Session Rule List with Parameters

Revision as of 14:26, 25 April 2018

TRAINZ A New Era SP2. List of Trainz Session Rules in Alphabetical Order with Properties. All rules are the Copyright of N3V Games

This page is always under construction. As new rules appear they will be added to this list.

Also available Session Rules By Categories With Properties

<KUID numbers> are for the current versions of each rule at the time of writing. These numbers can change as rules are updated.

Rules identified as a DLS Rule must be downloaded and installed from the DLS.

Rules identified as a Base Rule or a Built-in Rule are installed with TANE.

Rules identified as a Parent Rule will return a true or false result. A true result will execute any following indented child rules.

A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

A, B

Achievement Check Rule

Executes child rules when achievement conditions have been met

<kuid:401543:1190>

Built-in Rule

Parent Rule

Properties:
   <Not configured, click here to select an achievement asset> - click to select an Achievement Asset from those installed
      When an Achievement Asset has been selected, the following will appear:-
      Achievement KUID: <selected asset name> - click to change the selected Achievement Asset
      Achievement name: <not set> - click to select the achievement name from the selected asset
      Trigger if achievement: <select> - choose one of:-
         has been gained - the rule will be triggered when this achievement has been gained
         has not been gained - the rule will be triggered when this achievement has NOT been gained

Advanced Industry Load Configuration Rule

Locks train controls when loading/unloading at an industry, overrides time settings for begin load and begin unload operations

<kuid:30501:100007>

Base Rule

Properties:
   Target object <select> - select industry object from session list
   [Check Box] Lock the train's controls during a stopped load/unload operation - check to disable driver controls while train is stopped and loading/unloading
   [Check Box] Override 'begin load' and 'begin unload' durations to <value> seconds - if checked enter number of seconds to override

Note: Times are Trainz clock time, not real time

AI Start Rule

Restarts all halted AI controlled trains. Drivers will continue with the commands in their driver command list.

<kuid2:400048:100981:1> DLS Rule by callavsg

Properties:
   None

Related Rules:
   AI Stop Rule - halts all AI drivers
   Disallow AI Rule - cancels all AI driver commands

AI Stop Rule

Halts all AI controlled trains but does not delete their driver commands. AI trains can be restarted with the AI Start Rule or by issuing individual Continue Schedule commands.

<kuid2:400048:100980:1> DLS Rule by callavsg

Properties:
   None

Related Rules:
   AI Start Rule - restarts all halted AI drivers
   Disallow AI Rule - cancels all AI driver commands

ATP Speed Limiter Rule

Limits allowable speed over set limit

<kuid2:321959:1000:1>

Built-in Rule

Properties:
   Limits the speed to <value> mph over the set limit - enter speed value in mph

AWS Configuration Rule

This rule configures the Trainz implementation of the Automatic Warning System when approaching signals

<kuid2:60850:89002:3>

Built-in Rule

Properties:
   Select one of three option buttons:-
      ( ) Active
      ( ) Passive
      ( ) Passive with HUD hidden
   [Check Box] Simulate AWS for unfitted cabs?
   [Check Box] Use modern sound set for unfitted cabs?

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

C

Cinematic Camera Rule

Provides several different cinematic style cameras with animations. Best used at the start of a session. Use the Trackside Camera (tracking view) found in the Set Camera Rule during session play.

<kuid2:401543:1166:3>

Built-in Rule

Properties:
   [Check Box] Lock camera controls for the duration - if checked user cannot alter camera view
   [Check Box] Prevent train control for duration - if checked user cannot control train
   Camera target: <click to select> - click to select the object from the session list that will be the camera target
   Camera mode: - select one of three option buttons:-
      ( ) Stationary
      ( ) Circle targeted object
      ( ) Move from one point to another (zoom, pan, etc)
   Initial camera values:
      [Check Box] Pitch: <value> - check to select then click value to enter a pitch value
      [Check Box] Yaw:   <value> - check to select then click value to enter a yaw value
      [Check Box] Zoom:  <value> - check to select then click value to enter a zoom value
   Total time to animate:  <value> - enter an animation time in seconds

Note: Times are Trainz clock times, not real times

Related Rules:
   Focus Camera Rule - sets the initial camera view and starting vehicle for a session
   Set Camera Rule - sets the target object and properties of the camera
   Wait for Camera View Mode Rule - executes child rules when the camera view is changed

Clean Up Derailed Trains Rule

Cleans up derailed train cars after a set time delay

<kuid2:60850:89003:1>

Base Rule

Properties:
   Set delay to clean up derailed traincars to
      <h>: - click to enter the number of hours (0-23) to wait
      <mm>: - click to enter the number of minutes (0-59) to wait
      <ss>: - click to enter the number of seconds (0-59) to wait

Note: Time is Trainz clock time, not real time.

Related Rules:
   Replace Missing Vehicles Rule - creates a replacement train after a derailment
   Wait for Derailment Rule - executes child rules when a derailment occurs

Clock Rule

Rule needed for animated clocks.

<kuid2:62310:30041:2>

Built-in Rule

Properties:

Note: 
   Apply this rule to your session to make use of the animated clocks. See the forum for code to include in your clock object to work with this rule.

Close Message Popup Rule

Closes open message popups

<kuid:447264:1526>

Built-in Rule

Properties:
  None

Known Issues:
  This rule only appears to work if it is a child of the rule that triggered the Message Popup Rule

Related Rule:
   Message Popup Rule - displays a pop-up browser window and waits for it to be closed.

Consist Check Rule

Executes child rules when a matching consist is found. The order of the vehicles in the consists is not important.

<kuid:-25:1068>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Enforce strict exclusive testing - check to only accept an exact match with no unspecified vehicles in the consist.
      - leave unchecked to accept any consist that contains the specified vehicles. 
   Select one of two option buttons:-
   ( ) Rule disabled - select to disable the operation of this rule
   ( ) Complete whenever a train matching the description exists - When selected, enter the consist description:-
      Specific vehicle - identify the specific vehicle(s) that will trigger the rule
         + - click to add a specific vehicle from the session list
         x - click to remove the specific vehicle from the rule
      Vehicle types - identify the type of vehicle(s) that will trigger the rule
         + - click to add a type of vehicle from the session list
         x - click to remove the type of vehicle from the rule
      Drivers - identify the driver(s) that will trigger the rule
         + - click to add a driver from the session list
         x - click to remove a driver from the rule

Known Issues:
   This rule will continue to check all consists for a match even after it has been triggered. 
   To disable this add another copy of the rule as a child rule with the Rule disabled option selected.

ConsistDataHandler Rule

Was used by the QuickDrive Rule to place consists onto a route. Now obsolete.

<kuid:401543:1180>

Base Rule

Properties:
   None

Control Check Rule

Executes child rules if the train control method has been altered or a specific method has been selected.

<kuid:401543:1191>

Built-in Rule

Parent Rule

Properties:
 Execute child rules when: - select one of two option buttons:-
    ( ) DCC mode is Selected
    ( ) Cab mode is Selected
 Execute child rules: - select one of two option buttons:-
    ( ) Every time control method is set
    ( ) Once only

Related Rules:
   Control Type Rule - sets the control method

Control Type Rule

Sets the control method

<kuid:-16:2030>

Base Rule

Properties:
 Current control method is: <select> - click to select one of
    Easy Mode - DCC (standard keyboard and mouse) control
    Ask User - let the user decide
    Realistic Mode - Cab controls (on screen levers, throttles, buttons, etc)

Related Rules:
   Control Check Rule - executes child rules if the train control method changes

Coupler Breakage Check Rule

Executes child rules if there is a coupler breakage

<kuid2:447264:1017:1>

Built-in Rule

Parent Rule

Properties:
   None

Related Rules:
   Coupler Breakage HUD Rule - adds a coupler stress and breakage warning to the HUD
   Set Coupler Masks Rule - sets the coupling/decoupling masks on selected vehicles

Coupler Breakage HUD Rule

HUD displays warning about coupler stress and breakage

<kuid:-25:423>

Built-in Rule

Properties:
   Select one of two option buttons:-
      ( ) Show the Coupler Breakage Display
      ( ) Hide the Coupler Breakage Display

Related Rules:
   Coupler Breakage Check Rule - executes child rules if a coupler breaks
   Set Coupler Masks Rule - sets the coupling/decoupling masks on selected vehicles

Custom Script Rule

No description

<kuid:447264:1526>

Built-in Rule

Properties:
  None

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

D

DestSign Table Rule

Creates a list of destination names for a destination sign

<kuid2:206816:99004:2>

Built-in Rule

Properties:
  <add destination> - enter a destination name to be added to the destination sign roll
  <import destinations from texture-group> - select a list of destination names from session
  [Check Box] Enable industries/stations as destination - check to set
  [Check Box] Enable Track Marks as destinations - check to set
  [Check Box] Enable table of destinations - check to set

Disable/Enable Industry Rule

Enables/Disables vehicle load/unload for industry

<kuid2:401543:1171:1>

Built-in Rule

Properties:
  Load/unload <Disable/Enable> - click to set to Disable or Enable
  Which Industry? <select> - click to set Industry from Session List
  Which Vehicles: - select one of two option buttons:-
     ( ) Apply to every vehicle in the session
     ( ) Apply only to a specific vehicles from Session List

Disallow AI Rule

Cancels (deletes) all current and waiting AI commands for all drivers

<kuid:400048:100603>

DLS Rule by callavsg

Properties:
  None

Related Rules:
   AI Start Rule - restarts all halted AI drivers
   AI Stop Rule - halts all AI drivers

Display Custom HUD Rule

Show or hide the Custom Heads Up Display.

<kuid:-3:10206>

Base Rule

Properties:
 Show or Hide the Custom Heads up Display - select one of two option buttons:-
    ( ) Show the Custom Heads up Display
    ( ) Hide the Custom Heads up Display

Related Rules:
   Flash HUD Icon Rule - flashes a HUD panel icon for a set duration.
   mc Display Custom HUD V2 Rule (SP2 and later) - shows or hides a graphical HUD.
   Quick CustomHud Manager Rule (SP2 and later) - creates custom HUDs that can be assigned to different drivers
   Show/Hide HUD Panel Rule - shows or hides a HUD panel.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.
   Wait for Click on HUD Icon Rule - executes child rules when a HUD icon is clicked

Display HTML Pages Rule

Creates a browser to display the listed HTML files in order as a navigable sequence of pages. This rule has been superseded by the Message Popup Rule

<kuid:-25:442>

Base Rule

Properties:
   <Add Page> - adds the HTML page index.html from the selected HTML asset
      <index.html> - click to change the page name. The extension .html is optional
   <Add All> - adds all HTML pages from the session list (this appears to be disabled in TANE)
   <Delete All> - delete all HTML pages from this property list
   [Check Box] Prevent user from exiting browser until all pages viewed
   [Check Box] Disable closing of browser window by user
   [Check Box] Disable browser window scrolling
   [Check Box] Make browser window invisible
   [Check Box] Set position-Under Construction!!! - not implemented
   [Check Box] Set size-Under Construction!!! - not implemented
   Use the page <index.html> from asset <select> as the hidden button - the link buttons at the bottom of the page will be taken from the selected page in the selected HTML asset

Related Rules:
   Close Message Popup Rule - closes a displayed pop-up browser window.
   Message Popup Rule - displays a pop-up browser window and waits for it to be closed.
   Set HTML Page Rule - sets parameters for the Display HTML Pages Rule
   Timed Limited Display HTML Rule (SP2 and later) - displays a HTML page in a browser window for a set time.

Display Video Rule

Displays a page containing a video clip from a HTML asset in a browser window.

<kuid:-25:138>

Built-in Rule

Properties:
   Display page <index.html> of html asset <click to select> in a new browser window
      index.html - enter the filename of a HTML page in the selected HTML asset. The .html is optional in the filename.
      <click to select> - select the HTML asset from those installed.

Note: video must be in a valid web format.

Related Rules:
   Play Sound Rule - plays a wav sound file

Driver Command Check Rule

Executes child rules if the driver commands match a set list.

<kuid:-25:447>

Built-in Rule

Parent Rule

Properties:
 [Check Box] Trigger rule once - check to allow the rule to execute only once
 Driver character to watch the command list of <select> - select a driver name from the Session List
 Wait for driver character to have a command list that matches this:
    <add driver command> - add a driver command from the session list. More commands can be added. Commands can be deleted.
    <add all> - adds ALL driver commands in the session list. Individual commands can be removed.
    <delete all> - deletes all entered driver commands from the session rule

Related Rules:
   Driver Command Rule - specifies which commands will be available for the drivers
   Driver Schedule Rule - sets up a list of basic scheduled driver commands
   Driver Setup Rule - creates a list of drivers and assign them their orders
   Enable/Disable Driver Commands Rule - enable/disable specific driver commands on certain drivers
   Schedule Rule - allows a schedule of timed events to be applied to a train

Driver Command Rule

Specifies which commands will be available for the drivers

<kuid:-3:10057>

Base Rule

Properties::
   For each installed Driver Command:-
   [Check Box] Name of Diver Command and Description (if available) - check to make that command available to the drivers

Notes:
   Some Driver Commands that have been checked will not appear in the Command Lists for drivers if there is no target for their action. For example:
      The Wait For Trigger command will not be available to any drivers if there are no triggers set.
      The Call At command will not be available to any drivers if there are no industry active assets or passenger enabled stations.

Related Rules:
   Driver Command Check Rule - executes child rules if the driver commands match a set list
   Driver Schedule Rule - sets up a list of basic scheduled driver commands
   Driver Setup Rule - creates a list of drivers and assign them their orders
   Enable/Disable Driver Commands Rule - enable/disable specific driver commands on certain drivers
   Schedule Rule - allows a schedule of timed events to be applied to a train

Driver Main Menu Options Rule

Show/Hide the Driver Main Menu Bar

<kuid:-25:448>

Built-in Rule

Properties:
   <Show/Hide> the Driver Main Menu Bar - click Show or Hide to select

Driver Schedule Rule

Sets up a list of basic scheduled commands

<kuid2:82445:90001:9>

Built-in Rule

Properties: 
   Driver Schedule Assigned to name of driver <icon> - click icon to select a driver from those assigned in the Driver Setup Rule
   Next commands, will be executed  
      >> - click to enter driver commands from those specified in the Driver Command Rule
   Style: - select one of four option buttons:-
      ( ) Classic style: If there is a schedule do not emit a new schedule - any currently assigned set of driver commands will not be replaced
      ( ) Killer style: If there is a schedule clean it and emit a new one - replace any currently assigned driver commands with the new commands
      ( ) Cooperative style: If there is a schedule append the new one - add the new driver commands to the end of any existing commands
      ( ) Active style: Emit a new schedule, only if already a schedule running - only add the new commands if commands are currently running

Related Rules:
   Driver Command Check Rule - executes child rules if the driver commands match a set list
   Driver Command Rule - specifies which commands will be available for the drivers
   Driver Setup Rule - creates a list of drivers and assign them their orders
   Enable/Disable Driver Commands Rule - enable/disable specific driver commands on certain drivers
   Schedule Rule - allows a schedule of timed events to be applied to a train

Driver Setup Rule

Creates the list of drivers for this session and assign them their orders

<kuid:-16:2025>

Base Rule

Properties:
   <driver icon> - click to select a new driver from the list of installed and built in drivers
   <loco> - click to select a new locomotive from the session list and assign it to this driver. Locos displayed in red have not been found in the session list
   <driver name> - click to enter a new name for the selected driver
   <driver mode> - click to select one of:-
      Autodetect - the program will detect the driver mode to be used. For example, if driver commands have been entered for this driver
         then the AI driver mode will be selected
      First Human Player - the driver will wait until he/she has been selected by the player
      AI driver - the AI will be given control even if no commands are present
      Multiplayer Driver - the driver will be assigned to a multiplayer user
   <remove> - this driver will be removed from the rule
   >> - click to enter driver commands from those specified in the Driver Command Rule
    --> Scroll down to the bottom of the list of entered drivers for more options
 <Add another driver> - click to add another driver 
 [Check Box] Remove all existing Drivers first
 [Check Box] Generate new Drivers for empty Trains

 Related Rules:
   Driver Command Check Rule - executes child rules if the driver commands match a set list
   Driver Command Rule - specifies which commands will be available for the drivers
   Driver Schedule Rule - sets up a list of basic scheduled driver commands
   Enable/Disable Driver Commands Rule - enable/disable specific driver commands on certain drivers
   Schedule Rule - allows a schedule of timed events to be applied to a train

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

E, F, G

EIRS Weather Rule NE USA Rule

Customize random weather rule relative to the North East Region of the United States.

<kuid2:487222:1037:3>

Built-in Rule

Properties:
   Season <select> - select one of:-
      Summer
      Fall
      Winter
      Spring
   Random Changeability (minutes) <value> - select one of:-
      2/5/10/15/20/30/45/60 - minutes
   Environment Settings <select> - select one of:-
      Disable/Enable

Note: Minutes are Trainz clock times, not real times

Related Rules:
   Random Weather Rule v2 - randomly changes the weather according to entered parameters
   Startup Options Rule - sets the weather conditions at the start of a Session
   Weather Rule - changes the weather conditions during Session play

Enable/Disable Driver Commands Rule

Enable/Disable specific driver commands on certain drivers. Multiple copies of the rule can be used to give different drivers or consists different command lists

<kuid:-25:480>

Built-in Rule

Properties:
   <Enable/Disable> the following driver commands ... - click to select Enable or Disable
   For each driver command:-
   [Check Box] command name - check to enable or disable
   [Check Box] command name - check to enable or disable
   [Check Box] command name - check to enable or disable
   etc
   Select one of two option buttons:-
      ( ) click to accept all trains
      ( ) click to accept trains matching specific criteria
         Selecting the second option will produce the following selection controls:-
         Specific vehicle - identify the specific vehicle or set of specific vehicles that will trigger the rule
            + - click to add a specific vehicle from the session list
            x - click to remove the specific vehicle from the rule
         Vehicle types - identify the type of vehicle or a set of vehicle types that will trigger the rule
            + - click to add a type of vehicle from the session list
            x - click to remove the type of vehicle from the rule
         Drivers - identify the drivers that will trigger the rule
            + - click to add a driver from the session list
            x - click to remove a driver from the rule

Related Rules:
   Driver Command Check Rule - executes child rules if the driver commands match a set list
   Driver Command Rule - specifies which commands will be available for the drivers
   Driver Schedule Rule - sets up a list of basic scheduled driver commands
   Driver Setup Rule - creates a list of drivers and assign them their orders
   Schedule Rule - allows a schedule of timed events to be applied to a train

End Session Rule

End the Session with a fade out.

<kuid:-25:482>

Built-in Rule

Properties:
   Fade out over <value> seconds - enter number of seconds for fade out.

Note: Seconds are Trainz clock time, not real time.

Related Rules:
   Session Complete Rule - set the session to a percentage of completion

Fade In/Out Rule

Fade in or out within seconds, using specified color and opacity values.

<kuid2:190611:200000:2>

Built-in Rule

Properties:
   Red percentage:             <value> - enter the final % of red (0 = none, 100 = maximum)
   Green percentage:           <value> - enter the final % of green
   Blue percentage:            <value> - enter the final % of blue
   Alpha percentage (opacity): <value> - enter the final % of opacity (0 = invisible, 100 = solid)
   Fading duration:            <value> - enter the number of seconds required for the fade
   <help> - click to bring up help instructions

Note: Seconds are Trainz clock time, not real time.

Flash HUD Icon Rule

Flashes a HUD panel icon for a set duration of time or instructs a HUD panel icon to start/stop.

<kuid:-25:968>

Built-in Rule

Properties:
   Select one of two option buttons:-
   ( ) Flash the <click to select> icon on the <click to select> HUD panel for a period of <value> seconds
      TIP: Select the HUD panel first (the second <click to select> link).
      Available HUD panels are (select one):-
         Bottom Right Menu
         Camera Controls
         DCC Controls
         Driver Main Menu
      Available icons will depend on the HUD panel selected.
   ( ) <Start/Stop> flashing the <click to select> icon on the <click to select> HUD panel
      TIP: Select the HUD panel first (the second <click to select> link).
      Available HUD panels are (select one):-
         Bottom Right Menu
         Camera Controls
         DCC Controls
         Driver Main Menu
      Available icons will depend on the HUD panel selected.

Related Rules:
   Display Custom HUD Rule - shows or hides the Custom Heads Up Display.
   mc Display Custom HUD V2 Rule (SP2 and later) - shows or hides a graphical HUD.
   Quick CustomHud Manager Rule (SP2 and later) - creates custom HUDs that can be assigned to different drivers
   Show/Hide HUD Panel Rule - shows or hides a HUD panel.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.
   Wait for Click on HUD Icon Rule - executes child rules when a HUD icon is clicked

Focus Camera Rule

Sets the initial camera view and starting vehicle for a session.

<kuid2:122381:10014:1>

DLS Rule by mizi

Properties:
   Focus camera to: - select one of two option buttons
      ( ) Map object
      ( ) Vehicle
   Named <?????> - enter name of object or vehicle from session list
   Additionally:
      [Check Box] set view mode to - check to select one of four option buttons
         ( ) Internal view
         ( ) External view
         ( ) Tracking view
         ( ) Roaming view
      [Check Box] restrict user to manipulate the camera - check to set user limits on camera controls
         [Check Box] allow internal view
         [Check Box] allow external view
         [Check Box] allow tracking view
         [Check Box] allow roaming view
         [Check Box] allow change of view mode
         [Check Box] allow change vehicle in train
         [Check Box] allow change trains
         [Check Box] allow adjust camera viewpoint
      [Check Box] set camera angles - check to set the initial camera view point
         Yaw (90 = look at front of train): <value> degrees - enter yaw angle 
         Pitch (-90 = down, 90 = up): <value> degrees - enter pitch angle
         Distance from the focused object: <value> metres - enter distance from camera to object

Related Rules:
   Cinematic Camera Rule - provides several different cinematic style cameras with animations
   Set Camera Rule] - sets the target object and properties of the camera
   Wait for Camera View Mode Rule - executes child rules when the camera view is changed

Generic TreeNode Debug Window Rule

No description.

<kuid:30501:1042>

Base Rule

Properties:
   None

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

H, I, J

Hide Product Overlays Rule

Hides the commodity or product bar graphs that appear on active industries

<kuid:400048:100970>

DLS Rule by callavsg

Properties:
  None

InputTable Rule

Creates a list of message names to be used for various purposes including passing data to Driver Commands

<kuid2:131986:1012:1>

Built-in Rule

Properties:
   <add> - click to add a new entry to the table
   Each new entry will require an input message
      <short message> - enter a message. The message must be in a format that is specific for each purpose
      For the MoveTurntable driver command the message must be formatted as:-
         turntable,name_of_turntable,number_of_connecting_roads - the first entry must be the word turntable in lower case.
            name_of_turntable is the name of the turntable, 
            number_of_connecting_roads is the number of tracks connecting to the turntable
      For the WaitUntilTime driver command the message must be formatted as:-
         time,hour,minute - the first entry must be the word time in lower case, 
            hour must be from 0 to 23, 
            minute must be from 0 to 59.
      For the WaitUntilSVariable driver command the message must be formatted as:-
         svar,svar_name,svar_condition,value - the first entry must be the word svar in lower case, 
            svar_name is the name of the session variable, 
            svar_condition is an equality (eg eq for equal, gt for greater than, etc)
            value is an integer value to be compared to the session variable.
   Each entry in the table will be followed by the commands:-
      cp - click to copy this entry to a new entry
      up - click to move this entry up one level
      dn - click to move this entry down one level
      rm - click to remove this entry from the table

Interlocking Tower Configure Path Rule

Alters settings on an interlocking tower path

<kuid:401543:3205>

Base Rule

Properties:
  Interlocking Tower <select> - to set Name and Objects

Related Rules:
   Interlocking Tower Path Selection UI Rule - automatically reacts to messages from Interlocking Towers and displays a path selection dialog to the player.
   Interlocking Tower Set Path Rule - sets the state of an interlocking tower path for a train
   Interlocking Tower Enhanced Manager Rule (SP2 and later) - more management and control options for interlocking towers.

Interlocking Tower Path Selection UI Rule

Will automatically react to messages from Interlocking Towers and display a path selection dialog to the player. Disable by removing rule from session

<kuid:401543:3203>

Base Rule

Properties:
  [Checkbox] Show path activation message in Driver

Related Rules:
   Interlocking Tower Configure Path Rule - alters the settings on an interlocking tower path
   Interlocking Tower Set Path Rule - sets the state of an interlocking tower path for a train
   Interlocking Tower Enhanced Manager Rule (SP2 and later) - more management and control options for interlocking towers.

Interlocking Tower Set Path Rule

Will set the state of an interlocking tower path for a train

<kuid:401543:3204>

Base Rule

Properties:
  Interlocking Tower <select> - to set Name and Objects

Related Rules:
   Interlocking Tower Configure Path Rule - alters the settings on an interlocking tower path
   Interlocking Tower Path Selection UI Rule - automatically reacts to messages from Interlocking Towers and displays a path selection dialog to the player.
   Interlocking Tower Enhanced Manager Rule (SP2 and later) - more management and control options for interlocking towers.

Interlocking Tower Enhanced Manager Rule (SP2 and later)

Provides more management and control options for interlocking towers.

<kuid2:61392:8130:41>

DLS Rule by pguy

Properties:
   <towers> - click to select interlocking towers from the session list
      <do full check again> - click to run an error check on all interlocking towers
      List of all available interlocking towers - for each tower:-
         <view details> - click to view and edit the tower properties
         <copy from> - click to copy properties from another tower selected from the session list
   <debug log> - click to set the debug log properties

Related Rules:
   Interlocking Tower Configure Path Rule - alters the settings on an interlocking tower path
   Interlocking Tower Path Selection UI Rule - automatically reacts to messages from Interlocking Towers and displays a path selection dialog to the player.
   Interlocking Tower Set Path Rule - sets the state of an interlocking tower path for a train

Junction Derailment Prevention Rule

Sets opposing (trailing) junctions ahead of a train to prevent derailments. Works with both AI and manually driven trains.

<kuid2:121843:100282:1>

DLS Rule by pitkin

Properties:
   None

Note: Will not overrule a junction already locked by another AI train or locked against AI control using the Set Junctions Rule.

Related Rules:
   Lock All Junctions Rule - locks all junctions against user control
   Set Junctions Rule - sets the selected junctions to a specific state (switch direction, locked/unlocked, allow/prevent AI control).

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

K, L, M

Lock All Junctions Rule

Locks all junctions against user actions. AI operations are not affected. Once the AI releases a junction, it will be returned to its previous locked state.

<kuid:400048:100971>

DLS Rule by callavsg

Properties:
   None

Notes:
  Individual junctions can still be set, locked and unlocked by using the Set Junction Rule

Related Rules:
    Set Junctions Rule - sets junctions to specific directions, locks and unlocks junctions, allows or denies AI control

MaxPermittedSpeed Rule

Sets the maximum permitted speed of locomotives under AI control

<kuid2:60850:89000:7>

Built-in Rule

Properties:
   None

Note: This rule cannot be configured from the Session Rules list. It must be configured in the config.txt file of each locomotive. 
   Instructions with an example are shown in the rule Properties

mc Display Custom HUD V2 Rule (SP2 and later)

Shows or hides a graphical HUD which includes junction direction for the junction ahead. This rule has been superseded by the Quick CustomHUD Manager Rule (SP2 and later)

<kuid2:61392:1072:10>

DLS Rule by pguy

Properties:
    Show or Hide the Custom Heads up Display - select one of two option buttons:-
    ( ) Show the Custom Heads up Display
    ( ) Hide the Custom Heads up Display

Related Rules:
   Display Custom HUD Rule - shows or hides the Custom Heads Up Display.
   Flash HUD Icon Rule - flashes a HUD panel icon for a set duration.
   Quick CustomHud Manager Rule (SP2 and later) - creates custom HUDs that can be assigned to different drivers
   Show/Hide HUD Panel Rule - shows or hides a HUD panel.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.
   Wait for Click on HUD Icon Rule - executes child rules when a HUD icon is clicked

Message Popup Rule

Displays a pop-up browser window and waits for it to be closed. Closure can be manual (by the user) or by another rule.

<kuid:-25:1003>

Built-in Rule

Properties:
   [Check Box] Pause game while message is displayed - stops the game until this message is closed
   [Check Box] Close previous popup windows - closes any Message Popups currently displayed before this message is shown
   Message location <Top Left/Top Right/Bottom Left/Bottom Right> - select one to position the browser window on the screen
   Message Source: - select one of three option buttons:-
      ( ) Custom text - the simplest and easiest option
         Icon <Click here to set> - (optional) shows a list of message icons. Select one to be displayed with the message
         Icon <Clear icon> - clears any currently displayed message icon
         Custom text box Enter text to be displayed. You will be limited to about 6 lines of text. 
            For longer messages or to include graphics, use the A predefined HTML page option.
      ( ) A predefined HTML page - requires a working knowledge of HTML
         <HTML Asset> - select the name of the HTML asset that contains the required HTML page from the list shown.
         <HTML Page> - enter the filename of the HTML page to be displayed. The page must be in the HTML asset identified above. 
             Filename is not case sensitive. Extension ".html" is optional.
         <HTML Wave> - (optional) select the name of the HTML file containing the wave file to be played. 
             The page must be in the HTML asset identified above. Filename is not case sensitive. Extension ".html" is optional.
         <Wave Name> - (optional) enter the name of a wave (.wav) sound file to be played. 
             The sound file must be in the HTML asset identified above. Filename is not case sensitive. Extension ".wav" is optional
        [Check Box] Autoplay Wave: - plays the .wav sound file as soon as message is displayed. 
           If unchecked sound will not be played.
      ( ) A predefined string-table entry from a HTML asset
         <HTML Asset> - select the name of the HTML asset from those installed that contains the required string-table.
         <String Table Token> - <function unknown at present>
         <HTML Wave> - (optional) select the name of the HTML file containing the wave file to be played. 
             The page must be in the HTML asset identified above. Filename is not case sensitive. Extension ".html" is optional.
         <Wave Name> - (optional) enter the name of a wave (.wav) sound file to be played. 
             The sound file must be in the HTML asset identified above. Filename is not case sensitive. Extension ".wav" is optional
         [Check Box] Autoplay Wave: - plays the .wav sound file as soon as message is displayed. 
             If unchecked sound will not be played.

Related Rule:
   Close Message Popup Rule - closes a displayed pop-up browser window.

Minimap Options Rule

Sets the display options for the minimap.

<kuid:-25:636>

Built-in Rule

Properties: Default values - all checked
   [Check Box] Map Textures
   [Check Box] Gradients
   [Check Box] Junctions
   [Check Box] Signals
   [Check Box] Triggers
   [Check Box] Markers
   [Check Box] Trackside Labels
   [Check Box] Terrain Objects
   [Check Box] Industrial Names
   [Check Box] Named Objects
   [Check Box] Consists

Related Rules:
   Show/Hide Minimap Rule - shows the minimap window in Driver.

Multiplayer Rule

Enables the session to be taken online in a Multiplayer environment.

<kuid:447264:1045>

Built-in Rule

Properties:
   Suggested maximum number of players for this session <value> - enter a number
   Maximum number of drivers per player <value> - enter a number
   Players are permitted to claim drivers             [Check Box] - check to allow players to select a driver
   Players can see each other's driver orders         [Check Box] - check to allow players to view orders for other players
   Automatically target an available train on clients [Check Box] - automatically assign a driver to each player

Multiple Junction Alignment Check Rule

Executes child rules if specific junctions are set.

<kuid:-25:168>

Built-in Rule

Parent Rule

Properties:
   Wait until <selection> - select from:-
      any one - any of the junctions in the rule list (below) is set correctly
      all - ALL of the junctions in the rule list are set correctly
   <Add junction> - click to select a junction from the session list
   <Add all> - click to select ALL junctions in the session list
   <Delete all> - click to delete ALL selected junctions from the rule list
      For each selected junction:-
      <setting> - click to select one switch direction from:-
         Left
         Right
         Center
         Any
      <remove> - to delete this junction from the rule list

Related Rules:
   Lock All Junctions Rule - locks all junctions against user control
   Set Junctions Rule - sets junctions to specific directions, locks and unlocks junctions, allows or denies AI control.

Multiple Resource Check Rule

Executes child rules if industries or vehicles reach set commodity levels. This rule replaces the older Resource Check Rule

<kuid:-25:656>

Built-in Rule

Parent Rule

Properties:
   <Product Level> - click to select a product test from two choices:-
      Reach/Exceed - sets an upper limit for the resources being monitored. 
         For example: the rule will be triggered if the quantity of coal in a coal loader stockpile or a coal wagon reaches or exceeds a specified level.
         The initial level in the object must be below the set upper limit.
      Fall below - sets a lower limit for the resources being monitored. 
         For example: the rule will be triggered if the quantity of coal in a coal loader stockpile or a coal wagon falls below a specified level. 
         The initial level in the object must be above the set lower limit. 
         To test when a resource level reaches zero (i.e. is empty) set the lower limit to a very low value but not zero as the level can never fall below zero. 
   <value> - enter required quantity value
   <select> - select a product from session list of products
   <Add object> - click to select a source or target object. Multiple objects and their queues can be added to the rule. 
      ALL the entered products must reach/exceed or fall below the specified value for the rule to be triggered. 
      For each object:-
         <Object> - click to select session active industry or product enabled rail vehicle 
         <Queue> - select product queue (there may be only one available)
         <Remove> - removes the object and its product queue from the rule

Related Rules:
   Resource Check Rule - executes child rules when set resource (commodity) levels are reached

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

N, O

Navigation Display Rule

Creates a set of navigation points. Multiple sets can be created by adding additional copies of this rule. This rule creates the navigation set, it does not display it.

<kuid2:401543:1161:1>

Base Rule

Properties:
Unique set ID: <click here to set> - enter a unique name for the navigation set. Name must be in lowercase and have no spaces.
Train (optional): <click here to set> - select a rolling stock asset from the session list shown.
Select one of three option buttons:-
( ) All points must be completed in sequence:
- the first uncompleted navigation point will be shown and must be completed next.
- the next point (if any) will also be shown partly transparent.
( ) Points will be completed in sequence, but can be skipped:
- navigation points can be skipped but must be completed in order.
- you cannot go back to complete a missed point.
( ) All points must be completed, but in any order:
- all uncompleted navigation points will be shown.
- you may complete them in any order.
For each navigation point:
<Click here to set> - select an item (trigger, trackmark, track object, rolling stock) from the session list to become the navigation point.
<Display text> - enter a text message to display with the navigation point. You are limited to 25 characters.
Icon <icon list> - select an icon for the navigation point.
<Style> - click to select one from three choices
Automatic - the navigation point will be completed as soon as the consist reaches the point.
Manual - the navigation point must be set as complete by using the Navigation point complete rule or the Navigation set clear rule.
The Manual style option allows you to execute other rules (e.g. consist check, wait, etc) before completing the navigation point.
Require Stop - the navigation point will be completed when the consist comes to a complete stop on the point.

Related Rules:
   Navigation Set Hide/Show Rule - makes a navigation set visible/invisible.
   Navigation Set Check Rule - executes child rules if a navigation set has completed or is incomplete.
   Navigation Set Clear Rule - completes (terminates) a navigation set.
   Navigation Point Complete Rule - manually completes (terminates) a specific navigation point in a set.
   Wait on Navigation Point Rule - executes child rules when a navigation point has been completed

Navigation Point Complete Rule

Manually completes a navigation point in a set

<kuid:401543:1167>

Base Rule

Properties:
   Mark navigation point <click here to set> - enter the navigation point number to be completed
   complete in set <click here to set> - enter the unique name for the navigation set created using the Navigation Display Rule.
        Name must be in lowercase and have no spaces.

Known Issues:
   The rule will NOT check to see if the named navigation set and point exists or not.

Related Rules:
   Navigation Display Rule - creates a set of navigation points.
   Navigation Set Hide/Show Rule - makes a navigation set visible/invisible.
   Navigation Set Check Rule - executes child rules if a navigation set has completed or is incomplete.
   Navigation Set Clear Rule - completes (terminates) a navigation set.
   Wait on Navigation Point Rule - executes child rules when a navigation point has been completed

Navigation Set Check Rule

Executes child rules if a navigation set created with the Navigation Display Rule is complete (or incomplete).

<kuid:401543:1165>

Base Rule

Parent Rule

Properties:
   Checks if navigation point set <name>: - enter the unique name for the navigation set created using the Navigation Display Rule.
        Name must be in lowercase and have no spaces.
   is <Complete/Incomplete> - click to select one

Known Issues:
   The rule will NOT check to see if the named navigation set exists or not.

Related Rules:
   Navigation Display Rule - creates a set of navigation points.
   Navigation Set Hide/Show Rule - makes a navigation set visible/invisible.
   Navigation Set Clear Rule - completes (terminates) a navigation set.
   Navigation Point Complete Rule - manually completes (terminates) a specific navigation point in a set.
   Wait on Navigation Point Rule - executes child rules when a navigation point has been completed

Navigation Set Clear Rule

Clears a navigation set removing any uncompleted navigation points

<kuid:401543:1164>

Base Rule

Properties:
   <Click here to set> - enter the unique name for the navigation set created using the Navigation Display Rule.
       Name must be in lowercase and have no spaces.

Known Issues:
   The rule will NOT check to see if the named navigation set exists or not.

Related Rules:
   Navigation Display Rule - creates a set of navigation points.
   Navigation Set Hide/Show Rule - makes a navigation set visible/invisible.
   Navigation Set Check Rule - executes child rules if a navigation set has completed or is incomplete.
   Navigation Point Complete Rule - manually completes (terminates) a specific navigation point in a set.
   Wait on Navigation Point Rule - executes child rules when a navigation point has been completed

Navigation Set Hide/Show Rule

Shows and hides navigation sets. You can have multiple sets visible and hidden at the same time.

<kuid:401543:1163> Base rule

Properties:
   <visibility> - click to select one
      Hide - select to make the navigation set invisible
      Show - select to make the navigation set visible
   <click here to set> - enter the unique name for the navigation set created using the Navigation Display Rule.
        Name must be in lowercase and have no spaces.

Known Issues:
   The rule will NOT check to see if the named navigation set exists or not.

Related Rules:
   Navigation Display Rule - creates a set of navigation points.
   Navigation Set Check Rule - executes child rules if a navigation set has completed or is incomplete.
   Navigation Set Clear Rule - completes (terminates) a navigation set.
   Navigation Point Complete Rule - manually completes (terminates) a specific navigation point in a set.
   Wait on Navigation Point Rule - executes child rules when a navigation point has been completed

Objective Add Rule

Sets up a game Objective with ID and display Name

<kuid:401543:2001>

Base Rule

Properties:
   Priority <Select> - select one of:-
      Above Normal
      Below Normal
      Normal
      Optional
      Urgent
   Completion Target Number <value> - to set Completion Target Number
   Icon <select> - to select Icon from list
   Display Name <enter> - to insert Name
   Unique Objective ID <enter> - enter a unique objective ID
   Custom Message <Text Box> - insert typed message in text area

Related Rules:
   Objective Check Rule - executes child rules if an objective is completed
   Objective Update Rule - changes the progress of a game objective

Objective Check Rule

Executes child rules if an objective created with the Objective Add Rule is complete.

<kuid:401543:2003>

Base Rule

Parent Rule

Properties:
   Unique Objective ID <value> - enter the unique ID created with the Objective Add Rule 
   Mode <select> - select one of three:-
      Wait for completion
      Wait for failure
      Wait for progress

Related Rules:
   Objective Add Rule - sets up a game objective
   Objective Update Rule - changes the progress of a game objective

Objective Update Rule

Changes progress of an objective outcome created with the Objective Add Rule according to Property choices

<kuid:401543:2002>

Base Rule

Properties:
   Unique Objective ID <value> - enter the unique ID created with the Objective Add Rule 
   Mode <select> - select one from the following options
      Decrement progress
      Increment progress
      Reset Objective
      Set objects as complete
      Set objects as failed
      Set progress
      Set progress only if greater
   Amount <value> - click to enter a value

Related Rules:
   Objective Add Rule - sets up a game objective
   Objective Check Rule - executes child rules if an objective is completed

Ordered List Rule

Executes child rules in order once this rule starts

<kuid:-25:171>

Built-in Rule

Parent Rule

Properties:
 Select one of two option buttons:-
  ( ) This process will repeat <value> time(s) - enter the number of times this rule is to be repeated
  ( ) This process will repeat forever

Known Issues:
   Some child rules will force a "wait" until certain conditions have been met (e.g. a mouse click or a set time has passed).
   These rules will delay the completion of any following child rules in the Ordered List Rule.

Related Rules:
   Progressive List Rule - executes the first child rule on the first run, the second child on the second run, etc
   Random List Rule - executes ONE randomly selected child rule
   Reset List Rule - executes all child rules continuously
   Simultaneous List Rule - executes all child rules simultaneously

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

P, Q

Play Sound Rule

Plays a wav sound file.

<kuid:-25:1045>

Built-in Rule

Properties:
   Default HTML <Click> - click to to enter Sound File Name
   HTML Assets <Click> - click to select HTML asset
   Rule Completes <Click> -  to select one of:-
      sound has just started
      sound has finished playing

Related Rules:
   Display Video Rule - displays a page containing a video clip from a HTML asset in a browser window

Power Station Rule

Sets up a Power Station and its electricity consumers

<kuid:-25:746>

Base Rule

Properties:
   Power station <select> - select a Power Station from the session list.
   Consumers:
      <add object> - add power consumers from the session list

Progressive List Rule

Executes the first child rule on the first run, the second child on the second run, the third child on the third run, etc.

<kuid:-25:754>

Built-in Rule

Parent Rule

Properties:
  After last child has been executed ...
  <successive runs will do nothing/the first child is chosen again> - click to select one

Related Rules:
   Ordered List Rule - executes child rules in order
   Random List Rule - executes ONE randomly selected child rule
   Reset List Rule - executes all child rules continuously
   Simultaneous List Rule - executes all child rules simultaneously

Quick Session Variables Rule

Allows the editing of session variables

<kuid2:61392:5003:30>

DLS Rule by pguy

Properties:
   <local> - click to edit local variables
      <add new session variable> - click to enter the name of new local variable
         for each variable:-
         <variable-name> - click to change variable name
         <type> - click to select one of:-
            string - text characters
            int - integer
            float - real (decimal) numbers
            bool - boolean (true/false)
            stringset - meaning not known at this time
            stringlist - meaning not known at this time
            tkmlist - trackmark list (no longer supported in TANE SP2)
            platformlist - platform list (no longer supported in TANE SP2)
            del - delete variable
            edit - edit variable
   <trains> - click to edit a train variable
      <train selected> - click to select a train from the session list. Initially none is selected
         <select train> - click to select a locomotive
         <select vehicle> - click to select a rail vehicle
         for the selected loco/vehicle:-
            <Add new session variable> - click to enter the name of a new variable
              for the entered variable:-
                 <variable-name> - click to change variable name
                 <type> - click to select type (see list above)
   <objects> - no longer supported in TANE SP2
   <global> - no longer supported in TANE SP2

Known Issues: Rule creator, pguy has indicated that the future of this rule is uncertain as parts of it have been devalued in the latest release of TANE.

Related Rules:
   Variable Check Rule - executes child rules according to the value of a specified variable.
   Variable Modify Rule - changes the value of a specified variable.
   Variable Modify Continuous Rule - continuously changes the value of a specified variable.
   Variable Random Rule - assigns a random value to a variable.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.

QuickDrive Rule

Changes the Session settings.

<kuid:401543:1184>

Base Rule

Properties:
  Open QuickDrive window when session is started          [Check Box] - check to set
  Set time to <hours:minutes> with a rate of <speed x> - set start time and rate at which time advances
  Enable gameplay Session Mode                            [Check Box] - check to set. Gameplay mode restricts the players options
  Enable in game help by default                          [Check Box] - check to allow help options to be displayed
  Set the default Control method to: - select one of two option buttons:-
     ( ) Easy Mode
     ( ) Realistic Mode
     [Check Box] Prevent player from changing this setting - check to set
  Realistic mode requires achievement: <text> in asset <asset name> - enter achievement name and select an asset from Aurans Achievements
  Set the default derailment realism to: - select one of three option buttons:-
     ( ) None
     ( ) Arcade
     ( ) Realistic
     [Check Box] Prevent player from changing this setting - check to set
  Set the default units to: - select one of three option buttons:-
     ( ) Imperial
     ( ) Metric
     ( ) Default

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

R

Random List Rule

Executes ONE randomly selected child rule once only. The rule will not repeat to randomly select another child rule

<kuid:-25:758>

Built-in Rule

Parent Rule

Properties:
   None

Related Rules:
   Ordered List Rule - executes child rules in order
   Progressive List Rule - executes the first child rule on the first run, the second child rule on the second run, etc
   Reset List Rule - executes all child rules continuously
   Simultaneous List Rule - executes all child rules simultaneously

Random Weather Rule v2

Randomly changes the weather conditions between set values over a set duration.

<kuid:169301:100132>

DLS Rule by terry_wagstaff

Properties:
   Starting weather <select> - select one of:-
         Clear weather, no clouds, rain or snow
         Cloudy weather, no rain 
         Drizzle, light rain
         Rain
         Stormy weather that includes lightening and thunder
         Snowing lightly
         Medium snowfall
         Heavy snow
   Best weather <select> - select one of:-
         Clear weather, no clouds, rain or snow
         Cloudy weather, no rain 
         Drizzle, light rain
         Rain
         Stormy weather that includes lightening and thunder
         Snowing lightly
         Medium snowfall
         Heavy snow
   Worst weather <select> - select one of:-
         Clear weather, no clouds, rain or snow
         Cloudy weather, no rain 
         Drizzle, light rain
         Rain
         Stormy weather that includes lightening and thunder
         Snowing lightly
         Medium snowfall
         Heavy snow
   Changing about every: <value> mins - enter number of minutes between weather changes

Known issues:
   Do NOT use this rule as a child of an Ordered List Rule because any following rules will not be executed.

Related Rules:
   EIRS Weather Rule NE USA Rule - customize random weather rule relative to the North East Region of the United States
   Startup Options Rule - sets the weather conditions at the start of a Session

Randomize Rule

Generates a different set of random numbers each time the session is run.

<kuid:169301:100129>

DLS Rule by Terry_Wagstaff

Properties:
   None

Note: Place this rule near the top of the Session Rules list and ensure that there is at least 5 seconds before
   the call to a Random function.

Related Rules:
   Variable Random - sets a variable to a random integer value.

Ranked Session Begin Rule

Begins a ranked Session

<kuid:401543:2031>

Base Rule

Properties:
   Countdown Starting Value <value>
      hrs:
      min:
      sec:
   1 through 5 stars, points for each star <value> - enter number of points for each star rating
   Session timer mode: - select one of three option buttons:-
      ( ) Timer
      ( ) Countdown Starting value <value> - enter time hh:mm:ss
      ( ) None

Note: Times are Trainz clock time, not real time

Related Rules:
   Ranked Session Complete Rule - completes the active ranked Session

Ranked Session Complete Rule

Completes the active ranked Session

<kuid:401543:2032>

Base Rule

Properties:
   Set the active ranked session as: - select one of two option buttons:-
      ( ) Complete
      ( ) Failed
   [Check Box] Customize the completion message <text> - enter a text message

Related Rules:
   Ranked Session Begin Rule - begins a ranked Session

Replace Missing Vehicles Rule

Produces new trains to replace missing vehicles that have been removed from the session by the Clean Up Derailed Trains Rule

<kuid:447264:1214>

Built-in Rule

Properties:
   [Check Box] Respawn trains if they are abandoned for 10 minutes
   If checked:-
      Select one of two option buttons:-
         ( ) Respawn trains at their original locations
         ( ) Respawn trains from portals
            <+ Add a new portal> - click to enter the name of a portal, there can be more than one portal.
            Entered portal names that appear in red have not been found in the session

Related Rules:
   Clean Up Derailed Trains Rule - cleans up derailed train cars after a set time delay
   Wait for Derailment Rule - executes child rules when a derailment occurs

Reset List Rule

Executes ALL child rules continuously in an ongoing infinite cycle

<kuid:-25:762>

Built-in Rule

Parent Rule

Properties:
   None

Related Rules:
   Ordered List Rule - executes child rules in order
   Progressive List Rule - executes the first child rule on the first run, the second child rule on the second run, etc
   Random List Rule - executes ONE randomly selected child rule
   Simultaneous List Rule - executes all child rules simultaneously

Resource Check Rule

Executes child rules if a selected industry or vehicle reaches a set commodity level. This rule has been superseded by the Multiple Resource Check Rule

<kuid:-25:1067>

Built-in Rule

Parent Rule

Properties:
   Select one of two option buttons:-
      ( ) Watch industry queue
         Target Object <select> - select an industry from the session list
         Queue <select> - select a product queue from the selected industry
         Product <select> - select a product from the selected queue
         Amount <value> - enter a quantity
         Select one of two option buttons:-
            ( ) Complete when designated queue equals or exceeds required amount
            ( ) Complete when designated queue falls below required amount
      ( ) Watch vehicle
         Target Object <select> - select a rolling stock asset from the session list
         Queue <select> - select a product queue from the selected rolling stock
         Product <select> - select a product from the selected queue
         Amount <value> - enter a quantity
         Select one of two option buttons:-
            ( ) Complete when designated queue equals or exceeds required amount
            ( ) Complete when designated queue falls below required amount

Related Rules:
   Multiple Resource Check Rule - executes child rules when set resource (commodity) levels are reached

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

S-Se

Safety System Engaged Check Rule

Executes child rules if safety systems are applied.

<kuid:447264:1216>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger only once

Related Rules:
   Safety System Isolated Check Rule - executes child rules if safety systems have been isolated

Safety System Isolated Check Rule

Executes child rules if safety systems are isolated (disengaged).

<kuid:447264:1217>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger only once

Related Rules:
   Safety System Engaged Check Rule - executes child rules if safety systems have been engaged

Schedule Rule

Allows a schedule of timed events to be applied to a train

<kuid:-3:10185> Base Rule

Properties:
   Insert track mark <select> - select a track mark from the Session List
   Arrival and Departure Time <Select> - set time
      hh:mm:ss - in hours/minutes/seconds
   Current Train <select> - select from session list
   Insert destination <select> - select from session list

Note: Times are Trainz clock times, not real time

Related Rules:
   Driver Command Check Rule - executes child rules if the driver commands match a set list
   Driver Command Rule - specifies which commands will be available for the drivers
   Driver Schedule Rule - sets up a list of basic scheduled driver commands
   Driver Setup Rule - creates a list of drivers and assign them their orders
   Enable/Disable Driver Commands Rule - enable/disable specific driver commands on certain drivers

Session Complete Rule

Set session to a percentage of completion.

<kuid:447264:1011>

Base Rule

Properties:
   Set session to percent complete <value> - enter number as a percentage
   [Check Box] Separate achievements for completion - check to set

Related Rules:
   End Session Rule - end the Session with a fade out.

Session Debug Rule

Executes the first child if Debug mode is selected. Otherwise executes the second child rule.

<kuid:30501:100180>

Built-in Rule

Parent Rule

Properties:
   None

Note: When a session starts with this rule enabled, the player will be given the choice of running the session in Debug or Normal mode.
   Selecting Debug will execute the first child rule. Selecting Normal will execute the second child rule.

Session Metadata Rule

Sets session metadata in the config file. Info can be read by other systems and displayed to the player.

<kuid:401543:2036>

Base Rule

Properties:
   Type <Click> - click to select one of:-
      Simulation
      Challenge
   Length <value> - to enter number of minutes, default is 30 minutes
   Difficulty <Click> - click to select one of:-
      Normal - default
      Tutorial
      Easy
      Hard
      Expert

Note: Time is Trainz clock time, not real time

Set Camera Rule

Sets the target object and properties of the camera.

<kuid:-25:179>

Built-in Rule

Properties:
   [Check Box] Set the target object of the camera to: - if checked, select one of three option buttons:-
      ( ) Vehicle <click to select> - select a vehicle from the Session list
      ( ) Junction <click to select> - select a junction from the Session list
      ( ) Map Object <click to select> - select a named map object from the Session list
   [Check Box] Change the camera view mode to <click to select> - if checked, select one camera view mode from
      Cab View
      External View
      Tracking View
      Free Roaming
   [Check Box] Set the camera flags to enable/disable user access to - if checked, select as many of the following check boxes as needed
      [Check Box] Internal view mode - check to enable, uncheck to disable
      [Check Box] External view mode - check to enable, uncheck to disable
      [Check Box] Tracking view mode - check to enable, uncheck to disable
      [Check Box] Roaming view mode - check to enable, uncheck to disable
      [Check Box] View switching - check to enable, uncheck to disable
      [Check Box] Vehicle view switching - check to enable, uncheck to disable
      [Check Box] Train view switching - check to enable, uncheck to disable
      [Check Box] Camera adjustments (pan, zoom, etc) - check to enable, uncheck to disable

Related Rules:
   Cinematic Camera Rule - provides several different cinematic style cameras with animations
   Focus Camera Rule - sets the initial camera view and starting vehicle for a session
   Wait for Camera View Mode Rule - executes child rules when the camera view is changed

Set Coupler Masks Rule

Set the coupling/decoupling masks on the selected vehicles

<kuid:-25:980>

Built-in Rule

Properties:
   <Add vehicle> - click to select a vehicle from the session list
   <Add All> - click to add all vehicles in the session list
   <Delete All> - click to remove all added vehicles from this rule
      For each selected vehicle:-
      Coupling Mask
         Front and Back - choose for each
            Locked
            Unlocked
      Decoupling Mask
         Front and Back - choose for each
            Locked
            Unlocked
      <Remove> - click to remove this vehicle from the rule

Related Rules:
   Coupler Breakage Check Rule - executes child rules when a coupler breaks
   Coupler Breakage HUD Rule - adds a coupler stress and breakage warning to the HUD

Set Helper Icon Size Rule

Sets the size of helper icons such as the junction lever arrows.

<kuid:-25:791>

Built-in Rule

Properties:
  Junction Arrows Size <Click> - to set scale ratio smaller than default, default is 100%

Set HTML Pages Rule

Instructs the Display HTML Pages rule to perform specific operations. This rule has been superseded by the Message Popup Rule

<kuid:-25:792>

Built-in Rule

Properties:
   Operations to preform on the display HTML pages sequence browser
   Select one of six option buttons:-
      ( ) to instruct the sequence browser to <select> - to choose page operations
      ( ) to instruct the sequence browser to open the page <select> - enter the HTML page name
      ( ) to set browser parameters <select> - choose one of:-
         to Enable/Disable closing of the browser window by the user
         to Enable/Disable scrolling on the sequence browser window
         to Show/Hide the sequence browser window
      ( ) Set the following flag for the page named <select> - enter the HTML page name
         [Check Box] Hide/Close window on 'done' action
         [Check Box] Window has no 'done' button
         [Check Box] Disable scrolling(not implemented yet)
         [Check Box] Spare setting 1
         [Check Box] Spare setting 2
         [Check Box] Spare setting 3
         [Check Box] Spare setting 4
         [Check Box] Spare setting 5
      ( ) Use the page <select> (enter HTML page name) from the HTML asset <select> (select HTML asset)
      ( ) Use the string table entry <select> (enter Index) from the HTML asset <select> (select HTML asset)

Related Rules:
   Display HTML Pages Rule - displays HTML pages in a browser window.
   Message Popup Rule - displays a pop-up browser window and waits for it to be closed.
   Timed Limited Display HTML Rule (SP2 and later) - displays a HTML page in a browser window for a set time.

Set Junctions Rule

Sets the selected junctions to a specific state Warning: not compatible with Interlocking Tower Assets

<kuid:-25:1065>

Built-in Rule

Properties:
   Add Junction - click to select a junction from the session junction list
   Add All - click to add ALL junctions in the session junction list
   Delete All - click to remove ALL entered junctions from the rule
      Junction Options: - for each selected junction:-
         <direction> - click to select the junction direction
            Left
            Center
            Right
            Don't change
         <user control> - click to select a user control option
            Locked - the junction setting cannot be changed by the user
            Unlocked - the junction setting can be changed by the user
         <AI control> - click to select AI control
            Allows AI control - an AI train can switch the junction
            Blocks AI control - an AI train cannot switch the junction
         Remove - click to remove this junction from the rule list

Related Rules:
   Junction Derailment Prevention Rule - sets opposing junctions ahead of a train to prevent derailments
   Lock All Junctions Rule - locks all junctions against user control
   Multiple Junction Alignment Check Rule - executes child rules when junctions are aligned

Set Signal Extended Rule

Sets the state of a selected signal Warning: not compatible with Interlocking Tower Assets

<kuid2:47662:20002:4>

Built-in Rule

Properties:
   <Select signal> to <signal state> - click to select a signal from the session list and click to select a state from the list -
      Automatic
      Stop
      Stop then Continue
      Caution Left
      Caution Right
      Caution
      Advance Caution Left
      Advance Caution Right
      Advance Caution
      Proceed Left
      Proceed Right
      Proceed
      Slow
      Medium

Note: The signal must support the state selected otherwise there will be no change in the signal

Related Rules:
   Trigger Multiple Signals Rule - sets selected signals to DANGER (STOP) when selected triggers are activated

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

Sh-Sz

Show/Hide HUD Panel Rule

Shows or hides a HUD panel.

<kuid:-25:1047>

Built-in Rule

Properties:
   <Show/Hide> the <click to select> HUD panel - select Show or Hide and then select the HUD panel

Related Rules:
   Display Custom HUD Rule - shows or hides the Custom Heads Up Display.
   Flash HUD Icon Rule - flashes a HUD panel icon for a set duration.
   mc Display Custom HUD V2 Rule (SP2 and later) - shows or hides a graphical HUD.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.
   Wait for Click on HUD Icon Rule - executes child rules when a HUD icon is clicked

Show/Hide Layer Rule

Shows or hides a layer from Driver.

<kuid2:401543:1170:1>

Built-in

Properties:
  <visibility> - select one of two options
     Show - select to make the layer visible
     Hide - select to make the layer invisible
  <click here to set> - enter name of layer. Name is case sensitive.

Known Bugs:
   Layers set to Hide when a game is saved will be Shown when the game is reloaded

Known Issues:
   Rule will NOT check to see if the named layer exists or not

Show/Hide Minimap Rule

Shows the minimap window in Driver.

<kuid:-25:794>

Built-in Rule

Properties:
   <Show/Hide> the driver Minimap Window - click to switch between Show and Hide.

Related Rules:
   Minimap Options Rule - sets the display options for the minimap.

Show/Hide On-screen Help Rule

Shows or hides On-screen help in Driver.

<kuid:401543:2020>

Built-in Rule

Properties:
   On screen help (junction overlays, etc) - select one of three option buttons:-
      ( ) Show
      ( ) Hide
      ( ) Leave Unchanged
   On Screen Vehicle Names: -  - select one of three option buttons:-
      ( ) Show
      ( ) Hide
      ( ) Leave Unchanged

Signal Passed At Danger Check Rule

Executes child rules if a signal or stop mark is Passed at Danger (STOP).

<kuid2:60850:89007:2>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger only once

Simultaneous List Rule

Executes child rules simultaneously once this rule starts

<kuid:-25:1048>

Built-in Rule

Parent Rule

Properties:
   Rule completes when ... - click to chose one of the following:-
      one of the child rules has completed
      all child rules have reached a completed state
      all child rules have reached a "was completed" state

Related Rules:
   Ordered List Rule - executes child rules in order
   Progressive List Rule - executes the first child rule on the first run, the second child on the second run, etc
   Random List Rule - executes ONE randomly selected child rule
   Reset List Rule - executes all child rules continuously

Speeding Check Rule

Executes child rules if player controlled trains are over the local speed limit or over a set (custom) speed

<kuid2:60850:89004:3>

Built-in Rule

Parent Rule

Properties:
   Select one of two options to set a speed limit to be observed
      ( ) Watch for trains travelling above the posted speed limit
         <speed value> - click to enter a new overspeed tolerance value
         <speed units> - click to select one from the list:-
            Km/h - Kilometres per hour
            MPH - Miles per hour
            mps - metres per second
      ( ) Watch for trains travelling above a custom speed
         <speed value> - click to enter a new custom speed value
         <speed units> - click to select one from the list:-
            Km/h - Kilometres per hour
            MPH - Miles per hour
            mps - metres per second
            Warning: This option is very performance intensive and should only be used in sessions with few trains

Startup Options Rule

Specifies the starting options for the session. The weather settings will set the initial conditions, including the variability. To manually change the weather during play, use the Weather Rule.

<kuid:-16:10212>

Base Rule

Properties:
   Current control method is <select> - select one from:-
      Easy Mode - DCC (standard keyboard and mouse) control
      Ask User - let the user decide
      Realistic Mode - Cab controls (on screen levers, throttles, buttons, etc)
   Set weather to <select mode> with <select frequency> changeability - select
      Weather mode: - select one of:-
         Clear
         Cloudy 
         Drizzle
         Rain
         Stormy
         Light Snow
         Medium Snow
         Heavy Snow
      Changeability: - select one of:-
         Off - the weather will not change from the mode selected above
         Periodic - slow gradual changes to the weather
         Extreme - rapid and extreme changes to the weather
   Set time to <hours>:<minutes> with a rate of <select speed> - set the starting time and the speed at which the Trainz clock will run
   Set derailment realism to <select reality level> - select one of:-
      None - no train derailments will occur
      Arcade - train derailments will be exaggerated (beyond normal)
      Realistic - train derailments will occur as realistically as possible
   [Check Box] Show in game help - check to switch on help options
   Use <select measurement system> units in Driver - select one of:-
      Metric - kilometres, metres. This will override the default settings in a session
      Imperial - miles, feet. This will override the default settings in a session
      Default - uses the measurement system specified in the session

Note: Times are Trainz clock time, not real time

Related Rules:
   Time and Rate Rule - sets the session start time and the rate at which time passes.
   Weather Rule - changes weather conditions during Session play

Station Visited Check Rule

Executes child rules if specific trains call at set stations or industries

<kuid2:60850:89005:3>

Built-in Rule

Parent Rule

Properties:
   Trigger: <select> - click to select one of the following
      Never - stopping at the selected industries will never trigger the rule.
      Once only - the rule is triggered on the first visit only to any one of the selected industries
      Once per industry - the rule is triggered on the first visit to each industry with each individual product
      Once per visit - the rule is triggered on the first visit to each industry regardless of the product
      Once per vehicle - each vehicle can only trigger the rule once. 
   <select industry> - select industry or industries from session list
   Select one of two option buttons:-
      ( ) click to accept all trains
      ( ) click to accept trains matching specific criteria
         Selecting the second option will produce the following selection controls:-          
         Specific vehicle - identify the specific vehicle or set of specific vehicles that will trigger the rule
            + - click to add a specific vehicle from the session list
            x - click to remove the specific vehicle from the rule
         Vehicle types - identify the type of vehicle or a set of vehicle types that will trigger the rule
            + - click to add a type of vehicle from the session list
            x - click to remove the type of vehicle from the rule
         Drivers - identify the drivers that will trigger the rule
            + - click to add a driver from the session list
            x - click to remove a driver from the rule

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

T, U, V

Time and Rate Rule

Sets the session start time and the rate at which time passes.

<kuid:-25:889>

Built-in Rule

Properties:
   Set time to <hours:minutes> - enter the clock starting time as hours (0-23) and minutes (0-59)
   with a rate of <1x> - select a speed at which time will pass from 1x (normal) to 1440x (extremely fast)

Related Rules:
   Startup Options Rule - sets the startup options for a session including time and rate
   Timecheck Rule - executes child rules at a set time.

Timecheck Rule

Executes child rules at a set time.

<kuid2:122381:10008:3>

Built-in Rule

Parent Rule

Properties:
   <hh:mm:ss> - enter execution time as hours (0-23), minutes (0-59) and seconds (0-59).
   [Check Box] Execution time is on the day after the start time - when checked delays execution until the following day.

Known Issues:
   Do not use this rule as a child of a repeating rule such as the Simultaneous List Rule or the Ordered List Rule.

Note: Times and days are Trainz clock times not real time.

Related Rules:
   Time and Rate Rule - sets the session start time and the rate at which time passes.
   Wait Rule - executes child rules after waiting for a set number of seconds.

Timed Limited Display HTML Rule (SP2 and later)

Displays an HTML browser window for a limited time.

<kuid2:61392:2005:32>

DLS Rule by pguy

Properties:
  HTML Asset Name : <[Click to select HTML asset]> - click to select an HTML asset from those installed
  Page filename : <value> - click to enter the filename of the HTML page in the selected HTML asset. The .html filename extension is optional.
  Play duration (SessVar or duration in seconds) : <value> - enter a SessVar name or the number of seconds.
  Browser left position (SessVar or position) : <value> - enter a SessVar name or the number of pixels from the left screen edge.
  Browser top position (SessVar or position) : <value> - enter a SessVar name or the number of pixels from the top screen edge.
  Browser width (SessVar or position) : <value> - enter a SessVar name or the width in pixels.
  Browser height (SessVar or position) : <value> - enter a SessVar name or the browser height.
  [Check Box] <Alert is not reshowable on request/Alert is showable on request> - check or click to allow or prevent the user viewing the page again.

Note: Seconds are Trainz clock time, not real time.

Related Rules:
   Close Message Popup Rule - closes open message popups
   Display HTML Pages Rule - displays HTML pages in a browser window.
   Message Popup Rule - displays a pop-up browser window and waits for it to be closed.
   Set HTML Page Rule - sets parameters for the Display HTML Pages Rule

Trackside Check Rule

Executes child rules when a set train enters a set trigger. Similar to the Trigger Check Rule but provides different options.

<kuid2:46162:100207:1>

DLS Rule by Josefpav

Parent Rule

Properties:
   Applies to: - select one of three option buttons:-
      ( ) Junction
      ( ) Trigger
      ( ) Trackmark
   Trackside object name: <specify> - select object name from session list
   Wait for train to: - select one of three option buttons:-
      ( ) Enter
      ( ) Stop at
      ( ) Leave
   [Check Box] Auto reset this rule - check to execute the rule continuously
   Applies to train containing:
   <Add vehicle> - click to select a rail vehicle from the session list
   del - click to remove a selected vehicle from the rule

Related Rules:
   Trigger Check Rule - executes child rules when activated by a train

Trigger Check Rule

Executes child rules when a set train enters a set trigger. This rule replaces the older and less versatile Trigger Rule.

<kuid:-25:1071>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger only once 
   [Check Box] Wait for child rules to complete even if no trains are present in rule trigger
   [Check Box] Only activate when the entering vehicle of the train is heading <select direction> into the trigger - select one of two directions:-
      forward
      backward
   Triggers List
      <add trigger> - select a trigger from the session list
      <delete trigger> - delete a selected trigger from the rule
   Select one of two option buttons:-
      ( ) click to accept all trains
      ( ) click to accept trains matching specific criteria
         Selecting the second option will produce the following selection controls:-
         Specific vehicle - identify the specific vehicle(s) that will trigger the rule
            + - click to add a specific vehicle from the session list
            x - click to remove the specific vehicle from the rule
         Vehicle types - identify the type of vehicle(s) that will trigger the rule
            + - click to add a type of vehicle from the session list
            x - click to remove the type of vehicle from the rule
         Drivers - identify the driver(s) that will trigger the rule
            + - click to add a driver from the session list
            x - click to remove a driver from the rule

Related Rules:
   Trackside Check Rule - executes child rules when activated by a train. Provides different options to the Trigger Check Rule

Trigger Multiple Signals Rule

Sets selected signals to DANGER (STOP) when selected triggers are activated. Signals will be at AUTOMATIC when the triggers are not activated.

<kuid2:116387:26:1>

DLS Rule by maggs

Properties:
   <add signal> - select a signal from the Session List. More than one signal can be added.
      <delete> - remove a signal from the rule.
   <add trigger> - select a trigger from the Session List. More than one trigger can be added.
      <delete> - remove a trigger from the rule.

Related Rules:
   Set Signal Extended Rule - sets a selected signal to a specific signal state

Variable Check Rule

Executes child rules when a specific variable matches set conditions

<kuid:-25:1049>

Built-in Rule

Parent Rule

Properties:
   <variable-name> - enter a variable-name. Variable name is case sensitive.
   Mathematical relationship, select one of:-
      is less than - enter a <value> to test against
      is less than or equal to - enter a <value> to test against
      is equal to - enter a <value> to test against
      is greater than or equal to - enter a <value> to test against
      is greater than - enter a <value> to test against
      is not equal to - enter a <value> to test against
      is between x and y - enter a minimum <x-value> and a maximum <y-value>
   Evaluation type. Select one from:-
      <This condition will be evaluated only once ...> - any changes to the variable that occur after
              it has been checked will not change the result of this rule
      <This condition will be evaluated once every second> - the rule will be rerun and the variable 
              rechecked every second

Related Rules:
   Quick Session Variables Rule - allows the editing of session variables.
   Variable Modify Rule - changes the value of a specified variable.
   Variable Modify Continuous Rule - continuously changes the value of a specified variable.
   Variable Random Rule - assigns a random value to a variable.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.

Variable Modify Continuous Rule

Adds, subtracts or sets a value to a specified variable every second.

<kuid:-25:1051>

Built-in Rule

Properties:
  <Add/Subtract/Change variable to> - select one.
     <value> - enter value to add, subtract or apply to <variable-name>
     <variable-name> - enter variable-name. Variable-name is case sensitive.

Related Rules:
   Quick Session Variables Rule - allows the editing of session variables.
   Variable Check Rule - executes child rules according to the value of a specified variable.
   Variable Modify Rule - changes the value of a specified variable.
   Variable Random Rule - assigns a random value to a variable.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.

Variable Modify Rule

Change the value of a specified variable. This rule can also used to create a new variable and set its initial value by using the "Change variable" option.

<kuid:-25:1050>

Built-in Rule

Properties:
   Change <Add to variable/Subtract from variable/Change variable> - click to select one from:-
      Add to variable
         Add <value> to variable <variable-name> - enter value to add to variable, enter variable-name. Variable-name is case sensitive.
         <Do not undo the alteration if the rule is stopped/Undo the alteration if the rule is stopped> - click to select one.
      Subtract from variable
         Subtract <value> from variable <variable-name> - enter value to subtract from variable, enter variable-name.
            Variable-name is case sensitive.
         <Do not undo the alteration if the rule is stopped/Undo the alteration if the rule is stopped> - click to select one.
      Change variable
         Change variable <variable-name> to <value> - enter variable-name, enter new value. 
            Variable-name is case sensitive. This change cannot be undone if the rule is stopped. 
   [Check Box] (optional) Set the minimum value of <variable-name> to <value> - enter variable-name
      (this will already be set by the change option) and a value. Variable-name is case sensitive.
   [Check Box] (optional) Set the maximum value of <variable-name> to <value> - enter variable-name
      (this will already be set by the change option) and a value. Variable-name is case sensitive.

Related Rules:
   Quick Session Variables Rule - allows the editing of session variables.
   Variable Check Rule - executes child rules according to the value of a specified variable.
   Variable Modify Continuous Rule - continuously changes the value of a specified variable.
   Variable Random Rule - assigns a random value to a variable.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.

Variable Random Rule

Assigns a random integer value to a variable.

<kuid:400260:100606>

DLS Rule by tram_

Properties:
   Random variable <name> in minimum to maximum interval - enter name of variable. Variable-name is case sensitive.
   The minimum possible value of variable_name is <value> - enter the minimum value
   The maximum possible value of variable_name is <value> - enter the maximum value

Related Rules:
   Quick Session Variables Rule - allows the editing of session variables.
   Randomize - creates a different set of random numbers for each session run.
   Variable Check Rule - executes child rules according to the value of a specified variable.
   Variable Modify Rule - changes the value of a specified variable.
   Variable Modify Continuous Rule - continuously changes the value of a specified variable.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.

Variable Show Rule

Adds or removes a specified variable and a descriptive label to the custom HUD. This rule does not make the custom HUD appear on the screen.

<kuid:-25:971>

Built-in Rule

Properties:
  [Check Box] Add
     <variable-name> - enter variable-name to add to HUD. Variable-name is case sensitive.
     <label> - (optional) enter a short label to be displayed on the HUD in front of the variable value.
  [Check Box] Remove
     <variable-name> - enter variable-name to remove from HUD. Variable-name is case sensitive.

Related Rules:
   Display Custom HUD Rule - shows or hides the Custom Heads Up Display.
   Quick Session Variables Rule - allows the editing of session variables.
   Variable Check Rule - executes child rules according to the value of a specified variable.
   Variable Modify Rule - changes the value of a specified variable.
   Variable Modify Continuous Rule - continuously changes the value of a specified variable.
   Variable Random Rule - assigns a random value to a variable.

Vehicle Physics Rule

Overrides the default vehicle physics properties for all vehicles or for those matching set criteria

<kuid:-25:1052>

Built-in Rule

Properties:  
   Select one of two option buttons:-
      ( ) click to accept all trains
      ( ) click to accept trains matching specific criteria
         Selecting the second option will produce the following selection controls:-
         Specific vehicle - identify the specific vehicle or set of specific vehicles that will trigger the rule
            + - click to add a specific vehicle from the session list
            x - click to remove the specific vehicle from the rule
         Vehicle types - identify the type of vehicle or a set of vehicle types that will trigger the rule
            + - click to add a type of vehicle from the session list
            x - click to remove the type of vehicle from the rule
         Drivers - identify the drivers that will trigger the rule
            + - click to add a driver from the session list
            x - click to remove a driver from the rule
   Coupler Parameters:
      Couplers break at <value> kN expansion force - enter force value
      Couplers break at when coupling above <value> kph - enter speed value
      [Check Box] Show coupler breakage in HUD - check to display breakage in on-screen HUD
   Wheelslip Parameters:
      Maximum tractive effort adjusted by <value> % - enter adjustment as a %
      Traction is reduced to <value> % while wheelslipping - enter value as a %
      Traction boost is <value> % while sanding - enter value as a %
   Sway Parameters:
      Cab sway level is set to <value> % - enter value as a %

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

W, X, Y, Z

Wait for Camera View Mode Rule

Executes child rules when the camera view is changed to a selected view

<kuid:-25:192>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger rule once - check to set
   Wait for the camera to change to the <click to select> - select one camera view mode from:-
      Cab View
      External View
      Tracking View
      Free Roaming
   [Check Box] Wait for the camera to target vehicle <click to select> - if checked, select a vehicle from the Session list

Related Rules:
   Cinematic Camera Rule - provides several different cinematic style cameras with animations
   Focus Camera Rule - sets the initial camera view and starting vehicle for a session
   Set Camera Rule - sets the target object and properties of the camera

Wait for Click on HUD Icon Rule

Executes child rules when the user clicks on a selected HUD icon

<kuid:-25:951> <kuid:-25:970> - two versions built-in with different kuids, both have the same properties

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger Once
   HUD Panel <Click> - click choose from list:-
      Bottom Right Menu
      Camera Controls
      DCC Controls
   Icon <Click> - click to choose from list. Selections depends on HUD Panel chosen

Related Rules:
   Display Custom HUD Rule - shows or hides the Custom Heads Up Display.
   Flash HUD Icon Rule - flashes a HUD panel icon for a set duration.
   mc Display Custom HUD V2 Rule (SP2 and later) - shows or hides a graphical HUD.
   Show/Hide HUD Panel Rule - shows or hides a HUD panel.
   Variable Show Rule - adds or removes a specified variable and a descriptive label to the custom HUD.

Wait for Derailment Rule

Executes child rules when a derailment occurs

<kuid:-25:1053>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger derailment watch once - check to execute the rule once only

Related Rules:
   Clean UP Derailed Trains Rule - cleans up derailed train cars after a set time delay
   Replace Missing Vehicles Rule - creates a replacement train after a derailment

Wait for Driver On/Off Train Rule

Executes child rules when a driver gets on or off a train

<kuid:-25:953>

Built-in Rule

Parent Rule

Properties:
 [Check Box] Trigger Rule Once - click to set 
 Wait for a driver character to get <On/Off> a train that matches the following criteria - select On or Off
 Select one of two option buttons:-
    ( ) click to accept all trains
    ( ) click to accept trains matching specific criteria
       Selecting the second option will produce the following selection controls:-
       Specific vehicle - identify the specific vehicle or set of specific vehicles that will trigger the rule
          + - click to add a specific vehicle from the session list
          x - click to remove the specific vehicle from the rule
       Vehicle types - identify the type of vehicle or a set of vehicle types that will trigger the rule
          + - click to add a type of vehicle from the session list
          x - click to remove the type of vehicle from the rule
       Drivers - identify the drivers that will trigger the rule
          + - click to add a driver from the session list
          x - click to remove a driver from the rule

Related Rules:
   Wait for Driver/Train to be Locally Owned Rule - executes child rules when a vehicle or driver changes ownership

Wait for Driver/Train to be Locally Owned Rule

Executes child rules when a specific driver or vehicle is locally owned. If the driver/vehicle becomes unowned again the child rules are paused

<kuid2:401543:1173:1>

Built-in Rule

Parent Rule

Properties:
 Assets Ownership: - select one of two option buttons:-
    ( ) Wait for ownership of a specific Driver
    ( ) Wait for ownership of Driver
 Driver or Vehicle <select> - choose from session list

Related Rules:
   Wait for Driver On/Off Train Rule - executes child rules when a driver gets on or off a train

Wait on Navigation Point Rule

Executes child rules when a specific navigation point is completed

<kuid:401543:1168>

Base Rule

Parent Rule

Properties:
   navigation point <click here to set> - enter the number of the navigation point to be completed
   in set <click here to set> - enter the unique name for the navigation set created using the Navigation Display Rule.
      Name must be in lowercase and have no spaces.

Known Issues:
   The rule will NOT check to see if the named navigation set and point exists or not.

Related Rules:
   Navigation Display Rule - creates a set of navigation points.
   Navigation Set Hide/Show Rule - makes a navigation set visible/invisible.
   Navigation Set Check Rule - executes child rules if a navigation set is complete or incomplete.
   Navigation Set Clear Rule - completes (terminates) a navigation set.
   Navigation Point Complete Rule - manually completes (terminates) a specific navigation point in a set.

Wait on Train Stop/Start Rule

Executes child rules when a train stops or starts moving

<kuid:-25:1069>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger rule once 
   Wait for a train that matches the following criteria to <select> - select one of:-
      start moving
      stop moving
   Select one of two option buttons:-
      ( ) click to accept all trains
      ( ) click to accept trains matching specific criteria
         Selecting the second option will produce the following selection controls:-
         Specific vehicle - identify the specific vehicle or set of specific vehicles that will trigger the rule
            + - click to add a specific vehicle from the session list
            x - click to remove the specific vehicle from the rule
         Vehicle types - identify the type of vehicle or a set of vehicle types that will trigger the rule
            + - click to add a type of vehicle from the session list
            x - click to remove the type of vehicle from the rule
         Drivers - identify the drivers that will trigger the rule
            + - click to add a driver from the session list
            x - click to remove a driver from the rule

Wait on Waybill Screen/Main Screen Rule

Executes child rules when the Waybill window is opened or closed

<kuid:-25:957>

Built-in Rule

Parent Rule

Properties:
   [Check Box] Trigger rule once - check to trigger the rule once only
   Wait for the Waybill window to be <opened/closed> - select either opened or closed.

Wait Rule

Executes child rules after waiting for set number of seconds

<kuid2:122381:10016:2>

Built-in Rule

Parent Rule

Properties:
   <click to set> - enter the number of seconds for the wait delay

Note: Seconds is in Trainz clock time, not real time

Related Rules:
   Timecheck Rule - executes child rules at a set time.

Weather Rule

Changes the weather conditions during Session play.

<kuid:-25:960>

Built-in Rule

Properties:
   Set weather to <select mode> with <select frequency> changeability - select
      Weather mode: - select one of:-
         Clear
         Cloudy 
         Drizzle
         Rain
         Stormy
         Light Snow
         Medium Snow
         Heavy Snow
    Changeability: - select one of:-
         Off - the weather will not change from the mode selected above
         Periodic - slow gradual changes to the weather
         Extreme - rapid and extreme changes to the weather

Related Rules:
   EIRS Weather Rule NE USA Rule - customize random weather rule relative to the North East Region of the United States
   Random Weather Rule v2 - randomly changes the weather according to entered parameters
   Startup Options Rule - sets the weather conditions at the start of a Session

Back to Top | A, B | C | D | E, F, G | H, I, J | K, L, M | N, O | P, Q | R | S-Se | Sh-Sz | T, U, V | W, X, Y, Z

@@ Line 900: / Line 900: @@
 ==='''mc Display Custom HUD V2 Rule (SP2 and later)'''===
-Shows or hides a graphical HUD which includes junction direction for the junction ahead
+Shows or hides a graphical HUD which includes junction direction for the junction ahead. This rule has been superseded by the '''Quick CustomHUD Manager Rule (SP2 and later)'''
 '''<kuid2:61392:1072:10>'''
@@ Line 914: / Line 914: @@
      '''[[#Display Custom HUD Rule|Display Custom HUD Rule]]''' - shows or hides the Custom Heads Up Display.
      '''[[#Flash HUD Icon Rule|Flash HUD Icon Rule]]''' - flashes a HUD panel icon for a set duration.
+    '''[[#Quick CustomHud Manager Rule (SP2 and later)|Quick CustomHud Manager Rule (SP2 and later)]]''' - creates custom HUDs that can be assigned to different drivers
      '''[[#Show/Hide HUD Panel Rule|Show/Hide HUD Panel Rule]]''' - shows or hides a HUD panel.
      '''[[#Variable Show Rule|Variable Show Rule]]''' - adds or removes a specified variable and a descriptive label to the custom HUD.

Session Rule List with Parameters

Revision as of 14:26, 25 April 2018

Contents

A, B

Achievement Check Rule

Advanced Industry Load Configuration Rule

AI Start Rule

AI Stop Rule

ATP Speed Limiter Rule

AWS Configuration Rule

C

Cinematic Camera Rule

Clean Up Derailed Trains Rule

Clock Rule

Close Message Popup Rule

Consist Check Rule

ConsistDataHandler Rule

Control Check Rule

Control Type Rule

Coupler Breakage Check Rule

Coupler Breakage HUD Rule

Custom Script Rule

D

DestSign Table Rule

Disable/Enable Industry Rule

Disallow AI Rule

Display Custom HUD Rule

Display HTML Pages Rule

Display Video Rule

Driver Command Check Rule

Driver Command Rule

Driver Main Menu Options Rule

Driver Schedule Rule

Driver Setup Rule

E, F, G

EIRS Weather Rule NE USA Rule

Enable/Disable Driver Commands Rule

End Session Rule

Fade In/Out Rule

Flash HUD Icon Rule

Focus Camera Rule

Generic TreeNode Debug Window Rule

H, I, J

Hide Product Overlays Rule

InputTable Rule

Interlocking Tower Configure Path Rule

Interlocking Tower Path Selection UI Rule

Interlocking Tower Set Path Rule

Interlocking Tower Enhanced Manager Rule (SP2 and later)

Junction Derailment Prevention Rule

K, L, M

Lock All Junctions Rule

MaxPermittedSpeed Rule

mc Display Custom HUD V2 Rule (SP2 and later)

Message Popup Rule

Minimap Options Rule

Multiplayer Rule

Multiple Junction Alignment Check Rule

Multiple Resource Check Rule

N, O

Navigation Display Rule

Navigation Point Complete Rule

Navigation Set Check Rule

Navigation Set Clear Rule

Navigation Set Hide/Show Rule

Objective Add Rule

Objective Check Rule

Objective Update Rule

Ordered List Rule

P, Q

Play Sound Rule

Power Station Rule

Progressive List Rule

Quick Session Variables Rule

QuickDrive Rule

R

Random List Rule

Random Weather Rule v2

Randomize Rule

Ranked Session Begin Rule