CDE Directional Speed Retarder V2

Latest revision as of 00:49, 6 August 2021

CDE Directional Speed Retarder
<KUID:647907:100950>
Last Updated: 26th Jun 2021
File Size: 58.7 kb
TANE

Directional Speed Retarder V2 revised with permission from trev999 to CDE Trainz.

Directional Speed Retarder version 2.0 adjusts the speed of a vehicle moving in the direction of the arrow. Used when fly shunting and in humpyards. Measurement is in meters per second. The exit speed of the vehicles can be adjusted in Surveyor to a very fine degree. Settings can be changed in-session by using CDE DSR Remote Control (available soon) driver command.

REMOTE CONTROL: Groups of retarders that have the same base name are controlled simultaneously. A group is formed by naming the retarders with a common base name and an extension separated by a space. The base name must begin with DSR_

Example:

• DSR_A 1
• DSR_A 2

or

• DSR_1 1
• DSR_1 2

etc.

Options for changing speed settings range from -1 to +8 meters/sec and 50% increase or 25% decrease. The current setting of retarders in the group can also be viewed in the message overlay and Dev Log file.

trev999's remake of boat's Directional Trigger, inspired by Lars Humpyard Kit.

This asset is free to use for personal use. You may modify this and redistribute it, only if it is free of charge and the all the creators are mentioned. Any commercial use is prohibited unless express written permission is granted through CDE Trainz.

More info and images for CDE Directional Speed Retarder can be found on CDETrainz.com;
CDE Trainz Website - USA