Help:TRS19 Driver Buttons Panel
m |
|||
| Line 2: | Line 2: | ||
[[File:Driver-ui-control-buttons-toggle.JPG|Driver UI Buttons Panel]] | [[File:Driver-ui-control-buttons-toggle.JPG|Driver UI Buttons Panel]] | ||
The Buttons Panel provides a selection of buttons for driving your train. Different buttons will be available to use depending on the train you are driving; these buttons are available in all UI modes. | The Buttons Panel provides a selection of buttons for driving your train. Different buttons will be available to use depending on the train you are driving; these buttons are available in all UI modes. | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-decouple.jpg]] Decouple (CTRL + D)=== | ||
| + | To decouple two vehicles, select the Decouple tool and then click on the red couplers that appear between the two vehicles. | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-headlight.jpg]] Headlights (L)=== | ||
| + | Toggles the headlight between the 'Off', 'Dim', and 'Fully On' positions. Pressing L on your keyboard will toggle the headlight between on and off settings. Pressing Shift + L will toggle dim mode on and off (note, if the headlight is off, Shift + L will not turn the headlight on). | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-ditchlights.jpg]] Ditchlights (;)=== | ||
| + | Will start ditch lights flashing. Will only function on locomotives setup to support the built-in flashing ditchlight system. Ditchlights will only function if the headlight is in the 'dim' or 'fully on' modes. | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-horn.jpg]] Horn (H)=== | ||
| + | Blows the horn of the lead locomotive. | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-bell.jpg]] Bell (B)=== | ||
| + | Turns the bell on and off. Not all locomotives may have a bell sound, or may have an alternate horn/whistle sound configured on the bell function. | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-heading.jpg]] Change Cab (ALT + C) or Reverse Train Heading === | ||
| + | On locomotives configured with 2 cabs (or with a 'rear facing' cab interior view) this will toggle between the front and rear cabs. | ||
| + | |||
| + | On locomotives configured with only 1 cab or cab interior view, this will toggle the train's 'heading'. | ||
| + | |||
| + | In both cases this will make the headlight, and reverser (realistic controls) or DCC dial direction (simple controls) change directions. This is the same as when an AI train changes direction. | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-pantograph.jpg]] Pantograph (End) === | ||
| + | Will raise or lower the pantographs on the train. If only fitted with 1 pantograph, it will simply raise and lower this pantograph. If fitted with 2 pantographs it will toggle each pantograph's position for each click/key press in the following sequence: | ||
| + | |||
| + | #Will raise the front pantograph | ||
| + | #Will raise the rear pantograph | ||
| + | #Will then lower the front pantograph | ||
| + | #Will then lower the rear pantograph | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-sander.jpg]] Sander (V)=== | ||
| + | Will turn the sander on or off when in Realistic Controls. The sander is used to apply sand to the rails to help provide adhesion when you experience wheelslip. | ||
| + | |||
| + | ===[[File:Driver-ui-control-buttons-toggle.jpg]] Toggle Buttons Panel=== | ||
| + | Will hide or unhide the Buttons panel. | ||
| + | |||
| + | ===Driver UI Mode=== | ||
| + | [[File:Driver-ui-hud-mode-buttons.JPG|Driver UI Mode]] | ||
| + | |||
| + | The Driver UI Mode buttons allow you to select if you are driving with [[#Simple Controls|Simple Controls]] or [[#Realistic Controls|Realistic Controls]], and to access the [[#Command Bar|AI Command Bar]]. | ||
| + | |||
| + | ===Driver UI Underlay Toggle=== | ||
| + | [[File:Driver-ui-interface-underlay-button.JPG|Driver UI Underlay Toggle]] | ||
| + | The Driver UI Underlay Toggle will turn a shaded underlay for the new Driver UI on or off. This may help provide some extra contrast to the UI in some situations. | ||
| + | |||
| + | Return to [[TRS19 | TRS19 Home Page]] - [[Help:TRS19_Driver_UI|TRS2019 Driver UI]] - [[Help:TRS19|TRS19 Help]] | ||
| + | [[Category:TRS19]] | ||
Revision as of 14:32, 23 July 2018
Contents |
Driver UI Buttons Panel
The Buttons Panel provides a selection of buttons for driving your train. Different buttons will be available to use depending on the train you are driving; these buttons are available in all UI modes.
Decouple (CTRL + D)
To decouple two vehicles, select the Decouple tool and then click on the red couplers that appear between the two vehicles.
Headlights (L)
Toggles the headlight between the 'Off', 'Dim', and 'Fully On' positions. Pressing L on your keyboard will toggle the headlight between on and off settings. Pressing Shift + L will toggle dim mode on and off (note, if the headlight is off, Shift + L will not turn the headlight on).
Ditchlights (;)
Will start ditch lights flashing. Will only function on locomotives setup to support the built-in flashing ditchlight system. Ditchlights will only function if the headlight is in the 'dim' or 'fully on' modes.
Horn (H)
Blows the horn of the lead locomotive.
Bell (B)
Turns the bell on and off. Not all locomotives may have a bell sound, or may have an alternate horn/whistle sound configured on the bell function.
Change Cab (ALT + C) or Reverse Train Heading
On locomotives configured with 2 cabs (or with a 'rear facing' cab interior view) this will toggle between the front and rear cabs.
On locomotives configured with only 1 cab or cab interior view, this will toggle the train's 'heading'.
In both cases this will make the headlight, and reverser (realistic controls) or DCC dial direction (simple controls) change directions. This is the same as when an AI train changes direction.
Pantograph (End)
Will raise or lower the pantographs on the train. If only fitted with 1 pantograph, it will simply raise and lower this pantograph. If fitted with 2 pantographs it will toggle each pantograph's position for each click/key press in the following sequence:
- Will raise the front pantograph
- Will raise the rear pantograph
- Will then lower the front pantograph
- Will then lower the rear pantograph
Sander (V)
Will turn the sander on or off when in Realistic Controls. The sander is used to apply sand to the rails to help provide adhesion when you experience wheelslip.
Toggle Buttons Panel
Will hide or unhide the Buttons panel.
Driver UI Mode
The Driver UI Mode buttons allow you to select if you are driving with Simple Controls or Realistic Controls, and to access the AI Command Bar.
Driver UI Underlay Toggle
The Driver UI Underlay Toggle will turn a shaded underlay for the new Driver UI on or off. This may help provide some extra contrast to the UI in some situations.
Return to TRS19 Home Page - TRS2019 Driver UI - TRS19 Help
