SAR Scenario Orroroo Grain

• SAR T 23 on Peterborough Depot  Siding 1 
• SAR T 233 on Peterborough Depot  Loco Road 1 
• SAR 407 on Peterborough Depot  Repair Shop Road 4 

1. If you have already closed the opening message window then the first step is to pause the session by pressing the  P  key.
2. Next locate your loco. Either:-
   1. Open the Finder Tool (press  Ctrl   F ) and type, in the Name field, the name of the loco. For example SAR T 23 (or just T 23 should be enough). Click the tick icon, OR
   2. Open the Driver List (bottom left of the screen) and select the loco from there - click the drivers Eye icon to jump to the loco.
3. Take a few moments to get your bearings. Click (this link will open in this window) to show the location details and track plans for Peterborough. In each location details page:-
   • the  tab gives an overall summary of each location with a "potted" history (where available).
   • the  tab reveals the invisible  Track Marks for Drive To commands.
   • the  tab lists all active industries and their commodities.
   • the  tab describes the names, locations and settings of all junction switches as well as some switch sets you may want to use.
4. Each location details page has direct links to the adjacent locations so you can explore along the route.
5. When you are ready to start, reload the Peterborough Base Session page (click the Scenarios button on your current location page) and select this Scenario again or just use the Back button on your browser - whichever is quicker.
6. Switch back to TRS19 Driver and either close the opening message window or press the  P  key to start the session.

 Tasks: 

1. Move your selected loco onto the Peterborough  Grain & Flour Mill Siding and couple to the WHE wagons stored there.
2. Move the train onto the  Main  Line and then onto the Peterborough-Quorn Line. Proceed to Orroroo.
3. At Orroroo move the train onto the  Goods  road to the  Grain Silos  for loading. Notes:
   • stop the WHE wagons and DB van so that they are clear of the  Goods Crane .
   • the WHE wagons are not industry enabled and will not actually load but because they are covered this issue will not be noticeable.
4. Run the loco around the train to attach to the DB guard van at its rear.
5. Detach the DB van from the WHE wagons and shunt the van onto the  Goods Loop . Position it alongside the Goods Shed.
6. Turn the loco on the  WYE . Notes:
   • The  WYE  was actually removed in the 1930s so in reality the loco would have to run "tender first" back to Peterborough - which was not popular with the train crews but is an option you can use.
   • If you have selected the Garrett Loco SAR 407 for this scenario then it will be too long to turn on the  WYE .
7. Coal and water (if needed) at the Orroroo  Loco Coal & Water  Stage.
8. Attach the loco to the southern (Peterborough) end of the WHE wagons at the  Grain Silos .
9. Shunt the train onto the  Goods Loop  and couple it to the DB van.
10. Proceed to a vacant yard road at Peterborough.
11. Run the loco around the train and attach to the DB van at its rear.
12. Shunt the DB van onto a vacant road in the Car Shed.
13. Reattach to the WHE wagons and shunt the train to the Peterborough  Grain & Flour Mill  Siding.
14. Detach the loco and return it to the Main  Loco  Depot.