|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> the [[image:Tick.PNG|link=]] icon to accept the selection and load it into the portal consist list, <span style="font-weight: 700; font-size: 15px;">OR</span></td>
 </tr>
-</table></td>
+<tr valign="top">
+<td>[[image:Bblue.png|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Left Click&#160;</span> the [[image:Cross.PNG|link=]] icon to reject the selection and return to the previous screen</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 202: / Line 541: @@
 <table>
 <tr valign="top">
-<td>[[file:PortalProperties03.PNG]]</td>
+<td>[[image:PortalProperties03.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#eeeeee>
+<table cellpadding=4 bgcolor=#eeeeee>
 <tr>
 <td colspan="2">
@@ Line 210: / Line 549: @@
 </tr>
 <tr valign="top">
-<td>[[file:Gears.PNG]]</td>
+<td>[[image:Gears.PNG|link=]]</td>
-<td><font size="3">'''Settings:'''</font><br>
+<td><span style="font-size: 17px;">'''Settings:'''</span><br>
 You can:-
-*Select a new driver and icon
+<table>
-*Rename the driver
+<tr valign="top">
-*Add driver commands
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
-*Delete the driver</td>
+<td>Select a new driver and icon</td>
 </tr>
 <tr valign="top">
-<td colspan="2">
+<td>[[image:BlackDot10x10.png|link=]]</td>
-----</td>
+<td>Rename the driver</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>Add driver commands</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>Delete the driver</td>
 </tr>
 </table>
-<table cellpadding="4" bgcolor=#ffffb0>
+</td>
+</tr>
 <tr valign="top">
-<td>[[file:NotePad.PNG]]</td>
+<td colspan="2">
-<td><font size="3">'''Notes:'''</font><br>
+----</td>
-For information on adding driver commands see the Trainz Wiki Page [[file:WikiLink.PNG]] '''[[How to Use Driver Setup Rule|Driver Setup Rule]]'''</td>
 </tr>
 </table></td>
 </tr>
 </table>
-<br>
-==Consume Trains==
+<table cellpadding=4 bgcolor="Aquamarine">
+<tr valign="top">
+<td>[[image:LinkWiki.PNG|link=]]</td>
+<td>
+For information on adding driver commands see the '''Trainz Wiki Page''' at:-
+* '''[[How to Use Driver Setup Rule|Driver Setup Rule]]'''</td>
+</tr>
+</table>
+<br>
+=='''Consume Trains'''==
 To remove trains from the Session<br>
 <table>
 <tr valign="top">
-<td>[[file:PortalAcceptAllTrains.PNG]]</td>
+<td>[[image:PortalAcceptAllTrains.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#ffffff>
+<table cellpadding=4 bgcolor=#ffffff>
 <tr>
 <td colspan="2">
@@ Line 246: / Line 601: @@
 </tr>
 <tr valign="top">
-<td>[[file:Choices.PNG]]</td>
+<td>[[image:Choices.PNG|link=]]</td>
-<td><font size="3">'''Choices:'''</font><br>
+<td><span style="font-size: 17px;">'''Choices:'''</span><br>
-*[[file:CheckBox.PNG]] '''Consume trains''' then either
+[[image:CheckBox.PNG|link=]] '''Consume trains''' then either
-**Select the option '''Accept all trains''' to remove any and all trains that enter the portal, or
+:[[image:PortalOptionButtonEmpty.PNG|link=]] '''Accept all trains''' to remove any and all trains that enter the portal, <span style="font-weight: 700; font-size: 15px;">OR</span>
-**Select the option '''Accept trains matching specific criteria''' to only remove certain trains that enter the portal</td>
+:[[image:PortalOptionButtonEmpty.PNG|link=]] '''Accept trains matching specific criteria''' to only remove certain trains that enter the portal</td>
 </tr>
 <tr>
@@ Line 256: / Line 611: @@
 ----</td>
 </tr>
-</table></td>
+</table>
+</td>
 </tr>
 </table>
-<table cellpadding="4" bgcolor=#ffffb0>
+<table bgcolor=#000000 width=800>
 <tr valign="top">
-<td>[[file:PencilTips.PNG]]</td>
+<td>
-<td>For "dead end" portals (those that have no exit) the '''Accept all trains''' option is the option that ''should'' be used</td>
+<table bgcolor=#ffffe0 width=796>
+<tr valign="top">
+<td>[[image:PencilTips.PNG|link=]]</td>
+<td>For "dead end" portals (those that have no exit) the '''Accept all trains''' option is the option that ''should'' be used
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 268: / Line 631: @@
 ==='''Consume Only Specific Trains'''===
 After selecting the option '''Accept trains matching specific criteria''' a new set of controls will appear<br>
-<table>
+<table width=1000>
 <tr valign="top">
-<td>[[file:PortalAcceptAllTrainsOpen.PNG]]</td>
+<td>[[image:PortalAcceptAllTrainsOpen.PNG|link=]]</td>
 <td>
-<table cellpadding="4" bgcolor=#eeeeee>
+<table cellpadding=4 bgcolor=#eeeeee>
 <tr>
 <td colspan="2">
@@ Line 278: / Line 641: @@
 </tr>
 <tr valign="top">
-<td>[[file:Gears.PNG]]</td>
+<td>[[image:Gears.PNG|link=]]</td>
-<td><font size="3">'''Settings:'''</font><br>
+<td><span style="font-size: 17px;">'''Settings:'''</span><br>
-*You can set any one, any two or all three of the '''consist selection criteria'''
+[[image:PortalOptionButtonFilled.PNG|link=]] '''Accept trains matching specific criteria'''
-*Any train that matches the entered settings will be removed from the Session as it enters the portal, other trains will be ignored
+<table>
-<br>
+<tr valign="top">
-'''Specific Vehicles''' - normally used to specify just ''one'' particular train in the Session
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
-*You must select, from the Session list, the '''exact name''' given to a vehicle. This is the name that has been entered into the property window of that vehicle
+<td>You can set any one, any two or all three of the '''consist selection criteria'''</td>
-*The order of the vehicles, if there is more than one, is not important
+</tr>
-*You only need to select enough names to correctly identify the consist that contains the vehicle or vehicles (the locomotive name is ''usually'' sufficient)
+<tr valign="top">
-<br>
+<td>[[image:BlackDot10x10.png|link=]]</td>
-'''Vehicles Types''' - normally used to specify a number of different trains in the session e.g. all trains with a particular type of coal wagon
+<td>Any train that matches the entered settings will be removed from the Session as it enters the portal, other trains will be ignored</td>
-*You must select, from the Session list, the '''general name''' of the type of vehicle or vehicles - this is the name shown in the Trains Tool when the vehicle is added to a layout
+</tr>
-*If you have identified '''Specific Vehicles''' (above) then you would normally not need to set this option
+</table>
-<br>
+<span style="font-weight: 700; font-size: 15px;">Control Options:-</span>
-'''Drivers''' - used to specify trains driven by particular drivers
+<table>
-*Select the driver or drivers from the Session driver list
+<tr valign="top">
-*If your drivers change trains or consists during a Session then it ''may'' be useful to combine this with one of the other two options
+<td width=10>[[image:DotPointBlack.JPG|10px|link=]]</td>
+<td>'''Specific Vehicles''' - normally used to specify just ''one'' particular train in the Session
+<table>
+<tr valign="top">
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
+<td>You must select, from the Session list, the '''exact name''' given to a vehicle. This is the name that has been entered into the property window of that vehicle</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>The order of the vehicles, if there is more than one, is not important</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>You only need to select enough names to correctly identify the consist that contains the vehicle or vehicles (the locomotive name is ''usually'' sufficient)</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<table>
+<tr valign="top">
+<td width=10>[[image:DotPointBlack.JPG|10px|link=]]</td>
+<td>'''Vehicles Types''' - normally used to specify a number of different trains in the session e.g. all trains with a particular type of coal wagon
+<table>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>You must select, from the Session list, the '''general name''' of the type of vehicle or vehicles - this is the name shown in the Trains Tool when the vehicle is added to a layout</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>If you have identified '''Specific Vehicles''' (above) then you would normally not need to set this option</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<table>
+<tr valign="top">
+<td width=10>[[image:DotPointBlack.JPG|10px|link=]]</td>
+<td>'''Drivers''' - used to specify trains driven by particular drivers
+<table>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>Select the driver or drivers from the Session driver list</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>If your drivers change trains or consists during a Session then it '''may''' be useful to combine this with one of the other two options</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
 </td>
 </tr>
@@ Line 301: / Line 718: @@
 ----</td>
 </tr>
-</table></td>
+</table>
+</td>
 </tr>
 </table>
 <br>
-An example:-
+'''An example:-'''
+<table width=1000>
+<tr valign="top">
+<td>[[image:PortalAcceptAllTrainsSpecifics.PNG|link=]]</td>
+<td>
+<table bgcolor=#000000 width=500>
+<tr valign="top">
+<td>
+<table bgcolor=#ffffb0 width=496>
+<tr valign="top">
+<td>[[image:NotePad.PNG|link=]]</td>
+<td><span style="font-size: 17px;">'''Notes:'''</span><br>
+----
+In this example, the portal will remove ''any'' train that:-
 <table>
 <tr valign="top">
-<td>[[file:PortalAcceptAllTrainsSpecifics.PNG]]</td>
+<td width=10>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>contains locomotive '''BR HST 125''' with the running number '''253007'''</td>
+</tr>
+<tr valign="top">
+<td colspan=2><span style="font-weight: 700; font-size: 15px;">OR</span> has ''any of'' the following vehicles:-</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>'''BR HST MK3 TF''' with ''any'' running numbers</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>'''BR HST MK3 TRUK''' with ''any'' running numbers</td>
+</tr>
+<tr valign="top">
+<td colspan=2>
+<span style="font-weight: 700; font-size: 15px;">OR</span> is driven by ''any of'' the following drivers:-</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>'''Alan'''</td>
+</tr>
+<tr valign="top">
+<td>[[image:DotPoint.JPG|10px|link=]]</td>
+<td>'''Andrea'''</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+</td>
 </tr>
 </table>
@@ Line 314: / Line 778: @@
 ==='''Return Consumed Trains'''===
+<table width=1000 bgcolor="lightcyan" cellpadding=2>
+<tr valign="top">
+<td width=10>[[image:BlueDot10x10.png|link=]]</td>
+<td>A train that has been returned after entering a portal will return to the Session with any remaining driver commands still in its Driver Schedule. It will then immediately start obeying those commands</td>
+</tr>
+</table>
+<br>
 To return consumed trains back into the Session<br>
-<table>
+<table width=1000>
 <tr valign="top">
-<td>[[file:PortalAcceptTrainReturns.PNG]]<br><br>
+<td>[[image:PortalAcceptTrainReturns.PNG|link=]]<br><br>
-<table cellpadding="4" bgcolor=#eeeeee>
+<table cellpadding=4 bgcolor=#eeeeee>
 <tr>
 <td colspan="2">
@@ Line 324: / Line 795: @@
 </tr>
 <tr valign="top">
-<td>[[file:Gears.PNG]]</td>
+<td>[[image:Gears.PNG|link=]]</td>
-<td><font size="3">'''Settings:'''</font><br>
+<td><span style="font-size: 17px;">'''Settings:'''</span><br>
 To return the train from a different portal:-
-#[[file:CheckBox.PNG]] '''Train returns through alternate portal''' and
+<table>
-#Enter the exact name of the alternate portal</td>
+<tr valign="top">
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
+<td>Set [[image:CheckBox.PNG|link=]] '''Train returns through alternate portal''', and</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td>Enter the exact name of the alternate portal</td>
+</tr>
+</table>
+</td>
 </tr>
 <tr valign="top">
@@ Line 336: / Line 816: @@
 </table></td>
 <td>
-<table cellpadding="4" bgcolor=#eeeeee>
+<table cellpadding=4 bgcolor=#eeeeee>
 <tr>
 <td colspan="2">
@@ Line 342: / Line 822: @@
 </tr>
 <tr valign="top">
-<td>[[file:Gears.PNG]]</td>
+<td>[[image:Gears.PNG|link=]]</td>
-<td><font size="3">'''Settings:'''</font><br>
+<td><span style="font-size: 17px;">'''Settings:'''</span>
-#[[file:CheckBox.PNG]] '''Train returns after ...'''
+<table>
-#Set the time delay (in '''real minutes''') between the train being consumed and produced, then select '''one option''' from:-</td>
+<tr valign="top">
+<td width=10>[[image:BlackDot10x10.png|link=]]</td>
+<td>Set [[image:CheckBox.PNG|link=]] '''Train returns after ...''' and</td>
+</tr>
+<tr valign="top">
+<td>[[image:BlackDot10x10.png|link=]]</td>
+<td><span style="font-weight: 700; font-size: 15px; background-color: lightcyan;">&#160;Double Left Click&#160;</span> on '''<u>5 real minutes</u>''' to set the time delay (in '''real minutes''', not '''Trainz Clock minutes''') between the train being consumed and produced, then select '''one option''' from:-</td>
 </tr>
 </table>
-<table cellpadding="4" bgcolor=#ffffff>
+</td>
+</tr>
+</table>
+<table cellpadding=4 bgcolor=#ffffff>
 <tr valign="top">
-<td>[[file:Choices.PNG]]</td>
+<td>[[image:Choices.PNG|link=]]</td>
-<td><font size="3">'''Choices:'''</font><br>
+<td><span style="font-size: 17px;">'''Choices:'''</span><br>
-:*'''Train is not loaded or unloaded''' - no changes will be made to the loads carried in each vehicle
+:[[image:PortalOptionButtonEmpty.PNG|link=]] '''Train is not loaded or unloaded''' - no changes will be made to the loads carried in each vehicle
-:*'''Train is loaded only''' - each vehicle will be loaded when it exits the portal
+:[[image:PortalOptionButtonEmpty.PNG|link=]] '''Train is loaded only''' - each vehicle will be loaded when it exits the portal
-:*'''Train is unloaded only''' - each vehicle will be unloaded when it exits the portal
+:[[image:PortalOptionButtonEmpty.PNG|link=]] '''Train is unloaded only''' - each vehicle will be unloaded when it exits the portal
-:*'''Empty trains are loaded, other trains are unloaded''' - vehicles that are empty when entering the portal will be loaded when they exit the portal, all other vehicles will be unloaded</td>
+:[[image:PortalOptionButtonEmpty.PNG|link=]] '''Empty trains are loaded, other trains are unloaded''' - vehicles that are empty when entering the portal will be loaded when they exit the portal, all other vehicles will be unloaded</td>
 </tr>
 <tr>
@@ Line 365: / Line 854: @@
 </table>
 <br>
+<table bgcolor="red" width=900>
+<tr valign="top">
+<td>
+<table bgcolor=#fcbcbc width=896>
+<tr valign="top">
+<td>[[image:Stop.PNG|link=]]</td>
+<td>
+If the driver command that sent a train to the consuming portal was the '''final command''' in its schedule, then it will emerge from the portal with an '''empty Driver Schedule'''. It will come to a halt immediately after leaving the portal.
+</td>
+</tr>
+</table>
+</td>
+</tr>
+</table>
+<br>
+<table>						<!-- BEGIN Nav Buttons Table -->
+<tr valign="top">
+<td width=729><span id="stepEnhanced"></span>&nbsp;</td>
+<td width=46>[[image:BackToTop.png|link=#top|alt=Top|Top]]</td>
+<td width=75>[[image:NextUp.png|link=#stepConfiguring|alt=Next Up|Top]]</td>
+<td width=75>&nbsp;</td>
+<td width=75>[[image:BackToBottom.png|link=#bottom|alt=Bottom|Bottom]]</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 ='''Configuring an Enhanced Portal'''=
-There are a number of portals available on the DLS that have additional features or capabilities that are not found in the basic portals built into TANE. There are also Session Rules available on the DLS that will give additional features or capabilities to the basic portals.
+<table width=1000>
+<tr valign="top">
+<td>There are a number of portals available on the DLS that have additional features or capabilities that are not found in the basic portals built into Trainz. There are also Session Rules available on the DLS that will give additional features or capabilities to the basic portals.</td>
+</tr>
+</table>
 =='''Quick Portal Manager Standard Edition Rule (SP2 and later)'''==
-This is a Session Rule, by '''pguy''', that manages the portals and adds flexible timetables to their operations. It is available on the DLS.
+<table width=1000>
+<tr valign="top">
+<td>This is a Session Rule, by '''pguy''', that manages the portals and adds flexible timetables to their operations. It is available on the DLS.
-*'''<kuid2:61392:5011:45>''' - correct at the time this document was written
+*'''&lt;kuid2:61392:5011:45&gt;''' - correct at the time this document was written</td>
+</tr>
+</table>
-'''This is still a work in progress - more to come'''
+='''Portals and the UDS (Unified Driver Surveyor) Interface'''=
+<table width=1000>
+<tr valign="top">
+<td>The '''UDS''' is an option for rapid switching, in both directions, between '''Driver''' and '''Surveyor'''. It is available in '''TRS19 Platinum Edition''' and later versions of '''Trainz'''. The '''UDS''' does not affect the operation of portals but it has revealed one previously unnoticed property of portals.<br>
+A train that is driven into a portal and later returned to the layout will be returned in the same layer as the portal and not in the trains originally assigned layer. Trains that are produced by a portal will be assigned to the same layer as the portal. This has <span style="background-color: yellow; font-weight: 700;">&nbsp;possibly always been the case with portals&nbsp;</span> but was probably unnoticed until the arrival of the '''UDS'''. It seems to have no other noticeable effect on trains.<br>
+This could become an issue if you make the switch from '''Driver''' to '''Surveyor''' after a train has been '''returned''' to the layout from a portal. For example, if a train is originally in a '''Session Layer''' then it is part of a '''Session'''. If it is returned from a portal then it will now be in a '''Route Layer''' and will be part of the '''Route'''. If you then switch from '''Driver''' to '''Surveyor''' and save the '''Route''' then the train will be saved in the '''Route''' not in the '''Session'''. If this is an issue then the remedy is to open the property dialogue window of any wagon in the train after it has left the portal and change its assigned layer to the correct one. This will set all vehicles in that train to the same correct layer.</td>
+</tr>
+</table>
 <br>
+<table>						<!-- BEGIN Nav Buttons Table -->
+<tr valign="top">
+<td width=729><span id="bottom"></span>&nbsp;</td>
+<td width=46>[[image:BackToTop.png|link=#top|alt=Top|Top]]</td>
+<td width=75>[[image:NextUp.png|link=#stepEnhanced|alt=Next Up|Top]]</td>
+<td width=75>&nbsp;</td>
+<td width=75>&nbsp;</td>
+</tr>
+</table>								<!-- END Nav Buttons Table -->
 ----
 ----
-<br>
 ='''Trainz Wiki'''=
-<table cellpadding="4" bgcolor=#ffffff>
+<table cellpadding=4 bgcolor=#ffffff>
 <tr valign="top">
-<td>[[file:TrainzWiki.png]]</td>
+<td>[[image:TrainzWiki.png|link=]]</td>
 <td>
-<font size="3">'''More Tutorials and Guides to Using Trainz'''</font><br>
+<span style="font-size: 17px;">'''More Tutorials and Guides to Using Trainz'''</span><br>
-*'''<span class="plainlinks">[http://online.ts2009.com/mediaWiki/index.php/HowTo How to Guides]</span>'''
+*'''<span class="plain;s">[http://online.ts2009.com/mediaWiki/index.php/HowTo How to Guides]</span>'''
+*'''[[Driver Commands List]]'''
 *'''[[Session Rule List with Parameters|Session Rules List (Alphabetical) with Parameters]]'''
 *'''[[Session Rules By Categories With Properties|Session Rules List (Categories) With Parameters]]'''
@@ Line 394: / Line 934: @@
 </tr>
 </table>
+----
+This page was created by Trainz user '''<span class="plain;s">[http://online.ts2009.com/mediaWiki/index.php/User:Pware pware]</span>''' in July 2018 and was last updated as shown below.
+----
+[[Category:How-to guides]]